Login:
Votes - 3, Average rating: 3.7 ( )

User manual EverFocus, model EDSR400M

Manafacture: EverFocus
File size: 638.73 kb
File name: 7d7b93fc-cca2-4cb2-b21a-bbf75be01224.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


(6) PASSWORD: With up to 6 characters is supported in the digital video recorder. The available alphanumeric characters are: 0,1,2,3,4,5,6,7,8,9, A,B,C,……X,Y,Z / ( ) . -*& @ : “ The factory default setting for password is disable. Note: Security Lock Setting: When the image recording, press “ STOP” to enter the password. The screen will show as below: INPUT PASSWORD 123456 DONE PRESS MENU TO EXIT : Press or to move the cursor to the left or right. : Press or to change the value. 32 Recording 7.1 INSTANT RECORDING Press Record key to start the recording immediately. Video out When pressed, the pictures being monitored will be recorded in the HDD. REC 49% REC •The recording rate and recording quality are DISK: 78GB set in the Record Set menu • “ RECORD ” appears in the operating display Press Stop key to stop recording. • Stop key can be activated only in recording mode. STOP •When the HDD is full, the machine will Stop recording automatically or Overwrite from the beginning of the HDD. It depends on the setting in HDD setting 33 Recording 7.2 ALARM RECORDING During user setting “ON” in the ALARM OPERATION, The image will automatically record when alarm occurs , and will automatically stops recording at the end of the alarm duration period. As example, we set ALARM RECORDING SPEED on 60 IPS, and the ALARM DURATION TIME is 5 seconds, the screen will show as below, A. REC (60 IPS) DISK: 39 GB (0) Instant recording and timer recording will stop when an alarm occurs. Press MENU key and turn the jog dial to select the ALARM RECORDING SETTING MENU. MENU RECORDING OPERATION: ON: Enables alarm recording, OFF :Disables alarm recording. RECORDING SPEED: Set the recording speed when alarm occurs. RECORDING QUALITY: In alarm duration, the recording quality can be set which is different from instant or timer recording. ALARM – 1 TYPE ALARM – 2 TYPE ALARM – 3 TYPE ALARM – 4 TYPE Select the separate type of ALARM 1 to ALARM 4 TYPE input to be Normal Close (N.C.) or Normal Open (N.O.) 34 ALARM – RESET TYPE: Select the type of alarm-reset input to be Normal Close (N.C.) or Normal Open (N.O.) ALARM DURATION TIME: Alarm duration from 01 seconds to 90 seconds. PRE-ALARM OPERATION: ON: Enables pre-alarm recording, OFF: Disables pre-alarm recording. RECORDING SPEED: Set the recoding speed in pre-alarm duration. Notice: The recording quality in pre-alarm duration is the same as recording quality before alarm occurs. If the recorder is not recording before alarm occurs, the recording quality in pre-alarm duration will be the same as instant recording quality. 35 Playing Back 8.1 NORMAL PLAYBACK (1) Playback Press the PLAY key to start playing back the stored image/audio from the last SEGMENT. PLAY Press the REV.PLAY key to start reverse playing back the stored image/audio from the last segment. REV.PLAY (2) STOP Press the STOP key to stop playing back. STOP (3) Fast Forward/Reverse Playback Press the PLAY key to start playing back. PLAY Turn the shuttle dial clockwise and fast forward playback starts. The speed will be shown on the SCREEN at the right upper corner of the screen. >> 2, 4, 6, 8, 16, 32, 600X Turn the shuttle dial counterclockwise and fast reverse playback starts. The speed will be shown on the SCREEN. << 2, 4, 6, 8, 16, 32, 600X 36 Playing Back (4) Slow Forward/Reverse Playback During Playback,press PAUSE key to freeze the playing back picture. PAUSE Turn the shuttle clockwise and slow forward playback starts. The speed will show on the SCREEN at the corner of the screen. >> 1/2, 1/4, 1/6, 1/8, 1/10, 1/16, 1/32 Turn the shuttle counterclockwise and slow reverse playback starts. The speed will show on the SCREEN at the corner of the screen. << 1/2, 1/4, 1/6, 1/8, 1/10, 1/16, 1/32 (5)Field advance Forward/Reverse Press PAUSE key to freeze the picture. PAUSE Turn the jog dial clockwise to advance the still image Field by Field. Turn the job dial counterclockwise to rewind the still image Field by Field. The Field feed speed will increase if the jog dial is turned quickly. 37 Playing Back 8.2 SEARCH PLAYBACK (1) Segment Search Playback Press the SEARCH key to enter the Search menu. SEARCH SEARCH MENU BY SEGMENT LIST BY ALARM LIST BY DATA TIME Press the keys to move the cursor to BY SEGMENT LIST and press ENTER key to select file search. SEGMENT SEARCH 0001 A1 2002/04/24 19/03/29 0002 T 2002/04/25 12/30/30 0003 T 2002/05/20 12/00/00 A1 : ALARM RECORD by ALARM-IN T : TIMER RECORD Press the keys to move the cursor to the segment you want to playback. Press Enter to select the segment. When the selection list is full, turn the jog dial clockwise to select next page list for search other list. After the starting time is confirmed, press Enter to start playing back. 38 Playing Back (2) Alarm Search Playback Press SEARCH key to enter the Search menu. SEARCH SEARCH MENU BY SEGMENT LIST BY ALARM LIST BY DATE TIME ALARM SEARCH 1 A 2002/04/24 19/03/29 A1 :ALARM RECORD by ALARM-IN 2 T 2002/04/25 12/30/30 T : TIMER RECORD 3 T 2002/05/...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category