Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
Check for loose, missing or damaged parts. Safety Guidelines This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols. Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. Notice indicates important information, that if not followed, may cause damage to equipment. General SafetyInformation CALIFORNIA PROPOSITION 65 You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. protective gear. Air Cleaner / Dryer This product or its power cord contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. MANUAL This product is a part of a high pressure system and the following safety precautions must be followed at all times along with any other existing safety rules. 1. Read this instruction manual before installing this device on a compressed air system. Be thoroughly familiar with the controls and the proper use of the equipment. 2. Safety glasses must be worn during operation. Always work in a well ventilated area. 3. Do not exceed any pressure rating of any component in the system. 4. Protect air lines from damage and puncture. 5. Check air hoses for weak or worn condition before each use. Make sure all connections are secure. 6. Keep all nuts, bolts and screws tight and ensure equipment is in safe working condition. This product is specifically designed for compressed air service ONLY. Use with any other fluid (liquid or gas) is a misapplication and not permitted. For example, use with or injection of certain hazardous liquids or gases in the system (such as alcohol or liquid petroleum gas) could be harmful to the unit or result in a combustable condition or hazardous external leakage. Campbell Hausfeld’s warranties are void in the event of misapplication and assumes no responsibility for any resulting loss. Specifications Maximum pressure: 150 PSIG (10 bar). Maximum temperature: 125.F (52.C). Installation Disconnect power and release all pressure from the system before attempting to install, service, relocate or perform any maintenance. Figure 1 Service Indicator Mounting Bracket Coalescing Filter Dryer 1. The air cleaner/dryer should be located as close as possible to the air tool or spray gun. 2. A shutoff valve should be installed before the air cleaner/dryer so the unit can be easily depressurized for servicing. Securely mount the air cleaner/dryer in a vertical position using the mounting bracket supplied with the unit. 3. Install a Campbell Hausfeld 3/8" Filter (PA212103) before and after the coalescing filter/dryer for optimum performance. Connect the piping or hose with airflow in the direction of the arrows cast into the top of the unit. Avoid using unnecessary fittings, couplings, etc., that restrict air flow. 4. Remove the bowl from the dryer housing by loosening the lock ring. Pull bowl down to remove from housing. 5. Open bag of desiccant and pour into bowl. Shake or tap bowl periodically to settle desiccant. Fill to within 1/2" from top of bowl. Do not allow desiccant to get into center tube. 6. Reinstall bowl on housing. Be sure the lock ring is tightened before pressurizing the unit. REMINDER: Keep your dated © 2007 Campbell Hausfeld/For parts, product & service information IN245503AV 3/07 visit Air Cleaner / Dryer Installation (Continued) 7. The coalescing filter is supplied with the filter element preinstalled. 8. Be sure to use a clean air hose to prevent contamination of the cleaned air. 9. Pressurize system and check for any air leaks. Operation Before turning on the air pressure supply, make certain the bowls are securely locked in place and all fittings are tight. Maintenance Always depressurize the unit before removing any bowl or personal injury and/or property damage could occur. 1. Drain moisture from coalescing filter before every use. To drain, turn drain valve so that the arrow points downward. Make sure system pressure is 10 psig or less. 2. The only other servicing required for the air cleaner/dryer is replacement of the desiccant when the desiccant turns pink, and replacement of the filter element when the service indicator pops up. 3. Desiccant Replacement a. Shut off air flow to the air cleaner/dryer and depressurize system. b. Remove bowl from the dryer housing by loosening the lock ring. Pull bowl down to remove from housing. c. Pour out used desiccant. d. Pou...