Votes - 3, Average rating: 3.7 ( )

Manafacture: Philips File size: 1.08 mb File name: ac4052_00_dfu_ron.pdf Language of manual:

7). guarantee and service If you need information or if you have a problem, please visit the Philips website at or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer. Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 21). troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country. ProblemSolution The selected function/ time mode doesn’t work. The appliance may be in standby mode or may be switched off. The appliance doesn’t work. There may be a connection problem. Check if the plug is inserted in the wall socket properly. The appliance may not be switched on. AC4064/AC4054: press the function selection button. AC4062/AC4052: press the on/off button. The ESP particle filter or the front panel may not be placed properly. Reinsert the filters and reattach the front panel. The zeolite gas filter is not placed yet. Insert the filter and reattach the front panel. If you have performed the above checks and the appliance still does not work, it may be malfunctioning. Unplug the appliance and take it to your Philips dealer or an authorised Philips service centre. The clean air doesn’t come smoothly out of the air outlet The pre-filter may be clogged. Clean the pre-filter (see chapter ‘Cleaning and maintenance’). Perhaps you forgot to remove the plastic wrapper of a new filter. Remove the plastic wrapper before you switch on the appliance again. The air inlet or outlet may be blocked by external objects. Remove the object that blocks the air inlet or outlet. 1 English ProblemSolution Clean the filters and the corona particle charger (see chapter ‘Cleaning and maintenance’). If this does not help, unplug the appliance and take it to your Philips dealer or an authorised Philips service centre. The odours are not removed properly. The zeolite gas filter may be dirty or may have reached the end of its life. Clean the zeolite gas filter (see chapter ‘Cleaning and maintenance’) or replace it (see chapter ‘Filter replacement’). Perhaps you use the appliance in a room in which the ambient air quality is very poor. In that case, open windows to improve the air circulation. Perhaps you use the appliance in a room that is much bigger than the room size the appliance is intended for. Put the appliance in a smaller room.The recommended room size is 6m. up to 20m. for AC4054/ AC4052 and 6m. up to 40m. for AC4064/AC4062. The dust particles are not removed properly. The ESP particle filter may have reached the end of its life. Check the colour of the ESP particle filter (see chapter ‘Filter Replacement’). If necessary, replace the filter. Perhaps you use the appliance in a room that is much bigger than the room size the appliance is intended for. Put the appliance in a smaller room.The recommended room size is 6m. up to 20m. for AC4054/ AC4052 and 6m. up to 40m. for AC4064/AC4062. The fans do not work, even though the appl...

Download now

Please, enter two numbers from picture: