|
manual abstract
Note If you keep the fridge-freezer in a hot, and humid place, frequently open its door or put a lot of vegetables in it, dew may form in it, which has no effect on its performance. Remove the dew with dust cloth free from care. 41 Care and Maintenance Power Failure General Information • 1~2 hour power failure does no harm to the foods stores. Try to avoid opening and closing the door too frequently. If You Move Anti Condensation Pipe • Take out foods from the fridge-freezer and firmly fix the loose items with tape. • Turn the leveling screws until they stop before moving the fridge-freezer. Otherwise the screw may scratch the floor or the fridge-freezer cannot move. • The Anti-Condensation pipe is installed around the front side of fridge-freezer as well as on the partition between fridge compartment and freezer compartment to prevent dewing. • Especially after installation or when ambient temperature is high, the fridge-freezer may feel hot, which is quite normal. 42 .. 42 .. Care and Maintenance Care and Maintenance Lamp Replacement w ww Caution 1. Unplug the power cord from the outlet. 2. Remove the room lamp lid by taking down while pulling its back projection. 3. Remove the lamp by turning it counterclockwise and replace new one. 4. Assemble in reverse order of disassembly. Replacement bulb must be the same specification as original. • You must check the O-RING, which is made by rubber and prevent electric spark. • Don’t touch the lamp, in case of light on the long time. Because it can be very hot. Note • Lamp capacity is MAX 30W. • The lamp will remain “ON” for 7minutes if the door is left open and then it is “OFF” for safety. (If you reopen the door, the lamp is “On”.) To Reverse the Doors w ww Caution • Your fridge-freezer is designed with reversible doors, do that they may open from either the left of right hand side to suit your kitchen design. However, When you want to reverse the doors, you must be calling to service agent. 43 Care and Maintenance Before Cleaning Cleaning Be sure to unplug the power. If you want to take out an opti fresh zone drawer of a refrigerator, Take out the drawer after remove a basket in front of drawer. Interior If snow layer more than 3mm forms in the freezing compartment or cooling compartment. It can be removed with the plastic spatula, included in the delivery set, the refrigerator should be unplugged for defrosting and clean. To clean the interior freezer room easily. Above all things draw off a middle freezer drawer and empty the rest of freezer drawers before defrosting. The snow layer hinders cold transfer to products, increases cooling time and reduces quality of products, raising power consumption. It is prohibited to use metal objects for snow layer removal. It is recommended to clean the freezing compartment after each defrosting, but at least twice a year. After Cleaning ww Warning Check that the power cord is not damaged, power plug has not overheated, and that the power plug is tightly inser...
Other models in this manual:Refrigerators - GA-419BLCA (376.81 kb)
Refrigerators - GA-449BLBA (376.81 kb)
Refrigerators - GA-449BLCA (376.81 kb)
Refrigerators - GA-449BLLA (376.81 kb)