Votes - 4, Average rating: 4.5 ( )

Manafacture: Honeywell File size: 4.96 mb File name: Language of manual:

Password: admin. (administrator, local and network) • Username: 888888. Password: 888888. (administrator, local only) • Username: 666666. Password: 666666(Lower authority user who can only monitor, playback, backup and etc.) • Username: default. Password: default(hidden user) You can use the USB mouse, front panel, remote controller or keyboard to input. About input method: Click or press Shift on the front panel to switch between numbers, English character (small/capitalized) and denotation. Note For security reasons, please modify the password after your first login. Within 30 minutes, login failure three times will result in a system alarm buzz and login failure five times will result in account lock. Figure 4-1 Menu Login Main Menu After you have logged in, the system main menu will appear as shown below. See Figure 4-2. There are a total of six icons: search, information, setting, backup, advanced and shut down. You can move the cursor to highlight the icon, and then double-click the mouse to enter the sub-menu. Figure 4-2 Main Menu Logout There are two ways for you to log out. One is from menu option: In the main menu, click the shut down button, and you can see an interface as shown below. See Figure 4-3. Figure 4-3 Logout Menu You have several options. See Figure 4-4. Figure 4-4 Options for Logout The other way is to press the power button on the front panel for at least 3 seconds, causing the system to stop all operations. Then you can click the power button in the rear panel to turn off the DVR. Auto Resume after Power Failure The system can automatically backup video and resume its previous working status after power failure. Replace Button Battery Please make sure to use the same battery model if possible. We recommend regular battery replacement (such as one-year) to guarantee system time accuracy. Manual Record Live Viewing After you have logged in, the system is in live viewing mode. You can see the system date, time and channel name. If you want to change the system date and time, you can refer to general settings (Main Menu.Setting.General). If you want to modify the channel name, refer to the display settings (Main Menu.Setting.Display). 1 Recording status 3 Video loss 2 Motion detection 4 Camera lock Note Live audio will only be played under the single channel video display mode. Manual Record Note You need to have proper rights to implement the following operations. Please make sure the HDD has been properly installed. Manual Record Menu There are two ways for you to go to the manual record menu. • Right-click the mouse to select Record, or in the main menu proceed to Advanced.Manual Record. • In live viewing mode, click the record button in the front panel or the record button in the remote control. Manual record menu is shown in Figure 4-5. Basic Operations There are three modes: schedule/manual/stop. Please highlight icon”0” to select the corresponding channel. • Manual: The highest priority. After being set to manual mode, all selected channels will start regular (continuous) recording. • Automatic: Channel recording follows recording schedule setting (Main Menu.Setting.Schedule) • Closed: the channel stops recording. Figure 4-5 Recording Control Menu Enable/disable recording in specified channels Please check the current channel status: “0” means it is not in recording status, “.” means it is in recording status. You can use the mouse or direction key to highlight the channel number. See Figure 4-6. Figure 4-6 Different Status of Manual Record Enable/disable recording in all channels Highlight 0 below All, you can enable all channel recording. • Automatic recording in all channels Highlight “ALL” after “Automatic”. See Figure 4-7. When system is in automatic recording, all channels will be recorded as you set up in Main menu.Setting.Schedule. The corresponding indication light on the front panel will turn on. Figure 4-7 Automatic Recording in All Channels • Manual recording in all channels Highlight “ALL” after “Manual.” See Figure 4-8. When the system is in manual recording, all channels will start continuous recording, neglecting the recording schedule (Main menu.Setting. Schedule). You will see an indication light on the front panel turn on, indicating that the system has begun to manually record. Figure 4-8 Start Manual Record in All Channels Stop all channel recording Please highlight “ALL” after “Closed”. See Figure 4-9. The system stops all channel recording no matter what mode you have set in the menu (Main menu->Setting->Schedule). Figure 4-9 Stop Recording in All Channels Search & Playback Search Menu Click the search button in the main menu, search interface is shown below. See Figure 4-10. Usually there are three file types: • R: Regular recording file. • A: External alarm recording file. • M: Motion detection recording file There are several playback windows. Usually the system supports 1/2/3/4-ch playback, and HD-DVR-1016 also supports 16-ch playback. Serial Number Fig...

Download now

Please, enter two numbers from picture: