Votes - 2, Average rating: 4 ( )

Manafacture: Vulcan-Hart File size: 10.64 mb File name: Language of manual:

DO NOT USE AN OPEN FLAME. NOTE: These procedures apply to the left and right side burner subassemblies. 1. Remove the burner box cover as outlined in Covers, Panels and Handles. 2. Remove the burner assemblies as outlined in Burner Assemblies. 3. Remove the elbow pilot nozzles as outlined in Pilot & Elbow Nozzle. 4. Disconnect the burner tubing fitting from the burner sub-manifold. – 15 – 5. Loosen the two nuts on the burner sub- manifold. 6. Remove the burner sub-manifold from the broiler. 7. Reverse the procedure to install. PILOT MANIFOLD (GHIR44) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the burner box cover as outlined in Covers, Panels and Handles. 3. Disconnect the four pilot burner nozzles from the pilot manifold. 4.Remove the two washers and nuts from the pilot manifold. 5.Remove the pilot manifold from the broiler. 6.Reverse the procedure to install. 2. Disconnect the pilot tube from the pilot manifold. – 16 – OVEN BURNER ASSEMBLY (GHCB40) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the oven bottom assembly as outlined in Covers, Panels and Handles. 2. Lift and remove the oven burner assembly from the broiler. 3. Reverse the procedure to install. PILOT BURNER NOZZLES (GHIR44) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the burner box cover as outlined in Covers, Panels and Handles. 2. Remove the pilot manifold as outlined in Pilot Manifold. 3. Remove the two screws and plate from the broiler. 4.Remove the two screws and the pilot burner nozzle from the pilot support housing. 5.Remove the pilot burner nozzle from the broiler. 6.Reverse the procedure to install. – 17 – GAS VALVES, TUBING, THERMOSTATS, REGULATORS AND SOLENOIDS Burner Manifold Assembly (GHCB40) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the manifold cover assembly as outlined in Covers, Panels and Handles. 6.Disconnect the oven gas supply tube from the burner manifold assembly. NOTE: For proper alignment of the gas tubing, make sure you do not change the position of the stop nuts. 7.Remove the two nuts and two washers from the threaded rod. 8.Hold the burner manifold assembly and remove the two bolts, manifold holding bracket and two washers from the broiler. 9.Reverse the procedure to install. 2. Disconnect the burner tubing from the burner valves. 3. Disconnect the pilot supply tubing from the pilot valve. 4. Remove the two burner valves fro...

Download now

Please, enter two numbers from picture: