Votes - 0, Average rating: 0 ( )

Manafacture: Bosch File size: 6.99 mb File name: Language of manual:

. Make sure that the drainage plug is fully inserted. It may have come loose during transportation, Fig. 1. Fig. 1 . The manufacturer informs that these appliances are exclusively intended for household and/or commercial use, commercial being understood as offices or rooms, the size and characteristics of which comply with those specified in the commercial catalogues. . The use of this appliance is not guaranteed for industrial environments, industrial being understood as large areas or in the proximity of non-ambient heat sources (elements, heaters, etc.). If there are children in the home . The front flap and the air-conditioning appliance must not be sat upon, climbed on or leant against. The appliance may fall over, hurting persons and/or damaging objects. . Do not allow children to play or tamper with the air-conditioning appliance. . Keep small children away from the air- conditioning appliance, particularly when the front flap is open, to prevent them from hanging from or leaning against it. It may fall over. . Do not allow children to play with or insert objects in the air outlets or any other cavity on the appliance. 27 2727 28 Your new appliance Description of the appliance Diffusion duct Basic filter Hot air outlet Air intake Air intake Cold air outlet Cold air outlet Front flap Hot-air expulsion tube Cable housing Removable tank Characteristics plate Side fins Handles Air conditioning unit Wheels Double active filter Condensed water drainage pipe plug Air expulsion tube parking hook Water drainage pipe Flow director Fig. 2 Your new appliance Control panel UP key + – Down key ON/OFF Timer key Side air output key Auto key Digital display screen for temperature, time, speed, mode, etc. Fig. 3 Function menu • Cooling • Dehumidification • Air purification Desired temperature display Additional function display: • Fault warning • Side grilles • Change filter indication • Water tank full Manual / auto mode display Stop time menu Current time display Manual speed Auto speed Timer menu Start time menu Fig. 4 29 Your new appliance Description of accessories Suction pad Base filter Double active filter Art. Nr.: PAZ10000 Wall grommet Art. Nr.: PAZ11001 Sliding balcony accessory Art. Nr.: 448069 PAM0720 / • • * Approx. max. (length x width) cm. o wall 14 70 x 10 205 x 10 Standard accessories: These accessories are supplied with the appliance. •Optional accessories: These accessories are available for purchase from the manufacturer's official technical service and authorised distributors. * * Optional accessories: These accessories are only available for purchase from the manufacturer's official technical service. Requirements for use Requirements for use . This home appliance should be connected to a 220/240 V, 50 Hz mains electricity supply via an earthed socket. . It must be protected with a 10 A slow-action fuse. . Should an extension lead be required, then this lead should be at least 1.5 mm2 thick per terminal, less than 25 m long and earthed. . There is a cavity at the back of the appliance to house the mains electricity supply cable. See Fig. 2. . Do not allow water to enter your appliance and do not cover the air intakes/outlets. . For safety reasons, the appliance must be at least 20 cm away from any nearby surface before it is turned on, Fig. 5. min. 20 cm. min. 20 cm. Fig. 5 Warning! The mains electricity supply connection cable must only be replaced by authorised members of the manufacturer ’s Official Technical Service. When the appliance is turned off and then turned back on, it takes the compressor 3 minutes to start up again. This period of time is required in order to ensure correct operation. Avoid direct contact with the air expelled through the expulsion tube. 30 Navigation The control panel is designed to make it easier to use your appliance. The following points need to be taken into consideration. The "up" and "down" keys are used to move up and down the screen. The "+" and "–" keys (right and left) are used to move to the right and to the left in the selection box. The box shows the function selected for modification. The following is an example of navigation: Up and down keys The "up" and "down" keys are used to move up and down the screen. "Down" key : Starting from the screen shown in the first figure (the selection box is situated on the operation function option). If you press key , the selection box moves down to the "Temperature selection" function. If you press key again, the selection box moves down to the “speed selection” function. "Up" key : Key works in exactly the same way as key , the selection box moving up rather than d o w n . Cyclical operation: Both keys work cyclically, i.e. if the selection box is at the bottom of the screen and key is pressed again, the selection box moves to the top of the screen. Likewise, if the selection box is at the top of the screen and key is pressed, the selection box moves to the bottom of the screen. "+" and "–" keys The "+" and "–" ...

Download now

Please, enter two numbers from picture: