Votes - 4, Average rating: 4
(
)
)
|
manual abstract
Always replace all of the batteries at the same time. If at any time the battery level is too low to operate the security safe, use the emergency access key. GUEST / USER CODE SETUP To reset the access code read and follow the steps below. 1) With the door open, enter a new 4-8 digits code and press the "#" key to confirm the new pass code. 2) You will hear and see the security lock engage and the word "CLOSE" will be displayed on the LCD screen. 3) Enter the new pass code and press the key again to open the security safe. The security lock will disengage and the word "OPEN" will be displayed on the LCD screen. 4) Close the door and enter the new code set up in step # 1 and press the "#" key. The word "CLOSE" will be displayed on the LCD screen and the security lock will engage. 5) If the Guest / User enters the wrong pass code three (3) times in a row the alarm will sound for 1 minute and will continue to sound in 1 minute intervals until the correct code is entered or the emergency access key is used to open the safe. RESETTING THE ADMINISTRATOR PASSWORD To reset the access code read and follow the steps below. 1) With the door open, press the key to activate the keypad, then press the "0" key twice, then press the "red" button on the battery compartment once to enter the programming mode. 2) Once in the programming mode you will hear a "Dl" sound and "----" will be shown in the LCD display. 3) Enter the new 4-8 digits administrator password and press the "#" key to confirm. 4) The word "INTO" will show on the LCD display to confirm the new password has been set up successfully. Avanti Products, Miami, FL 33172 Service Issues: 1 - 800 - 220 - 5570...