Votes - 1, Average rating: 5 ( )

Manafacture: Hunter Fan File size: 432.86 kb File name: 41669.pdf Language of manual:

Ionizer - Allows you to turn the ionizer ‘ON’. The green light will be illuminated when the ionizer is ‘ON’. RELEASE BUTTON (On each side) FILTER IONIZER POWER CONTROL PRE-FILTER FRONT GRILL COLOR CODED FILTER CHART 41669-01.pmd 3 4/11/05, 2:06 PM 3. The filter comes to you installed in the correct position. Grasp the filter, and pull it forward, up, and out of the unit. Remove the plastic wrapping and replace the filter in the unit. The white HEPAtech™ filter material should be facing outward (towards you). 4. Before closing the front cover, check the placement of the pre-filter. It is installed under clips in the front cover. The pre-filter should be replaced every three months. 5. Close the front cover by once again pressing the buttons and allowing the front cover to slip into place over the buttons. The unit is now ready for normal operation. 6. Plug the unit into a 120V electrical outlet. 7. Select a speed by sliding the speed selector to the appropriate location. The red power light will be illuminated when you have selected a speed. 8. Turn the ionizer ‘on’, by sliding the ionizer switch to the ‘on’ position. The green light will be illuminated when the ionizer is ‘on’. NOTE: The ionizer can release negative ions when the fan is not blowing. If it is used consistenly without the fan, the dust particles that are attracted to the negative ions may deposit on your walls and floors. To minimize these deposits, we recommend that you use the ionizer only when the fan is blowing (when the unit is on LO, MED, or HI speed). Cleaning And Filter Replacement 1. Every few weeks, you should open the front grill and view the condition of the HEPAtech™ System Filter. Compare the filter to the color coded chart that is on the inside of the housing. If the filter matches the dark color on the chart, you should remove the filter and replace it with a new filter. BE SURE TO REMOVE THE PLASTIC WRAPPING BEFORE PLACING THE NEW FILTER INTO THE AIR PURIFIER. 2. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water. 3. When you remove the front grill to clean it, you should also remove the pre-filter from the front grill. 4. Be sure the front grill is completely dry before you reassemble it with the unit. 5. Models 30027 and 30028 use Filter #30917. No other filter or material should be used unless approved by Hunter Fan Company. Replacement Parts To obtain a replacement part for your air purifier, contact customer service at (US) 1-888830- 1326, (Canada) 1-888-855-8300, or e-mail us at TechSupport@hunterfanhq.com. Please be prepared to tell the operator the model number of your air purifier and the name of the part you need to replace. Refer to figure 1 for part names. Models 30027 and 30028 use Model 30917 replacement filters and Model 30901 replacement pre-filters. 41669-01 04/11/2005 4 © 2005 Hunter Fan Company 41669-01.pmd 4 4/11/05, 2:06 PM 41669-01 04/11/2005 5 © 2005 Hunter Fan Company The above is an illustration of how the HEPAtech™ air purification systems work. Dust and other irritants are pulled into the air purification system and cleaned through the HEPAtech™ Filter. Clean, purified air is released into the room. Other Home Comfort Products from Hunter Old Time Ceiling Fan The Care-Free Humidifier™ Programmable Thermostat To learn more about Hunter Fan Company products, please see our web page at: WWW. HUNTERFAN.COM How the HEPAtechTM System Works 41669-01.pmd 5 4/11/05, 2:06 PM Hunter Fan Company HEPAtech™ Air Purification System 5 YEAR LIMITED WARRANTY The Hunter Fan Company makes the following limited warranty to the original residential user or consumer purchaser of the HEPAtech™Air Purification System: If any part of your HEPAtech™ Air Purification System (“Air Purifier”) motor fails during the first five (5) years from the date of installation to you due to a defect in material or workmanship, we will provide a replacement Air Purifier free of charge. Installation is deemed to occur at the date if purchase. If the Air Purifier cord, ionizer, or front grill fails any time within one (1) year after installation due to a defect in material or workmanship, we will replace or, at our option, repair the unit free of charge at our nearest service centre or at our Service Department in Memphis, Tennessee. You will be responsible for all parts and labour costs after this one-year period. USE OF A NON-HUNTER FILTER WILL INVALIDATE THIS WARRANTY. IF THE ORIGINAL RESIDENTIAL USER OR CONSUMER PURCHASER CEASES TO OWN THE AIR PURIFIER, THIS WARRANTY AND ANY IMPLIED WARRANTY WHICH THEN REMAINS IN EFFECT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE VOIDED. NO WARRANTY, EXPRESSED OR IMPLIED , INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RESPECT TO THE FILTER MATERIAL OR CARBON FILTER. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THE DURATION ...

Download now

Please, enter two numbers from picture: