You and your pet deserve a companionship that includes memorable moments and a shared understanding together. Our products and training tools promote a lifestyle of protection, teaching, and love—essentials that influence memories for a lifetime. If you have any questions about our products or training your pet, please visit our website at or contact our Customer Care Center at 1-800-732-2677. PRODUCT WARRANTY To get the most protection out of your one-year warranty, please register your produc

1a). Level of water above the hy·drate™ will give a rippling or bubbling effect on top of the water. Both options provide continuous movement and filtration for cleaner, fresher water. Now, adjust the flow control on the pump based on the size of the bowl, desired flow of water or to reduce water splattering from the bowl (See Fig. 1a & 1c). After beginning operation of the hy·drate™, simply allow your pet to adjust at his or her own pace. Some pets may take several days or longer to begin use.

• For a portable appliance – To reduce the risk of electrical shock, do not place or store appliance where it can fall or be pulled into a tub or sink. • Always unplug any appliance when not in use, before putting on or taking off parts, and before cleaning. Never yank a cord to remove from the outlet. • Do not contact moving parts. • Always position power cords out of the way of foot traffic to avoid tripping. • Do not allow your pet to chew on the power cord or hy·drate™ product. • If the AC a

Some pets prefer drinking from a running source of water. To create a water stream effect, maintain a water level at the minimum H2O level noted on the hy·drate™ (See Fig. 1a). Level of water above the hy·drate™ will give a rippling or bubbling effect on top of the water. Both options provide continuous movement and filtration for cleaner, fresher water. Now, adjust the flow control on the pump based on the size of the bowl, desired flow of water or to reduce water splattering from the bowl (See

Once the parts are clean, reassemble the pump by replacing the impeller, stator, flow control (See Fig. 4) and the intake plate. Thread pump power cord back through pump cord pass-through and suction cup loop, and position pump onto the pump connector post in the upper shell (See Fig. 1a & 1b). Grasp the rubber fitting and pull through hole in upper shell until it snaps into place sealing the opening (See Fig. 1a & 1b). The length of the pump power cord may need to be adjusted by pulling either

To remove impeller use a fingernail to lift out; it is held in magnetically. Replaceflowcontrolbyplacing post into opening onthepumpmotor.AlignflowcontrolknobtoopeningonintakeplateandattachintakeplateFig. 4Fig. 3 Clean with warm soapy water. Use a cotton swab or a small cleaning brush to get into the motor cavity and remove any build-up. to pump. Terms of Use and Limitations of Liability 1. Terms and Use -This product is offered to you conditioned upon your acceptance without modifications of th