Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
The guarantee does not cover such uses. Some chemical ingredients and additives in such drinks / beverages may also attack and damage water tank material. • Only use clean pure drinking water. • Capacity of water dispenser tank is 2.2 litres [3.8 pints], do not overfill. • Push the water dispenser lever with a rigid cup. If you are using a plastic disposable cup, then push the lever with your fingers from behind the cup. • Safety Lock is supplied for your convenience when filling the water tank and also to avoid small children tampering with the water dispenser. [See Page 8] 7 Cleaning the water tank Remove the water tank, open the latches on both sides and detach the top cover mechanism from the water tank. Clean the water tank with warm clean water, reinstall the top cover mechanism and fasten the latches. When installing the water tank, make sure that hooks behind it fits securely into the hangers on the door. Make sure that parts removed during cleaning (if any) are installed correctly into their original locations. Otherwise, water may leak. Important: Water tank and components of water dispenser are not dishwasher-proof. Water tray Water that drips while using the water dispenser accumulates in the drip tray. Remove the drip tray by pulling it towards yourself and empty it from time to time. Remove the plastic drainer part as shown in the diagram by pressing down on the edge. Remove the water valve from the water tank as shown in the diagram. When re-fitting, make sure the O-shaped seal is in place. Safety lock for Water Dispenser You may use the lock in order to avoid small children tampering with the water dispenser. To do this, slide the locking latch from left to right as illustrated in the figure. You must slide the latch back to left position in order to use the water dispenser. To avoid accidental water dispensing, we recommend you to lock the water dispenser. 8 UNLOCK LOCK REVERSING THE DOORS (You may need somebody to help you.) 1-Switch off the appliance at the socket outlet and pull out the mains plug. 2-Remove all loose items and fittings and food, if any, from inside the appliance and door racks. Make sure you also remove the water dispenser tank and related parts. 3-Unscrew the bolts and remove the middle hinge while holding doors. (1) 4-Remove the fridge door from the top hinge. (2) 5-Remove the freezer door. (3) 6-Remove the plastic covers on the front top trim. (4) 7-Unscrew the bolts of the top hinge and remove top hinge. (5) 8-Reposition plugs on the opposite side. (6) 9-Remove the kick plate. (7) 10-Carefully tilt the appliance on its back. (8) (You may need somebody to help you.) 11-Unscrew and remove the left hand side front feet. (9) 12-Unscrew and remove the bottom hinge. (10) 13-Remove the plastic cover and fit the tap which is in the plastic bag to the other side. (11) 14-Unscrew and remove the middle hinge bushing from fridge door. (12) 15-Screw and fix the new middle hinge bushing which is supplied in plastic bag to the other side. (13) 16-Reposition the hinge bushing and the tap on the freezer door. (14) 17-Unscrew and reposition the bottom hinge bushing. (15) 18-Unscrew bolt of the pin on the bottom hinge. Fit the pin to the other hole on the hinge and tighten the bolt on the new position. (16) 19-Fit the bottom hinge and other feet, and tighten the screws. (17) 20-Remove the plastic tap to the opposite side on the front bottom trim. (18) 21-Fit the front bottom trim to the bottom hinge and other feet. (19) 22-Rotate the top hinge 180°. Unscrew the hinge pin and re-tighten it to the opposite side. (20) 23-Fit the top hinge and tighten the bolts. (21) 24-Fit the plastic cover on the front top trim. (22) 25-Locate the freezer door to the bottom hinge and attach to the cabinet. (23) 26-Locate the middle hinge on the freezer door (24) and put the freezer door between the top and middle hinge carefully. (25) 27-Fit the middle hinge. Adjust the doors and tighten the bolts. (26) 28-Carefully stand your appliance (you may need somebody to help you) adjust the front feet. 29-Put back all, loose items and fittings. 30-Wait for at least 4 hours to allow the system to settle before switching on. 31-Once the correct storage temperatures have been reached in the appliance, put back all the food. 12 13 11 11 14 15 25 24 1 6 3 17 18 7 9 10 23 22 22 2 4 5 4 26 45 ° 8 21 19 16 180° 20 19 9 10 SUGGESTED ARRANGEMENT OF FOOD IN THE FRIDGE/FREEZER Arrangement Examples (See diagram) 8 1. Baked, chilled cooked food, 9 1 dairy products, cans. 10 2. Bottle storage2 11 2. Meat, sausages, cold cuts. 1 12 3. Fruit, vegetables, salads. 13 4. Making, storing ice cubes.3 5. Frozen food. 6. Frozen food and4 14 freezing of fresh food. 5 7. Butter, cheese. 8. Small bottles, cans, tubes. 9. Eggs.7 10. Small items 11. Potable still water 6 12. Tall bottles, cans, tubes, beverages. 13. Small bottles, cans, tubes, beverages. The following guidelines and recommendations are suggested to obtain the best results a...