Votes - 6, Average rating: 4.2
(
)
)
|
manual abstract
Please see page 5 and 6 for instructions. Index Important Safeguards ....................... 2 Operating Instructions ....................... 3 Cleaning and Maintenance ............... 4 Troubleshooting................................. 5 Corona Wire ...................................... 6 Warranty ............................................ 6 Customer Order Form ....................... 7 IMPORTANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS AIR CLEANER. WARNING To reduce the risk of fire, electric shock, or injury: • High voltage. Turn off the power switch and unplug before servicing. This equipment should be inspected frequently and collected dirt removed from it regularly to prevent excessive accumulation that may result in flashover and/or risk of fire. • Do not use outdoors or on wet surfaces. • Do not allow to be used as a toy. Close attention is necessary when used by or near children. • Use only as described in this manual. Use only manufacturer’s recommended replacement parts. • Do not use with damaged cord or plug. If air cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using. • Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces. • Do not use extension cords or outlets with inadequate current carrying capacity. • Turn off all controls before unplugging. • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. • Do not handle plug or air cleaner with wet hands. • Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow. • Do not use without filters in place. • Store your cleaner indoors in a cool, dry area. • Do not use in humid places such as bathrooms. If liquid enters the air cleaner, turn it off and have it inspected by an authorized Electrolux service station. • Do not use near flammable gases. • Do not locate under a smoke alarm. • Do not put objects on top of or inside the unit. • Do not block the grills. SAVE THESE INSTRUCTIONS GENERAL INFORMATION To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. BEFORE YOU PLUG IN YOUR AIR CLEANER, check the voltage rating plate located on the back of the unit to check if it agrees within 10% of the voltage available. (See Rating Plate). DO NOT OIL the motor at any time. The bearings are permanently lubricated and sealed. GENERAL INFORMATION (continued) Rating Plate The model, type, and serial number are MODEL TYPE SERIAL NO. indicated on the rating plate located on the VOLTS AMPS. HERTZ back of the cleaner. For prompt and complete SERVICE INFORMATION: USA1-800-282-2886 Canada 1-800-282-2886 service information, always refer to these numbers when inquiring about service. Model & Type______________________Serial No._________________________ OPERATING INSTRUCTIONS 12345 7 811 6 9 10 1. Air outlet grills 7. Pre-filter Door 2. Reset button for filter replacement 8. Carrying Handle 3. Audio Sensor 9. Power Cord 4. Display 10. Compartment for unused cord 5. Fan Speed Control 11. Top cover release button (On both 6. Air inlet grills sides of air cleaner.) CONTROLS Automatic Mode A This position adjusts the fan speed to the noise level in the room.This automatic B mode senses room noise to increase or decrease fan speed. This mode is a good choice when A entertaining. Automatic Mode B This position adjusts the fan speed to the degree of air contamination in the room. Manual Mode C This position provides a manual setting for the fan speed. O is off, 3 is highest speed. C USAGE All models are designed to run continuously with the fan speed set to (1).When required, they can be run at higher speeds (2) and (3). The best results are achieved by leaving the air cleaner on around the clock. (it uses less power than most light bulbs). DISPLAY A B C D E F G F A Room noise level indicator (when in audio position). B High level of contamination. Set to (3) or auto. C Medium level of contamination. Set to (2) or auto. D Lower level of contamination. Set to (1) or leave at this setting. E Indicates time to clean filters according to schedule. F Indicates filter must be changed. G Fan speed indicator. FILTRATION STAGES To ensure the highest quality of air, the air cleaner has a specially designed triple stage filtration system. When air enters the unit, it passes through three filters and is then let out into the room again. Stage 1 Two pre-filters remove l...