Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Never use strong and abrasive cleaning agents. Cleaning the appliance surface Suitable cleaning agents and care products for your appliance can be purchased via the Hotline or from the Online Shop (see the start of the instructions for use). Note: The appliance surface and controls are scratch-sensitive. Observe the warranty regulations in the enclosed service booklet and the following cleaning instructions: ¦ Clean the surfaces with a soft, damp cloth, washing-up liquid or a mild window cleaner. Soften dried dirt with a damp cloth. Do not scratch. ¦ Dry cloths, abrasive sponges, scouring agents, cleaning agents containing sand, soda, acid, chlorine or any other aggressive substances are not suitable. ¦ Clean stainless steel surfaces in the direction of the grain only. ¦ Do not use stainless steel cleaner or wet cloths for the controls. Cleaning the metal mesh grease filters The inserted metal mesh grease filters absorb the grease particles from the kitchen fumes. Clean the metal mesh grease filters under normal use (1 to 2 hours daily) approx. every three months. Notes ¦ Do not use any aggressive, acidic or alkaline cleaning agents. ¦ When cleaning the metal mesh grease filters, also clean the holder for the metal mesh grease filters in the appliance using a damp cloth. ¦ The metal mesh grease filters can be cleaned in the dishwasher or by hand. In the dishwasher: Note: If the metal mesh grease filters are cleaned in the dishwasher, slight discolouration may occur. This has no effect on the function of the metal mesh grease filters. ¦ Do not clean heavily soiled metal mesh grease filters together with utensils. ¦ Place the metal mesh grease filters loosely in the dishwasher. The metal mesh grease filters must not be wedged in. By hand: Note: You can use a special grease solvent for stubborn dirt. It can be ordered via the Online Shop. ¦ Soak the metal mesh grease filters in a hot soapy solution. ¦ Clean the filters with a brush and then rinse them thoroughly. ¦ Leave the metal mesh grease filters to drain. Replacing bulbs : Risk of burns, risk of electric shock! from defective bulbs. Switch off the fuse or pull out the mains plug. Always replace defective bulbs immediately (leave bulbs to cool down first) to prevent the remaining bulbs from overloading. Important Only use a bulb of the same type and same power (see the bulb holder or rating plate inside the appliance) – to do this, remove the metal mesh grease filter. Replacing halogen bulbs Note: When inserting halogen bulbs, do not touch the glass tube. Use a clean cloth to insert the halogen bulbs. 1. Carefully remove the bulb ring using a suitable tool. 2. Pull out the bulb and replace it with a bulb of the same type. 3. Insert the bulb cover. 4. Insert the mains plug or switch on the fuse again. LED lights Defective LED lights may be replaced by the manufacturer, their customer service or a qualified technician (electrician) only. : Risk of injury! from the glare of an LED in risk group 1. ...
Other models in this manual:Range Hoods - LC68KB540B/02 (934.76 kb)
Range Hoods - LC98KA540/03 (934.76 kb)
Range Hoods - LC98KB540/01 (934.76 kb)
Range Hoods - LC98KB540/02 (934.76 kb)