Votes - 2, Average rating: 5
(
)
)
|
manual abstract
All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 Specifications Item Description Operating Pressure 160 PSI (maximum) Air Inlet and Outlet Size Inlet: 1/2" NPT Outlet: 1/4" NPT Features Replacable air filter element Overall Dimensions 11-3/4" Tall x 3-7/8" DIA. x 8-3/4"Deep Weight 5-1/2 lbs. Filter up to 40 microns Maximum Capacity 21 C.F.M. @ 90 PSI Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using tools, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool! 1. Keep work area clean. Cluttered areas invite injuries. 2. Observe work area conditions. Do not use in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use in the presence of flammable gases or liquids. 3. Keep children away. Children must never be allowed in the work area. Do not let them handle this product or other machines, tools, or extension cords. 4. Store idle equipment. When not in use, this product must be stored in a dry location to inhibit rust. Always lock up and keep out of reach of children. 5. Use the right tool for the job. Do not attempt to force a small tool or attachment to the work of a larger industrial tool. There are certain applications for which this product was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this product and do not use this product for a purpose for which it was not intended. 6. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. 7. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 8. Use eye and ear protection. Always wear ANSI-approved impact safety goggles when using and servicing this product and/or air tools. Wear a full face shield if you are producing metal filings or wood chips. Wear a NIOSH- approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. 9. Maintain tools with care. Keep clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect periodically and, if damaged, have them repaired by an authorized technician. The Filter/Regualtor must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect power. Unplug air compressor (not included) when not in use. SKU 1118 For technical questions, please call 1-800-444-3353 Page 2 11. Do not exceed maximum air pressure of 160 PSI. 12. Avoid unintentional starting. Do not carry any air tool with your finger on the trigger, whether it is plugged in or not. 13. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired. 14. Check for damaged parts. Before using Filter/Regulator, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use any air tool if its switch does not turn On and Off properly. 15. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. 16. Do not operate air tools if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the product. 17. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician. 18. Before using any air tool, read and adhere to all instructions and safety warnings provided in the instruction manual of the air compressor being used. Be sure to use compressed air only. Warning: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety Code 25249.5 et seq.) Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations ...