Votes - 2, Average rating: 5
(
)
)
|
manual abstract
Mark the outside of your package “ ATTENTION CUSTOMER SERVICE” . We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. ------------------- ------------------ ------------------ --------------- ------------- REGISTRATION CARDPlease fill out and mail the product registration card within ten (10) days of purchase. The registration will enable us to contact you in the unlikely eventof a product safety notification. By returning this card you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions. Return to: EURO- PRO Operating LLC, 94 Main Mill Street, Door16, Plattsburgh, N. Y. , 12901____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ Appliance model____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ Date purchased Name of store____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ Owner's name____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ __ ____ ___ ___ Address City State Zip CodeModel WC213H IMPORTANT SAFETY INSTRUCTIONS SAVE THESE 1 For Household Rev. 07/05 12. Do notuse adapter with an extension cord. Plug adapter plug directly into an electrical outlet. Use adapter only in a standard (120V., 60Hz) electrical outlet. 13. Unplug from outlet when not in use. 14. Keep adapter away from heated surfaces. 15. Do nothandle plug or appliance with wet hands. 16. Never add water to the wine chiller. 17. Do notuse this appliance outdoors. 18. Do notuse this appliance for other than intended use. 19. Always use the appliance on a dry, level surface. 20. When operating the wine chiller, keep at least 2 inches of free space on all sides of the wine chiler to allow for adequate air circulation. 21. Do notput any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air flow. 22. Do notoperate the unit dry. 23. Do notplace your hands in the wine chiller while the appliance is operating. 24. Do notattempt to use the adapter with any other. Use only adapter supplied with this appliance. When using your Wine Bottle Chillerbasic safety precautions should always be observed, including the following: 1. Read all instructions before using your Wine Bottle Chiller. 2. To protect against fire, electric shock and injury to persons, do not immerse cord, plugs, or Wine Chiller in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. This appliance is not for use by children. 4. Do notlet cord hang over edge of table or counter, or touch hot surfaces. 5. To avoid electric shock, do notopen the housing. There are no serviceable parts 6. Do notoperate any appliance with a damaged cord or plug or after the appliance malfunctions or has been dropped or damaged in any manner. Return appliance to EURO-PRO Operating LLCfor examination, repair or adjustment. 7. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. 8. Do notplace in a refrigerator. 9. Do notplace on or near a hot gas or electric burner or in a heated oven. 10. Insert the power cord into the electrical wall outlet first and then insert the jack into the unit. 11. To disconnect, first remove the jack from the unit and then remove the plug from the electrical wal outlet. Always hold the plug, and never pull the cord. Do notabuse the adapter cord. Never carry the adapter by the cord or yank to disconnect from an electrical outlet. Getting To Know Your Wine Bottle Chiller Technical Specifications Voltage: 120V., 60Hz. Power: 1.2 Amps 2 1. Main Unit 2. Bottle Compartment 3. Power “On” Light 4. Air Intake 5. Air Vent 6. AC Power Inlet Socket 7. AC Jack 8. Adapter 9. Plug OPERATING INSTRUCTIONS Using your wine bottle chiller 1. Remove all packaging materials from unit. 2. Wipe clean with a damp cloth. 3. Insert the plug into an electrical wal outlet. 4. Insert the AC jack into the power inlet at the back of the unit. Make sure that the jack is inserted with the channel side down. 5. The power “On” light (blue) wil light up. 6. Place the unit on a flat surface. Do not place the unit on any cloth, paper or plastic bag that might block the air intake on the bottom of the unit. 7. Insert the bottle of wine into the bottle compartment. 8. When wine has cooled, remove from the unit. 9. Remove the jack from the unit first and then the plug from the electrical outlet. Cleaning and Maintenance Before cleaning the wine bottle chiller, ensure that the adapteris unplugged from both the appliance and the electrical outlet. To clean, simply wipe the inside and the outside with a clean, damp cloth. Once clean, dry thoroughly. NOTE: Do not use outdoors. Household use only. NOTE: * Illustrations may vary from act...