Login:
Sorted: Name ↓   Downloads   Rate   Size ↑  
downloaded: 2   File size: 1 mb   Manafacture: Toshiba  
Category: Tape Players
@name

This unit is fully transistorized and does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read owner’s manual After unpacking this product, read the owner’s manual carefully, and follow all the operating and other instructions. 2. Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not

downloaded: 0   File size: 1 mb   Manafacture: Toshiba  
Category: Tape Players

When selecting channels 1 to 9, first enter 0 and then the desired number. 100 To substitute for 100 channel key. DISPLAY To turn on or off TV’s screen display. ENTER To use for the TV’s ENTER key. Point the remote control at your TV and use each button listed below to make sure that your TV is operate correctly. Important Some TVs may not respond to all the operations above, or may not be operated at all with this remote control. In this case, operate your TV with it’s own remote control. SLOW

downloaded: 1   File size: 412 kb   Manafacture: Toshiba  
Category: Tape Players
@name

• Turn ON the VCR POWER button. • Press the TV/VCR selector button to select the VCR mode. When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV. 1 Load a cassette tape with the erase prevention tab intact. The VCR will automatically turn on. RECORDING A TV PROGRAM (Continued...) 2 Press the SP/SLP selector button to select the desired tape speed SP or SLP. The counter and SP or SLP will appear on the screen for about 4 seconds. 00 : 00 : 00 S

downloaded: 1   File size: 1 mb   Manafacture: Toshiba  
Category: Tape Players

A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 16. Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen into the product. c) If the product has been exposed to rain or water. d) If th

downloaded: 9   File size: 1 mb   Manafacture: Toshiba  
Category: Tape Players
@name

No power. • The power cord is not plugged in. – Plug the power cord into the outlet firmly. Although the power is on, the VCR will not work. • There is no cassette. – Load a cassette. (page 18) The clock does not work. • There has been a power failure. – Reset the clock. (page 15) The timer does not work pr. operly • The time is incorrect. – Set the clock correctly. (page 15) The picture does not appear on the TV screen. • The video channel or video input mode is not set correctly. – Set the TV

downloaded: 0   File size: 695 kb   Manafacture: Toshiba  
Category: Tape Players
@name

2) Choose another channel using the channel selector on the TV. Skipping unnecessary scenes while recording Press PAUSE/STILLto stop recording momentarily. To resume recording, press PAUSE/STILLagain. Note The VCR automatically shifts to the stop mode if the recording pause mode continues for 10 minutes. Recording off time setting By setting the recording off time, the recording stops and the VCR is turned off automatically. While recording, press simultaneously both REC on the remote repeatedly

downloaded: 1   File size: 1019 kb   Manafacture: Toshiba  
Category: Tape Players
@name

Keep them away from heaters. Avoid extreme humidity, vibrations or shock, strong magnetic fields (near a motor, transformer or magnet) and dusty place. PLAYBACK Playback This section explains the basic playback operation. Preparation • Select the video channel (3 or 4) or video input mode on the TV. • Press VCR to set the remote control operating the VCR. TVVCR PROG. ENTER TV/ VCR POWER CH/TRK TV VOL I.SELECT REMAIN/ COUNTERDISPLAY COUNT RESET SP/ SLP REC TIMER SLOW PLAY/x2 PAUSE /STILL REW F F

downloaded: 0   File size: 579 kb   Manafacture: Toshiba  
Category: Tape Players
@name

How to Use the Remote Control ...... 10 Connections ...................................... 11 Auto Set Up ....................................... 14 Initial Settings Using On-screen Display ............................................... 15 • Setting the Language • Optional settings on the SET UP screen • Setting the Clock Storing Channels on the VCR .......... 17 Video Cassette Use .......................... 20 PLAYBACK Explains variable functions concerning playback. Playback .................

downloaded: 0   File size: 689 kb   Manafacture: Toshiba  
Category: Tape Players

This is not a defect in the unit. Adjusting Still Picture Stability If the still picture is distorted or flickers, hold down one of CH/TRK until the picture becomes stable. Note The distortion of the still picture may not be eliminated completely. The tape runs at 1/7th or 1/15th the normal playback speed. 1 Press SLOW during playback. The tape runs at about 1/7th the normal playback speed. Each time you press SLOW, the speed alternates between 1/7th and 1/15th. To resume normal playback Press P

downloaded: 5   File size: 639 kb   Manafacture: Toshiba  
Category: Tape Players
@name

PLA YBACK PLA YBACK Variable Speed Playback You can play back a tape at various tape speeds. 1 2 3 4 5 6 7 8 9 0 a + – 8 9 J PR OG + – REV FWD ( ) - L FF PAUSE/STILL SLOW TRACKING Picture Search A tape runs at 5 times or 7 times the normal playback speed so that you can quickly locate a particular scene. 1 Press FF or REW during playback. The tape runs at 5 times the normal playback speed. 2 To change the tape speed to 7 times the normal playback speed, press and hold FF or REW. If you release i





Category