Votes - 0, Average rating: 0
(
)
)
|
manual abstract
When a button is pressed, this is verified by an acoustic signal. Switching off the acoustic signal: . Simultaneously press buttons 0 and + until a signal is emitted after approx. 3 seconds. Switching on the acoustic signal: . Repeat the process. Switching the fan ON . Press the + button. Setting the required fan speed: . Press the + button. The fan speed is increased by one step. . Press the – button. The fan speed is reduced by one step. Switching the fan OFF: . Press the 0 button. The displayed { goes out shortly afterwards. Or: . Keep pressing the – button until the fan switches off. The displayed { goes out shortly afterwards. 10 Operating procedure Intensive setting: Maximum power is obtained at the intensive setting. It is only required for short intervals. . Keep pressing the + button until a c appears in the display. . If the intensive setting is not cancelled by hand, the fan will automatically switch back to step } after 10 minutes. Fan follow-on: . Press the button. The fan continues to run at step | for 10 minutes, and at the same time a dot flashes in the display. After this period the fan switches off automatically. Lighting: . Briefly press the a button to switch the light on and off. . The light can be switched on at any time, even though the fan is switched off. . Adjusting the brightness: Hold down the a button until the desired brightness is obtained. Switching on the light automatically, e.g. via a timer: . Fan and light must be switched off. Switching on: Simultaneously press the – and ! buttons. . After approx. 3 seconds the light switches on to acknowledge the setting. Switching off: Repeat the process with the light switched on. . After approx. 3 seconds the light switches off to acknowledge the setting. Grease filter: two metal grease filters are inserted to soak up the fatty remains of the kitchen steam. The filters are made of non-inflammable metal. Caution: As the filter becomes more and more saturated with grease, not only does the risk of it catching fire increase but the efficiency of the extractor hood can also be adversely affected. Important: Danger of fire, which can occur through the accumulation of heat when deep frying or roasting, can be prevented by timely cleaning. Saturation indicator: When the grease filters reach saturation point, an acoustic signal is sounded for 10 seconds after the fan has switched off, and an # appears in the display. The grease filters should be cleaned straight away. Cleaning the grease filter: . The filters can be cleaned in a dishwasher. It is however possible that they will become slightly discoloured. . Insert the outer filter so that the hookingin holes are at the bottom and the rinsing water can run off. Important: Do not clean very soiled grease filters together with dishes. . When cleaning the filters by hand, soak them in hot soapy water first of all. Then brush the filters clean, rinse them thoroughly and leave the water to drain off. Cancel the # in the display. . Pres...
Other models in this manual:Range Hoods - DKE995F/02 (5.26 mb)
Range Hoods - DKE995FAU/01 (5.26 mb)
Range Hoods - DKE995FAU/02 (5.26 mb)
Range Hoods - DKE995FGB/01 (5.26 mb)