Votes - 2, Average rating: 5
(
)
)
|
manual abstract
**The efficiency rated dosage is only valid at the 6.0 lb. salt dosage. Buyer Signature _____________________________________________ Date __________ Seller Signature _____________________________________________ Date __________ Performance Data Sheet Culligan knows the more informed you are about your water treatment systems, the more confident you will be about its performance. It’s because of this and more than sixty years of commitment to customer satisfaction that Culligan is providing this Performance Data Sheet to its customers. IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs. It is recommended that before purchasing a water treatment unit, you have your water supply tested to determine your actual water treatment needs. MANUFACTURER: Culligan International Company, One Culligan Parkway, Northbrook, IL 60062-6209 USA • (847) 205-6000 PRODUCT: Culligan Medallist Plus Series™ 60 Water Softener with Time Clock TESTING CONDITIONS & RESULTS: Flow Rate: 10.0 gpm Pressure: 30 - 40 psi Acidity: Non-Corrosive Temperature: 68° (20°C) Capacity: pH: 7.6 32,600 grains @ 7.0 lb. salt 61,600 grains @ 18.0 lb. salt 71,700 grains @ 30.0 lb. salt SOFTENER SPECIFICATIONS: Maximum Flow Rate: 10.0 gpm (38 Lpm) Pressure Drop at Maximum Flow Rate: 14 psi (97 kPa) Operating Temperature Range: 33 - 120°F (1 - 50°C) NSF/ANSI 44 Water Softener Maximum Drain Flow Rate: 2.6 gpm (9.8 Lpm) 81WN Operating Pressure Range: 20 - 125 psi (140 - 860 kPa) Operating Pressure Range (Canada): 20 - 90 psi (140 - 620 kPa) The Culligan Medallist Series Water Softeners are tested and certified by WQA and UL against NSF/ANSI Standard 44 for the effective reduction of calcium and magnesium (hardness). Refer to the Specifications, Familiarization and Warranty section of this Owner’s Guide for more specific product information. To avoid contamination from improper handling and installation, your system should only be installed and serviced by your Culligan Man. Performance will vary based on local water conditions. The substances reduced by this system are not necessarily in your water. Culligan water softeners are designed to work with any salt of good quality, although it is recommended that you ask your local Culligan Man for his suggestion on the best type and grade of salt to use in this softener. NOTICE: This softener is not intended to be used for treating water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Buyer Signature _____________________________________________ Date __________ Seller Signature _____________________________________________ Date __________ Performance Data Sheet Culligan knows the more informed you are about your water treatment systems, the more confident you will be about its performance. It’s because of this and more than sixty years of commitment to customer satisfaction that Culligan is providing this Performance Data Sheet to its customers. IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs. It is recommended that before purchasing a water treatment unit, you have your water supply tested to determine your actual water treatment needs. MANUFACTURER: Culligan International Company, One Culligan Parkway, Northbrook, IL 60062-6209 USA • (847) 205-6000 PRODUCT: Culligan Medallist Plus Series™ 60 Water Softener with Soft-Minder® Meter TESTING CONDITIONS & RESULTS: Flow Rate: 10.0 gpm Capacity: Pressure: 30 - 40 psi Acidity: Non-Corrosive Temperature: 68°F (20°C) Efficiency pH: 7.6 32,600 grains @ 7.0 lb. salt 61,600 grains @ 18.0 lb. salt 71,700 grains @ 30.0 lb. salt Rated Dosage**: 4,664 gr./lb. NSF/ANSI 44 Water Softener 81WN SOFTENER SPECIFICATIONS: Maximum Flow Rate: 10.0 gpm (38 Lpm) Pressure Drop at Maximum Flow Rate: 14 psi (97 kPa) Operating Temperature Range: 33 - 120°F (1 - 50°C) Maximum Drain Flow Rate: 2.6 gpm (9.8 Lpm) Operating Pressure Range: 20-125 psi (140-860 kPa) Operating Pressure Range (Canada): 20 - 90 psi (140 - 620 kPa) The Culligan Medallist Series Water Softeners are tested and certified by WQA and UL against NSF/ANSI Standard 44 for the effective reduction of calcium and magnesium (hardness). This softener is efficiency rated, it has a Demand Initiated Regeneration (D.I.R.) feature which complies with specific performance specifications intended to minimize the amount of regenerant brine and water used in their operation. The softener has a rated salt efficiency of not less than 3350 grains of total hardness exchange per pound of salt used (based on NaCl equivalency), and shall not deliver more salt than its listed rating. The efficiency is measured by a laboratory test described in NSF/ANSI Standard 44. This test represents the maximum possible efficiency that the system can achieve. Operational efficiency is the actual efficiency achieved after the system has be...