Votes - 3, Average rating: 4
(
)
)
|
manual abstract
SENSITIVITY : Set the sensitivity level. The sensitivity is from H (High), 9~ 2 and L (Low). MOTION RECORD TIME : Set the amount of time (in second) to record when motion is detected. 20 Chapter 4 Using the USB Playback Console Chapter 4 Using the USB Playback Console 4.1 Recommended system requirements Pentium®4 2.4GHZ or above Windows®2000/ XP DDR 256 MB Graphic function must support DirectDraw Audio card or built-in Speaker 1 available USB2.0 port 4.2 Installing the USB Playback Console To install the USB Playback Console: 1. Place Installation CD into the CD-ROM drive. When the installation main screen appears, click Install USB Playback Console and then follow the on screen instructions 2. Select the language you prefer 3. Click OK to install the application 4. Click Exit to close the installation main screen. 5. You may now connect the DVR unit to PC by using USB cable. 6. Also, user can remove the hard disk and place in external USB enclosure, and then connect to PC for playback, too. 21 4.3 Running the USB Playback Console To run the application, click the icon on the PC desktop (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (17) (12) (13) (16)(15)(14) Name Function (1) Video playback screen To select the video file for playing. The playback application supports *.dvr and *.avf file type. (2) Open File -DVR Recorded File (HD): To playback the recorded video from the hard disk which was recording video on the DVR system. (Also see 4.3.2) -Backup File(.dvr): The file is backup and save in *.dvr file format. (Also see 4.3.3) 22 Name Name Function Select the event you want to playback. The event list only available when user select to playback in DVR Recorded File(HD). (3) Event List (4) Full screen Use the entire area of the screen to only display the video. To return, press the right button of the mouse or ESC on the keyboard. When you switch to full screen in multiple-screen mode, Left click to toggle to only display one of the video in the multiple-screen mode or all. (5) Segment Keep a portion of the recorded video (see also 4.3.1) (6) Output Save the segmented file in *.mpg or *.avi format (see also 4.3.1). (7) Snapshot Capture and save the image either in *.jpg or *.bmp format (8) Print Print the image (9) HDD Backup To call out HDD Backup application. (See Chapter 5) (10) iEnhance To call out iEnhance application. ( See Chapter 7) (11) Watermark To call out ImageVerification application. (See Chapter 6) (12) Status bar Display the recorded date, time and play speed. (13) Progress bar Show the progress of the file being played. You may move the bar to seek at any location of the track. (14) Playback Controller (15) Split Screen Mode Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame by frame. Slower: Play the recorded video file at the speed of 1/2x, 1/4x or 1/8x. Rewind: Wind back the recorded video file. Pause: Briefly stop playing the recorded video file. Play: Play the recorded video file. Faster: Play the recorded video file at the speed of 2x, 4x, or 8x. Next: Go to the next frame by frame. End: Go to the end of the recorded video file. Select from different screen view to playback the recorded video file of the entire camera or one camera on screen. Exit/ Minimize the application or chose Cancel to go back to the application (16) Exit 23 Name Name Function Turn on and off the sound (17) Sound /Sound bar Increase and decrease the volume 4.3.1 To Cut and Save the Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to start the cut. Then, click Segment to set the begin mark. 2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to end the cut. Then, click Segment to set the end mark. To cancel segmentation, click Segment button again. 3. Click Output button to save the wanted portion. 4. In the Save As dialog box, locate on where user wants to save the file, type the filename, and select the video format. 4.3.2 Playback DVR Recorded File from Hard Disk 1. Please have the hard disk which containing of recorded video data install on your PC or using external USB enclosure to connect to your PC. 2. Click Open File button 3. Select DVR Recorded File(HD) and click OK. 4. Select the hard disk drive from Select Disk window and click OK. 5. And then, the Event List window appears. Select the event that user wants to play and click OK. 24 4.3.3 Playback Backup File(*.dvr) 1. Click Open File button. 2. Select Backup File(*.dvr) and click OK. 3. Locate the backup file folder and click OK. i When open the backup video file, just locate the where backup file is located. 4. And then, Playback Date/Time Selection window appears. Select the date and time and click OK. 25 Chapter 5 Backup Recorded Video File Chapter 5 Backup Recorded Video File 5.1 Recommended system requirements Pentium®4 2.4GHZ or above Windows®2000/ XP DDR...