Votes - , Average rating: ( )

User manual Precisionaire, model Rings Panels Filter ST55R-2020

Manafacture: Precisionaire
File size: 46.5 kb
File name:

Language of manual:

The document is loading, please wait

Download nowClose

The document is loading, please wait

Download nowClose

Roll lengths are +/- 5% and widths are -0/+1/2". 2. Maximum roll widths are: SA600-G10 90.55" SAR-1 90.55" All other polyester medias 110" Fiberglass media 84" 3. Roll Lengths are: SA600-G10 792" SAR-1 100 ft. FP3 50 ft. 1GT 90 ft. PS125 90 ft. All other polyester media 100ft. Fiberglass media 300 ft. 4. Any width can be custom cut from 6" to maximum width for any media product. 5. Rolls are bagged in minimum 3-mil clear plastic bags. 6. Rolls are identified with a tag on top of each bag. 7. Rolls are individually packaged on LTL orders. 8. All rolls are knife cut without the use of hot wires. MEDIA PADS 1. Pad dimensions are -1/4"/+1/2" in each direction. 2. SA600-G10 and SAR-1 pads are bagged and boxed. Full perimeter of box is also taped. 3. All other pads are boxed only. 4. Fiberglass pads are available in vacuum-packed form. 25 pads per bag and 4 bags in each box for 100 filters per case. 5. SA600-G10 pads are folded exit side to exit side and rolled to prevent contamination from collecting on the exit side of the media. 6. All rolls are knife cut without the use of hot wires. MEDIA Each media has its own specifications for weight per square foot, loft, chemical resin weights, tackfier weights, MSDS sheets, etc. These documents may be obtained by contacting our corporate office. Media Varieties: SA600-G10 Each SA600 media pad and roll has its own model numer. No custom sizes are used for this media type. Model Number EX. SA600-361 or SA600-1001 The first 5 digits identify the SA600-G10 media. If there are three digits after the hyphen then it is a pad. If there are four digits after the hyphen, then it is a roll. Model Number descriptions must be looked up to identify the correct size, and each model number has a specific case quantity. SAR-1 Each SAR-1 media roll and pad also have their own model number.No custom sizes are used for this media type. Model Number EX. SAR1M-24120 or SAR1R-55 The first 4 digits identify the SAR-1 media. If the fifth digit is an M, then its a media pad, if its an R, then its a media roll. For the pads, the first two digits after the hyphen identify the pad width in inches, and the remaining digits identify the pad length in inches. For the rolls, the remaining digits identify the roll width in inches. 1GT 1GT media is available in rolls, pads and custom pads. All model numbers start with 1GT. The fourth digit is R for roll, P for pad, and C for custom. After the hyphen, the digits for rolls equal the roll length, the pad size is only listed in the description, and the digits following the hyphen for custom pads signify the total square inches for the custom pad. 330G,331Y,332 Fiberglass media are available in rolls, pads, custom pads, and vacuum packed pads. For the 330G and 331Y, the first two digits after the hyphen identify the roll length and if the last digit is a 0,1,or 2 then the length equals 200 ft. and if it equals 3 then its 300 ft. The 332 uses a "-300" for all 330 ft. rolls. The pads sizes are listed after the hyphen and if there is a 0 as the first digit after the hyphen then the last two digits are the pad width. If there is a V as the fourth digit, then the pads are vacuum packed. FP3 If there are only two digits after the hyphen, then its a roll and the width equals the two digits. If there are four digits after the hyphen, then its a pad and the dimensions are listed. Custom pad square inches are also listed after the 169 ManufacturingSpecificationsFor for Media Rolls & Blankets Conversion Formula for square inches to square feet HOW TO FIND CUSTOM PAD PRICING SA600-G10 and SAR-1 Custom Media Pads First find how many square feet are in the custom pad Do this by taking the length times the width in inches and dividing by 144. Example: 53.5"x24.5" = (53.5x24.5 / 144) = 9.10 square feet Second, multiply the square feet of the pad by the LIST price (SA600=$4.00 sq.ft./SAR1=$2.00 sq.ft.) Example SA600 G10 pad: 53.5"x24.5" = 9.10 sq. ft. so I multiply 9.10x4 = $36.40 LIST price for that pad Third, find the list price by multiplying the LIST price by the MULTIPLIER from the IDC code list The SA600-G10 multiplier for a jobber is .35 so I take $36.40x.35 and that is their cost (SA600=S1/SAR1=S2) The multiplier list is at the back of the catalog, and each product has a different multiplier Check your IDC code reference in the catalog to verify you are applying the correct multiplier We will then create a part number for that size and will include the part in our next catalog. All other custom media pads For all other medias, a custom range has been established. To find the correct part number, simply multiply the length times the width in inches to get the total square inches of the pad. EXAMPLE: 30"x30" = 900 square inches. Second, find the range that the part numbers falls in. For this size, the part number should be ****900- 999. This signifies any pad from 900 to 999 square inches. Be sure to include the exact size pad you want with the custom part number. Cust...