Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
14/01/04 WED 22:30 - 23:00 BBC1 [MISC. ] XP PRESS [PROGRAMME] TO EXIT [0]: SAT SELECT WITH [ THEN PRESS [ENTER] BBC1TV PROG 23:00STOP 22:30START HDDRECORD TO PROGRAMME > CALENDAR PR. (2/3) CONFIRM ENTER SELECTEXIT PROGRAMME 2 6 Press rtto select “START”, then press ENTER. Press rtto set the desired start time, then press ENTER. . Each press of rt advances/goes back the start time in 1-min. increments. . To advance/go back the start time in 30-min. increments, press and hold rt. 7 Press rt to select “STOP”, then press ENTER. Press rtto set the desired stop time, then press ENTER. . Each press of rt advances/goes back the stop time in 1-min. increments. . To advance/go back the stop time in 30-min. increments, press and hold rt. 8 Press rt to select “TV PROG”, then press ENTER. Press rt to select the desired channel. 9 Press rt to select “CONFIRM”, then press ENTER. 10 Set the other recording options as required. . Refer to step 8 in “SHOWVIEWTM Timer Programming” (. pg. 44). 11 Press rt to select “OK”, then press ENTER to access the Programme Confirmation screen. 12 Press we to select “EXIT”, then press ENTER to complete timer programming. . To programme another timer, press weto select “CONTINUE”, then press ENTER. 14/01/04 WED 22:30 - 23:00 BBC1 [EDUCATION] GARDENING FR360 1:00 28:00 ENTER SELECTEXIT SELECT WITH [ THEN PRESS [ENTER] MON-FRI (FOR A WEEK)WEEKLY/DAILY PROGRAMME OFFVPS/PDC EDUCATION CATEGORY GARDENINGINPUT TITLE PROGRAMME > CALENDAR PR. (3/3) O K FR360REC MODE PRESS [PROGRAMME] TO EXIT 2 . If “PROGRAMME OVERLAPPED” appears on the TV screen, see page 47. NOTES: . When two successive programmes are recorded on a DVD-RW disc with Manual Timer Programming function, the beginning of the second one may be left off the recording. . If the copy limited programme is received during timer-recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed. Satellite Receiver Users To timer-record a satellite broadcast using Manual Timer Programming: A Perform “Satellite Receiver Control Setting” (. pg. 23). B Perform “Manual Timer Programming” (. pg. 46). In step 8, press AUX to change “TV PROG” to “SAT”. Then press rtto enter the channel position for the satellite broadcast. C Leave the satellite receiver’s power on. Relief Recording When a programme that is set for the DVD deck cannot be recorded properly, the programme is recorded to the HDD deck instead in the same recording mode as set. . If the remaining capacity of the hard disc is not sufficient, the programme is recorded to the DVD deck until the remaining capacity of the DVD disc lasts. . If “JUST” is selected for the recording mode, the current recording mode for the DVD deck is applied. PROGRAMME ENTER rtwe CABLE/SAT DVD TV TIMER RECORDING EN 47 Check Programmes To check the whole list of programmes 1 Press PROGRAMME to access the programme top screen. 2 Press rtweto select “PROGRAMME LIST”, then press ENTER. . The details of a selected programme appear on the top of the screen. . The daily programme of a title is listed as one programme. To check the list of programmes by date 1 Press PROGRAMME to access the programme top screen. 2 Press rtweto select “CALENDAR LIST”, then press ENTER. 3 Press rt to select the desired date, then press ENTER. Cancel And Change Programmes . Repeat steps in “Check Programmes” to select a programme before proceeding. To cancel the programme 1 Press rtweto select “CANCEL”, then press ENTER. To modify the programme settings 1 Press rtweto select “MODIFY”, then press ENTER. 2 Change the settings of the desired recording options as required. . Refer to steps 4 – 12 in “Manual Timer Programming” (. pg. 46). To skip the weekly/daily programmes to the next week/day It is easy to temporarily cancel weekly/daily programmes of a week/day. 1 Press rtweto select “PROGRAMME SKIP”, then press ENTER. 2 Press weto select “SKIP”, then press ENTER twice. To save the titles of weekly/daily programmes (HDD Deck Only) Use this function to avoid overwriting titles of weekly/daily programmes of a previous week/day. 1 Press rtweto select “TITLE SAVE”, then press ENTER. 2 Press weto select “SAVE”, then press ENTER twice. NOTE: This function is available only when the remaining capacity of the hard disc is sufficient. TIMER RECORDING 48 EN Automatic Satellite Programme Recording . Make sure the satellite receiver is connected to the unit’s L-2 IN/ DECODER connector. . Programme the timer on the satellite receiver. . Slide the TV/CABLE/SAT/DVD switch to DVD. This function allows you to automatically record a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the unit’s L-2 IN/ DECODER connector and programme the timer on the satellite receiver. The unit starts or stops recording by the signals input from the satellite receiver. After recording, the unit’s power shuts off automatically. ATTENTION: . B...