Login:
Votes - 2, Average rating: 3.5 ( )

User manual Blueair, model HEPASILENT 501

Manafacture: Blueair
File size: 521.42 kb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


But as the patented Blueair system removes dust, pollen, smoke, gases and odors from your indoor environment, we think you’ll notice the difference. GENERAL SAFETY INSTRUCTIONS The Blueair 501/Blueair 601 is an electrical appliance. Before using it for the first time, please read these safety instructions and take precautions to reduce the risk of fire, electric shock and injury. (And keep in mind the Limited Warranty applies only if the unit is used according to instructions.) To reduce the risk of electric shock, the Blueair 501/Blueair 601 has a grounding type plug (with a third pin) that will only fit a grounding type outlet. If the plug does not fit your outlet, contact a licensed electrician to install a grounded outlet. Do not alter the plug in any way. To avoid electric shock and fire hazards, plug the Blueair 501/Blueair 601 directly into an appropriate electrical outlet (see voltage label on your unit) using the cable provided. The cable is packaged beneath the unit. Blueair501/Blueair601 Do not allow foreign objects to enter the ventilation or exhaust openings. This may cause electric shock or damage to the unit. Never try to repair or adjust any of the electrical or mechanical functions on your Blueair 501/Blueair 601 yourself. Contact your local dealer or Blueair for service center information. Use only authorized Blueair filters. USING YOUR BLUEAIR Place the unit in a location that allows air to circulate freely in, out and around the unit. Do not place the unit: • Directly on or against soft furnishings (such as bedding or curtains). • Near electronically sensitive devices such as a computer (within 6./10cm). • Near sources of heat (such as radiators, fireplaces or ovens). • Near oxygen tanks or other combustible gases. Do not let the Blueair come in contact with water. It is not designed for use outdoors or in wet areas (such as bathrooms). SETTINGS When turning on the Blueair after the unit has been off, turn the speed control to max speed for a few minutes of fast initial cleaning. Then adjust the control to the desired speed: • Minimum speed HEPASilent™ (for nighttime use) • Moderate speed (for daytime use) • Maximum speed (for fast initial cleaning or very polluted air) For best results, run your Blueair 501/Blueair 601 24 hours a day, 7 days a week. Continuous operation means you get a continuous supply of clean, filtered air circulating throughout the room. Blueair501/Blueair601 How It Works Airflow output Blue “power on” light Easy-to-change filters – no tools required Galvanized Swedish steel housing Ion brushes (no ozone generated) Airflow intake Speed control knob Power source and cord Blueair501/Blueair601 KEEP YOUR BLUEAIR LOOKING GOOD AND WORKING WELL The Blueair 501/Blueair 601 features award-winning Swedish design, materials and workmanship. Keep your unit in top condition with these cleaning tips: • When changing filters, vacuum the inside grill when there are no filters in the unit. • Wipe the exterior with a soft, clean, damp cloth. • Vacuum the small inlets with a soft brush attachment. • Never clean with gasoline, chemical solvents or corrosive materials – they may damage the surface. HELP KEEP THE PLANET HEALTHY, TOO At Blueair, we’re in the business of clean air. Our air purifiers are designed for maximum improvement of indoor air, with minimum impact on the natural world. The Blueair particle filter is made of polypropylene, which breaks down into water and carbondioxide when burned. Blueair filters contain no triclosan or other chemical additives. All major parts are made from high-quality galvanized steel. The external parts have been powder coated for endurance and environmental protection (with no introduction of chemical outgassing). The Blueair 501/Blueair 601 is energy efficient. Blueair air purifiers are built for years of use. They are also designed to be disassembled and the components sorted and recycled. Blueair501/Blueair601 FILTERS Changing the Filters Patented HEPASilent™ technology makes the Blueair 501/Blueair 601 incredibly quiet. Units come with one HEPASilent™ filter kits (installed): Particle Filter Kit – Includes 3 particle filters that remove dust, pollen, bacteria, pet dander, mold spores and other airborne particles. The particle filter is made of polypropylene, which mechanically filters out airborne particles. To maximize filter effectiveness, particles are negatively charged before reaching the filters. Smokestop™ Filter Kit – Includes 3 particle filters with enhanced active carbon. This filter kit is recommended for use in rooms where gaseous pollutants such as cigarette and cigar smoke or other VOCs (volatile organic compounds, such as most household paints) are present. On first use, you may notice a slight odor from the enhanced active carbon; this will dissipate quickly. For optimal performance Blueair recommends that you replace filters every six months. We offer a convenient Filter Subscription Program (not available in all countries)...

Other models in this manual:
Air Cleaners - HEPASILENT 601 (521.42 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category