Votes - 2, Average rating: 4 ( )

Manafacture: Samsung File size: 10.49 mb File name: Language of manual:

4. After you plug the refrigerator in, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the refrigerator after the temperature is sufficiently cool. Operating your French Door Refrigerator USING THE CONTROL PANEL 1 2 3 7 5 6 8 910 4 ( 1 ) Energy( 1 ) Energy SaverSaver Press the Energy Saver button for better energy efficiency. The Energy Saver icon lights up when you press the Energy Saver button. The Energy Saver function is automatically set to “ON” when power is supplied to the refrigerator. If condensation or water drops appear on the doors, turn the Energy Saver mode off. ( 2 ) Power( 2 ) Power Freeze Freeze The Power Freeze function substantially speeds up the freezer compressor, causing the freezer to cool down rapidly to a temperature you choose. When you press the Power Freeze button, the Power Freeze icon lights up. Power Freeze is useful if you need to quick freeze an item, to make a large quantity of ice, or to cool the freezer rapidly if it has warmed dramatically (for example, if the door was left open). To turn off Power Freeze, press the Power Freeze button again. Power Freeze turns off automatically after 72hours to decrease energy consumption. When you use this function the energy consumption of the refrigerator will increase. Remember to turn it off when you don’t need it and return the freezer to your original temperature setting. If you need to freeze large amount of food stuff, activate Power Freeze function at least 24 hours before. 12_ operating DA68-01922A.indb DA68-01922A.indb 12 2012.5.16 2012.5.16 2:59:1 PM 12 2:59:1 PM ( 3 ) Alarm /( 3 ) Alarm / hold 3hold 3 sec forsec for FilterFilter ResetReset ( 3 ) Alarm / hold 3hold 3 sec forsec for FilterFilter ResetReset (Filter Reset) (Blue) (Red) ( 4 ) Lighting( 4 ) Lighting ( 5 ) Power( 5 ) Power CoolCool The Alarm/Hold 3 sec for Filter Reset button serves two purposes: -To turn the door open alarm on and off -To reset the water filter life indicator. 1) Door Alarm Function If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for more than three minutes. The beeping stops when you close the door. The door alarm function is pre-set to On in the factory. You can turn it off by pressing and then releasing the Alarm/ Hold button. You can turn it back on in the same fashion. The icon lights up when the function is on. 2) Water Filter Life Indicator Function After you replace the water filter, press and hold the Alarm/Hold 3 sec for Filter Reset button to re-set the water filter life indicator. When you re-set the water filter life indicator, the Filter icon on the panel turns blue, green, or yellow. The Filter icon will turn red to let you know it is time to change the water filter after six months (about 300 gallons). Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly. If this is the case in your area, you will have to change the filter more frequently than every six months. Pressing the Lighting button turns on the Dispenser LED lamp (under the display) in continuous mode so that it stays on continuously. The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser, press the Lighting button to turn the continuous mode off. The Power Cool function substantially speeds up the refrigerator compressor, causing the refrigerator to cool down rapidly to a temperature you choose. When you press the Power Cool button, the Power Cool icon lights up. Power Cool is useful if you need to quickly cool items or need to cool the refrigerator rapidly if it has warmed dramatically (for example, if the door was left open). To turn off Power Cool, press the Power Cool button again. Power Cool turns off automatically after 2 1/2 hours to decrease energy consumption. When you turn on Power Cool, the refrigerator's compressor speeds up and is louder than during normal operation. ( 6 ) Ice Off( 6 ) Ice Off (Hold 3(Hold 3 sec forsec for child lock)child lock) (7) Cubed Ice(7) Cubed Ice (8) Crushed(8) Crushed IceIce (Cubed) (Crushed) Cooling OffCooling Off ModeMode ( 9 ) Ice Off( 9 ) Ice Off If you don’t want to make more ice, press the Ice Off button. Pressing this button 3 second locks the display panel and dispenser buttons so the buttons can not be used.The Child Lock icon lights up to indicate you’ve activated the Child Lock function. Press the Cubed Ice or Crushed Ice button to select the type of ice you want dispensed. Each time you press the button, the cubed and crushed ice modes alternate and the Cubed or Crushed ice icon lights up, indicating your selection. If you don’t need ice, turn the function off to save on water and energy consumption (See Ice Off below). Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the c...

Download now

Please, enter two numbers from picture: