Votes - 0, Average rating: 0
(
)
)
|
manual abstract
By hand: Note: You can use a special grease solvent for stubborn dirt. It can be ordered via the Online Shop. ¦ Soak the metal mesh grease filters in a hot soapy solution. ¦ Clean the filters with a brush and then rinse them thoroughly. ¦ Leave the metal mesh grease filters to drain. Removing metal mesh grease filter 1. Open the lock and fold down the metal grease filter. While doing this, place the other hand under the metal grease filter. 2. Take the metal grease filter out of the holder. For edge extraction filters, pull the metal grease filter downwards. While doing this, place the other hand under the metal grease filter. For additional filters, open the lock and fold down the metal grease filter. While doing this, place the other hand under the metal grease filter. Notes ¦ Grease can accumulate in the bottom of the metal grease filter. ¦ Hold the metal grease filter level, otherwise grease will drip out. 3. Clean the metal grease filter. Installing the metal mesh grease filter 1. Insert the metal mesh grease filter. While doing this, place the other hand under the metal mesh grease filter. 2. Fold the metal mesh grease filter upwards, locking it in place. Area Cleaning agents Stainless steel Hot soapy water: Clean with a dish cloth and dry with a soft cloth. Clean stainless steel surfaces in the direction of the grain only. Special stainless steel cleaning products are available from our after-sales service or from specialist retailers. Apply a very thin layer of the cleaning product with a soft cloth. Painted surfaces Hot soapy water: Clean using a damp dish cloth and dry with a soft cloth/towel. Do not use any stainless steel cleaners. Aluminium and plastic Glass cleaner: Clean with a soft cloth. Glass Glass cleaner: Clean with a soft cloth. Do not use a glass scraper. Operating controls Hot soapy water: Clean using a damp dish cloth and dry with a soft cloth. Risk of damage to the electronics from penetrating moisture. Never clean operator controls with a wet cloth. Do not use any stainless steel cleaners. Trouble shooting Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service. : Risk of electric shock! Incorrect repairs are dangerous. Repairs may only be carried out and damaged power cables replaced by one of our trained after-sales technicians. If the appliance is defective, unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service. Malfunction table Problem Possible cause Solution The appliance does not work The plug is not plugged in. Connect the appliance to the electricity supply Power cut Check whether other kitchen appliances are working Faulty fuse Check in the fuse box to make sure that the fuse for the appliance is OK The lighting does not work. The bulbs are faulty. For information on changing the bulbs, see the "Replacing Bulbs" section. Replacing bulbs : Risk of electric shock! When changing the bulbs, the bulb socket contacts are live. Before changing the bulb, unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Important Only use a bulb of the same type and same power (see the bulb holder or rating plate inside the appliance) – to do this, remove the metal mesh grease filter. Replacing halogen bulbs Note: When inserting halogen bulbs, do not touch the glass tube. Use a clean cloth to insert the halogen bulbs. 1. Carefully remove the bulb ring using a suitable tool. 2. Pull out the bulb and replace it with a bulb of the same type. 3. Insert the bulb cover. 4. Insert the mains plug or switch on the fuse again. LED lights Defective LED lights may be replaced by the manufacturer, their customer service or a qualified technician (electrician) only. : Risk of injury! The light emitted by LED lights is very dazzling, and can damage the eyes (risk group 1). Do not look directly into the switched on LED lights for longer than 100 seconds. 8 After-sales service Our after-sales service is there for you if your appliance needs to be repaired. We will always find the right solution in order to avoid unnecessary visits from a service technician. When calling us, please give the product number (E no.) and the production number (FD no.) so that we can provide you with the correct advi...
Other models in this manual:Range Hoods - D79SR22N0B/01 (922.87 kb)
Range Hoods - D86ER22N0B/01 (922.87 kb)
Range Hoods - D86GR22N0B/01 (922.87 kb)
Range Hoods - D87ER22N0B/01 (922.87 kb)