Votes - 1, Average rating: 5
(
)
)
|
Photos and specs Canon VB-M40 |
Other manuals for this model:
Security Systems - VB-M40 (1.73 mb)
Security Systems - VB-M40 (10.84 mb)
manual abstract
8-2). • Even if recording-mode stream transmission or uploading fail, the maximum number of images that can be stored on the SD memory card per method is 100,000. • New files cannot be saved to the SD memory card if there is no free space or the file limit has been reached. 5 Setting Page 5-31 [Reboot Item] Setting Items Requiring Rebooting The following settings that require rebooting before changes take effect can be found on a single page. • LAN, IPv4, IPv6, H.264, Installation Conditions (VB-M40 only) HTTP Server Important These settings relate to network connectivity. If any setting is changed to a value that may disable camera connection from the active web browser, a dialog box appears and alerts the user. Click [OK] to apply the new setting. Depending on the new setting, it may not be possible to connect to the camera again after rebooting. If this happens, a candidate URI for reconnecting the camera will appear if available. Try the URI displayed to reconnect the camera. If you cannot connect to the camera through the displayed URI, contact your System Administrator. * Settings related to network connectivity in the [Reboot Item] menu are [LAN Interface], [Maximum Packet Size], [IPv4 Address Setting Method], [IPv4 Address], [Subnet Mask], [IPv4 Default Gateway Address], [IPv6], [Auto], [IPv6 Address (Manual)], [Prefix Length], [IPv6 Default Gateway Address], [HTTP Port] and [HTTPS Port]. 1 [LAN] LAN interface, maximum packet size settings (P. 5-5) 2 [IPv4] IP address, IPv4 settings, etc. (P. 5-5) 3 [IPv6] Settings regarding IPv6 (P. 5-6) 4 [Installation Conditions] Settings regarding camera installation conditions (P. 5-11) 5 [H.264] Settings regarding H.264 image size and frame rate (P. 5-13) 6 [HTTP Server] Authentication method, HTTP, and HTTPS port settings (P. 5-19) [Maintenance] Viewing Event Logs and Current Settings and Performing Maintenance The following items can be used here. •Tool Display or Initialize Camera Settings Tool 5 Setting Page 1 [View Logs] Display a history of camera operations and connections to each viewer, etc. 2 [View Current Settings] Display a list of current settings. 3 [Reboot] The camera is rebooted. 4 [Restore Settings] Discard user-defined settings and restore all setting items to factory default settings except camera administrator password, network setting, date, time, time zone, SSL certificate and encrypted communications. Executing this operation will reboot the camera automatically. Caution • • You must not turn off the camera while it is performing the [Restore Settings] operation. Turning off the camera at this stage may result in making it unable to boot correctly. Never touch the camera head during initialization. Initialization failure or malfunction may result. Note • It is recommended that you write down all current setting values before restoring factory default settings in [Restore Settings] (P. 8-20). • The camera can be restored to factory default settings using the reset switch as well. Note, however, that this will reset all camera settings to factory default settings except for date and time (P. 8-19). 5-33 5-34 Chapter 6 Admin Tools . Privacy Mask Setting . Panorama Image Registration . View Restriction Setting . Camera Preset Setting . Intelligent Function Setting . Viewing Logs Admin Tools Overview Admin Tools consists of applications for remotely making camera settings, checking operating conditions, and acquiring logs. Admin Tools (P. 6-4) This is the top page of Admin Tools. All tools can be launched from this page. Privacy Mask Setting Tool (P. 6-5) A tool that lets you hide areas you don't want to be seen by setting privacy masks. Up to eight areas can be masked, allowing thorough protection of privacy. View Restriction Setting Tool (P. 6-12) The View Restriction Tool restricts the viewable capture range in the VB Viewer. You can set the desired range with the mouse by referring to the preview in panorama mode. Preset Setting Tool (P. 6-16) Panorama Creation Tool (P. 6-9) A panorama image creation tool that shows the entire area that can be captured by this camera. Once a panorama image is captured and registered, it is shown in the panorama display panel of the viewer. As the panorama image is also shown when view restrictions and presets are set, you can see at a glance which part of the entire area the set area is occupying. A tool that lets you set presets and the home position visually. You can make the desired settings with the mouse by referring to the preview in panorama mode. You can also set [Preset Tour] whereby the camera tours and monitors multiple presets. Intelligent Function Setting Tool (P. 6-22) This tool is used to set intelligent functions that perform uploads, notify the viewer, record a log, etc., if a change has occurred in the captured image due to movement of a subject. By setting the conditions, you can let the camera detect events such as “abandoned object”, “removed object”, “camera tampering”, etc. You can ...
Other models in this manual:Security Systems - VB-M600D (10.28 mb)
Security Systems - VB-M600VE (10.28 mb)
Security Systems - VB-M700F (10.28 mb)