Votes - 4, Average rating: 3.8 ( )

Manafacture: Honeywell File size: 489.69 kb File name: Language of manual:

4. Replace filter(s) as needed, and discard used filters. 5. Wrap the activated carbon pre-filter around the HEPA filter cartridge and secure it with the fasteners provided. Reassemble your Honeywell air cleaner as described below: 1. Place the assembled HEPA filter and the activated carbon pre-filter on the base. 2. Replace the filter cage cover. 3. Reattach the carrying handle and turn it clockwise until securely tightened. For Model Series 10500: Position the filter cage cover on the unit. Press down on filter cage cover and rotate clockwise until it snaps securely into place. Place the power control switch in the OFF position. • Check to make sure that the power cord is correctly connected to the outlet. • Test that the outlet is functioning properly using another appliance or lamp. • Check the fuse or circuit breaker. The outlet may be overloaded if other appliances are also in use. Determine and correct the cause of the overload. • The thermal overload protection device on the air cleaner's motor may have engaged. • If none of the above procedures restore operation, return your unit to the store or if the store's return policy does not allow, return the complete unit per the instructions in the warranty section of this owner's guide. Do not attempt to repair the unit yourself. If the Air Cleaner Does Not Operate... Model Series 10500 ............................; ..............; ....; ....; ....; ....; ; ....; ....; ............; ............; ............; ............; ............; ............; ............; ............; ............; ............; ................................; ................; ................; ................; ................; ................; ................ ; ; ..........; ; ; .. Storage... If you store your Honeywell HEPA air cleaner for more than 30 days, we recommend: • Remove both the primary HEPA filter and the activated carbon pre-filter from the unit. • Discard the pre-filter. • Wrap the HEPA filter in an air-tight plastic bag or plastic wrap. Be sure that the filter is totally sealed. • To restore the air cleaner to service, unwrap the HEPA filter, install a new activated carbon pre-filter, and replace both filters in the air cleaner. (See "How to change the Filters..." section for proper installation.) Limited Warranty... Honeywell HEPA Air Cleaner Model No. 10500, 11500, 12500, 13350, 13500 and 14500 Series This product has been engineered and crafted with great care for your satisfaction. Be sure to fill out and return the enclosed card within 7 days of purchase. A. This limited warranty applies to repair or replacement of product found to be defective in material or workmanship within 5 years of the date of purchase. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. HONEYWELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQ...

Download now

Please, enter two numbers from picture: