Votes - 4, Average rating: 3.5
(
)
)
|
manual abstract
• The doors and door handles should be cleaned with a mild detergent and cloth. Dry them with a clean cloth. • The exterior should be polished once or twice a year. Rear • Use a vacuum cleaner to remove dust once or twice a year. Ice and water dispenser and drainage grid (optional) • Use a damp cloth to clean the ice and water dispenser. Then wipe it with a dry cloth. • Keep the ice and water dispenser and drainage grid dry. Beverage station (optional) • Use a damp cloth to clean the extra refrigerating compartment. Then wipe it with a dry cloth. Rubber door seals • If the rubber door seals are dirty, the door will not close properly and the refrigerator and freezer will be unable to function efficiently. Clean them with a mild detergent and damp cloth. Then wipe them with a dry cloth. • When cleaning the appliance or if you are not going to use it for a long time, remove the power plug, leave the doors open and keep the appliance dry. NOTE • Do not clean it by spraying it directly with water. • Do not clean it with benzene, thinner or car detergent. OPERATING INSTRUCTIONS 15 CLEANING THE ACCESSORIES CHANGING THE INTERIOR LIGHT Deodorizer (optional) • Remove the cover with a flat blade screw driver as shown. • Take out the cartridge from the cover and soak it in clean, warm water for at least 4 hrs. Completely dry out the cartridge with sunlight for at least 8 hrs in an open area. • Repeat this process once or twice a year. • If it is dried in a confined area, odor may be spread to that area. • Keep the children away from yellow water, they may drink water.NOTE With CoolSelect zoneTM Model Without CoolSelect zoneTM Model Before changing the interior light, unplug the appliance from the power supply. If you experience difficulty when changing the light, contact your service centre. WARNING INTERIOR LIGHT IN THE FREEZER (BASIC MODEL ONLY) / REFRIGERATOR Place a flat screwdriver under Pull the cover in the direction of After changing the bulb, the light cover hooks and the arrow. replace the light cover. push in the direction of the arrow. INTERIOR LIGHT IN THE FREEZER (MODEL WITH ICE AND WATER DISPENSER) . Lift and pull out the ice maker cover (.). Use a screwdriver to remove the light cover (.). Replace the bulb with a new one (.), and then secure the light cover back into place using a screwdriver. Replace the ice maker cover. . 16 WATER FILTER The water “Filter Indicator” light • “Filter Indicator” light lets you know when it is time change your water filter cartridge. The light will change from green to orange. This tells you that it is almost time to change the current cartridge. It is recommended that you replace the cartridge when the light changes to red. (see “Install the water filter” section for more information) Using the dispenser without the water filter • You can not use the water and ice dispenser without a water filter cartridge because of the water line block at the water supply. Ordering replacement filters • To order more water ...
Other models in this manual:Refrigerators - 21KCMS (2.08 mb)
Refrigerators - 21KCSW (2.08 mb)
Refrigerators - 21KLDW (2.08 mb)
Refrigerators - 21KLLB (2.08 mb)