Votes - 5, Average rating: 3.4 ( )

Manafacture: GSW File size: 564.77 kb File name: cdea4821-3208-457a-9383-9f75ec2fcd27.pdf Language of manual:

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause injury or - Installation and service must be performed by a qualified installer, or the gas supplier. other appliance. -WHAT TO DO IF YOU SMELL GAS · Do not try to light any appliance. property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the gas supplier. · Do not touch any electrical switch; do not use any phone in your building. · Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. · If you cannot reach your gas supplier, call the fire department. thoroughly before starting TABLE OF CONTENTS I) III) Venting IV) Water Piping.................................................................................................................................. 10 V) Gas Piping...................................................................................................................................... 10 VI) First Lighting.....................................................................................................................................................................11 VII) Service And Maintenance ................................................................................................................................................14 VIII) Combo Heating..................................................................................................................................................................16 IX) Troubleshooting.............................................................................................................................. 18 X) Warranty...................................................................................................................................... 19 This Manual Applies to Electronic Ignition Power Vented Water Heater Check The Specific Venting Label On The Water Heater For Details PLEASE RETAIN THESE INSTRUCTIONS IN A SAFE LOCATION FOR FUTURE REFERENCE PART NO. 50000 REV. ¬ (FF-06-99) -1- I) Introduction We thank you for choosing a GSW/ John Wood Water Heater. Your satisfaction with this product is very important to us. This gas-fired water heater has been developed to produce potable hot water and may also be used in combination with space heating applications. The “Superflue”O series is designed to vent the products of combustion (flue gases) horizontally through an exterior wall or vertically through the roof using an integrated blower assembly and plastic piping, without the need for a conventional chimney. Important Consumer Notice These instructions have been written for the proper installation, safe operation and maintenance of this water heater. It is your responsibility to ensure that your water heater is properly installed and cared for. FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL MAY RESULT IN SERIOUS BODILY INJURY AND /OR PROPERTY DAMAGE. THOROUGHLY READ ALL INSTRUCTIONS before you attempt to install or operate this heater. Installation and service require trade knowledge in the area of plumbing, electricity, venting, air supply and gas supply. If you lack these skills or do not understand these instructions, enlist the help of a qualified professional. GSW Water Heating Company, the manufacturer of this water heater, cannot be held liable for those damages caused by improper installation, sizing or failure to comply with these instructions. Approvals This water heater has been certified for operation using natural gas or propane gas fuel by the Canadian Gas Association (CGA) and design-certified by the American Gas Association Laboratories (AGA) through International Approval Services Inc. This heater is approved to provide potable hot water or when combined with a suitably-sized fan coil, baseboard heater, etc., to provide both space heating and domestic hot water. Installation Code Requirements Canadian Installations In addition to the installation instructions found in this manual, the heater shall be installed in accordance with the latest edition of CAN/CGA B149.1, B149.2 installation codes and/or any local codes. These shall be carefully followed in all cases. Authorities having jurisdiction shall be consulted before installations are made. All electrical connections shall be in accordance with the latest edition of the Canadian Electrical Code CSA C22.1 Part 1. U.S. Installations In addition to the installation instructions found in this manual, the heater shall be installed in accordance with the latest edition of the National Fuel Code ANSI Z223.1 (NFPA 54) and/or any local codes. These shall be carefully followed in all cases. Authorities having jurisdiction shall be consulted before installations are made. Important: All supply equipment, installation, Approvals, permits, inspections, ...

Download now

Please, enter two numbers from picture: