Votes - 0, Average rating: 0
(
)
)
|
manual abstract
•
•
•
Important Safeguards
Connections
T
Before Using
Connections / Initial Setup (Ready to Play)
Playback / Record on a Tape
Timer Recording
Location of Controls
imer Recording
Important Safeguards and Precautions
Congratulations
Please make all cable or antenna connections before plugging into the AC
Head Cleaning
Playback a Tape
Record on a Tape
Timer Recording
Remote Control Buttons
FOR YOUR SAFETY, READ AND RETAIN
OUTDOOR ANTENNA INSTALLATION
outlet.
on your new purchase! With proper use, this
ALL SAFETY AND OPERATING
1
SAFE ANTENNA AND CABLE CONNECTION
Old or damaged tapes may clog heads.
Plugging the VCR Power Cord into an AC wall outlet starts auto channel and clock set.
dependable product will provide years of
1 Insert a tape.
If an outside antenna or cable system is connected to the
1 Insert a tape with a record tab (p. 3).
1 1) Press PROG*.
INSTRUCTIONS. HEED ALL WARNINGS IN
VCR (mode)
enjoyment. Please fill in the information below.
TV (mode)
equipment, be sure the antenna or cable system is grounded
Video Head Clog Sensor
• Loose or peeling labels
THE MANUAL AND ON THE UNIT
Connecting
• VCR power comes on. “VCR” lights
2) Press to display program screen.
(Enables VCR functions)
so as to provide some protection against built up static
(Serial number is on tag on back of VCR.)
(Enables TV functions)
Screen-right appears during
may cause tape jam.
on Multi Function Display.
•
charges and voltage surges.
INSTALLATION
Initial Setup
Example
NEC - NATIONAL
play if clogging is detected.
V I DEO HEADS MAY
• VCR power comes on. “VCR” lights
If Auto VCR/TV (see p. 10 of
ELECTRICAL CODE
TIMER PROG. LIST
Section 810 of the National
1) Set record DATE,
POWER
POWER
DISPLAY
ANTENNA
• Date of Purchase
NEED CLEAN I NG
1
POWER SOURCE CAUTION
LEAD IN
For ANT./Cable
2
DISPLAY
Electrical Code, ANSI/NFPA
Advanced Operations book) is set to
WIRE
To remove screen, press
PLEASE I NSERT HEAD
➛ VCR ➛ TV
DATE
START
STOP
CH
on Multi Function Display.
Today
(Turns VCR off/on)
VCR
TV
GROUND
CLEAN I NG CASSETTE
VCR
IN FROM ANT.
Operate only from a power source indicated on
13 SAT --:-- --:-- --
press
to select:
(Displays VCR status)
70 (in Canada, part 1 of the
CLAMP
• Dealer Purchased From
VCR/TV
PLAY.
OR REFER TO MANUAL
TV
If Auto VCR/TV (see p. 10 of
“OFF,” press VCR/TV until “VCR”
TODAY
the unit or in this manual. If necessary, have
Canadian Electrical Code)
ANTENNA
1
•
DISCHARGE UNIT
Connect cable from
SLP
1~31= one time,
lights on the Multi Function Display.
(NEC SECTION 810-20)
VCR/TV
1
Advanced Operations book) is set to
2
3
NUMBER Keys
your Electric Utility Service Company or Video
SELECT START DATE
provides information with
ELECTRIC
• Dealer Address
• Use “dry” type head
8 9
31
1
2
6
Location of Contr
SERVICE
END : PLAY
Products Dealer verify the power source in your
GROUNDING CONDUCTORS
EQUIPMENT
(NEC SECTION 810-21)
Antenna/Cable to VCR’s IN
1 IN from
or DAILY= MON~ FRI,
(For TV or VCR mode)
(Selects channel directly)
“OFF,” press VCR/TV until “VCR”
respect to proper grounding
SELECT :
INPUT
SET:
home.
GROUND CLAMPS
• Dealer Phone No.
cleaning cassette only.
ANT./CABLE
END : PROG
of the mast and supporting
lights on the Multi Function Display.
or WEEKLY= same time
SELECT / Selection Order
DAILY
POWER SERVICE GROUNDING
7
(Part No. NV-TCL30PT is recommended.)
2
ELECTRODE SYSTEM
•
FROM ANT. jack.
INPUT
4
5
6
ADD/DELETE
2
POLARIZED OR GROUNDING PLUG
structure, grounding of the
Press CH
or NUMBER keys
(NEC ART 250, PART H)
• Model No. PV-V4523S
Accessories
each week and press .
As a safety feature, this Video product comes
lead-in wire to an antenna discharge unit, size
• Follow cleaning tape instructions carefully.
(For LINE or channel)
SPEED
WEEKLY
(Adds or deletes a channel)
WEEKLY
WEEKLY
2 Connect VCR’s OUT TO TV
OUT TO TV
to select the channel.
with either a polarized power cord plug (one
of grounding conductors, location of antenna discharge unit,
• Serial No.
Excessive use of tape can shorten head life.
2) Set remaining items,
(SAT)
(MON)
(SUN)
• For “LINE” input, see p. 9 of “Advanced
SPEED
7
8
9
blade is wider than the other), or a three-wire
connection to grounding electrodes and requirements for the
jack to TV’s ANT. IN jack
2 Press PLAY to play tape.
•
SEARCH/ ENTER
grounding type plug.
2
Clock Set
Operations” book.
press
to select and
grounding electrode.
(Changes tape speed)
EJECT
ADD/DLT
(Set search system /Tunes TV channel)
• If tape has no rec. tab (p. 3), auto play begins.
100
VHF/UHF
0
POLARIZED PLUG CAUTION:
2
KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER
with included RF Cable
Accessories
• If recording from a channel over 100, first
press to set START/ STOP times, CH (channel) or
EJECT
LINES OR CIRCUITS
CM/ZERO
SEARCH
This plug will only fit into an outlet one way. If you
PLAY (Plays a tape)/
accessory.
press 100 key then the other 2 digits.
LINE input (p. 9 of Advanced Operations book), and
cannot fully insert the plug, try reversing it. If it still
An outside antenna system should be located well away
Cleaning the VCR
(Ejects tape)
Special Features During Play
Remote Control
FAST FORWARD/SEARCH
from power lines, electric light or power circuits and where it
Batteries 2 “AA”
PLAY
will not fit, have an electrician install the proper wall
tape speed (p. 3).
outlet. Do not defeat the safety feature by tampering
will never come into contact with these power sources if it
Use soft, dry cloth or dusting attachment of a
For DSS/Cable Box
LSSQ0389
➛ VCR ➛ TV
COMMERCIAL SKIP/
(Fast forwards tape/ forward visual
•
Forward/Reverse Scene Search
3
with the plug.
should happen to fall. When installing an outside antenna,
vacuum to remove dust from all cabinet vent
Head Cleaning
Press SPEED
Press PROG to end programming.
ZERO SEARCH
REW
FF
search)
ols (Remote Contr
SELECT
extreme care should be taken to avoid touching power lines,
to select record speed (p. 3).
POWER
1 Connect your cable box’s
TV
IN FROM ANT.
DISPLAY
GROUNDING PLUG CAUTION:
VCR
Cable TV
➛ Press FF or REW.
holes. You may moisten cloth with nonabrasive,
(Starts COMMERCIAL SKIP/ Zero Search)
REWIND/SEARCH
VCR
TV
circuits or other power sources as this could be fatal.
Converter Box
•
VCR/TV
This plug will only fit into a three-hole grounding
Because of the hazards involved, antenna installation should
1
2
3
antistatic cleaner/ polisher.
OUT jack to the VCR’s IN
➛ Press PLAY to release.
Select Channel
TIMER PROG. L I ST
(Rewinds tape/ reverse visual
ACTION
outlet. If necessary, have an electrician install the
INPUT
3
To Enter More Programs
DT START STOP CH SPD
be left to a professional.
4
5
6
After search has begun, each additional
13 2 : 00 P 3 : 20P 02 SLP
ACTION
STOP
PROG
Caution:
Press
to select and
search)
proper outlet. Do not defeat the safety feature by
4 Press REC
SPEED
FROM ANT. jack with an RF
-- -- : -- -- : -- -- --
7
8
9
tampering with the plug.
USING THE VIDEO UNIT
RF Coaxial
press of FF or REW changes speed as
-- -- : -- -- : -- -- --
(Displays menu)
TAPE
RESET
EJECT
ADD/DLT
Alcohol and various solvents could damage
IN from
STOP (Stops tape)
REC
to start recording.
-- -- : -- -- : -- -- --
press to set an unused program.
POSITION COUNTER PAUSE/SLOW
100
0
cable.
3
POWER CORD
If the unit has been in storage or moved to a new location, refer
Cable
ANT./CABLE
CM/ZERO
SEARCH
finish.
shown below.
CANCEL : ADD / DLT
OUT TO TV
• To edit, press PAUSE/SLOW to pause,
PLAY
Then repeat step 2.
RECORD
first to the INSTALLATION section of these safeguards.
Remote keys
Make sure power cords are routed so that they
LSJA0372
1
SELECT : SET :
2 Connect VCR’s OUT TO TV
[SLP] : Approx. 21X
REW
FF
↔ Approx. 9X
EXIT : PROG
1
KEEP THIS VIDEO UNIT AWAY FROM WATER OR
(Records a program, etc.)
are not likely to have anything rest on them, roll
and again to resume recording.
SELECT
PLAY, STOP, REW, and FF
Or, press PROG to exit.
over them, or be in the way of walking traffic.
MOISTURE OF ANY KIND.
ACTION
PROG
[LP]
: Approx. 9X
STOP
jack to TV’s ANT. IN jack
↔ Approx. 7X
VHF/UHF
function as
2
TAPE
RESET
If an extension cord is used, make sure it also
REC
2
IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
POSITION COUNTER PAUSE/SLOW
[SP] : Approx. 7X
TAPE POSITION
↔ Approx. 3X
operation keys when menus
has either a polarized or grounded plug and that
STRONG IMPACT, unplug the unit and have it inspected by
with included RF Cable
4 Press POWER off to set the timer recording. (“TIMER” lights on Multi Function Display.)
(Locates tape position)
SAP/Hi-Fi
VOL
CH
WARNING
5 Press STOP to stop recording.
the cords can be securely connected. Frayed
Specifications
If at 21X, 9X, or 7X speed the picture is
a qualified service technician before use.
•
are displayed.
SAP/Hi-Fi
VOL
CH
Loading Batteries
cords, damaged plugs, and damaged or cracked
accessory.
interrupted, change speed to 9X, 7X, or 3X.
3
DURING AN ELECTRICAL STORM
Over tightening “Nut type” RF coaxial cables
COUNTER RESET
TRACKING
wire insulation are hazardous and should be
Power Source:
120 V AC, 60 Hz
TRACKING
ol Buttons,
During a lightning storm, whether indoors or outdoors, or
•
(Resets counter to zero)
replaced by a qualified service technician.
may damage jacks. Finger tighten only.
One Touch Recording
Playbac
before leaving the unit unused for extended periods of time,
Power Consumption:Power On
Initial Setup (Ready to Play)
Notes
Overloaded outlets and extension cords are fire
disconnect all equipment from the power source as well as
(recording in progress)
Review, Replace, or Clear Program
Cancel a Timer Recording
Approx. 23 W
SAP/Hi-Fi
PROGRAM
hazards and should be avoided.
the antenna and cable system.
• Picture interruption may occur with some TVs.
Power Off
Press REC repeatedly to set length as follows:
(Selects audio mode for play
(Displays Timer Program screen)
4
DO NOT BLOCK VENTILATION HOLES
1 Turn TV on and tune to channel 3.
3 Settings are made automatically.
4
WHEN THE UNIT IS PLUGGED IN
• FF and REW search speed may vary
(Recording is not in progress)
(Recording is in progress)
or record)
Ventilation openings in the cabinet release heat
Approx. 3.0 W
30 min. ➛ 1 hr. ➛ 1:30 ➛ 2:00 ➛ 3:00
• Never expose the unit to rain or water. DO NOT
When setup is done, this screen
PAUSE/SLOW
depending on current tape position.
generated during operation. If they are blocked,
OPERATE if liquid has been spilled into the unit.
To order accessories, call toll free
Video Signal:
EIA Standard NTSC color
2 Plug VCR Power Cord into AC wall
➛ 4:00 ➛ exit.
(Displays still, frame by frame,
heat build-up inside the unit can cause failures
appears.
Immediately unplug the unit, and have it inspected by a
1-800-332-5368.
Video Recording
4 rotary heads helical
outlet. VCR comes on and auto
The VCR shuts off at the length set.
k
a 1) Press PROG.
Press POWER and then STOP within 10
or slow motion picture)
that may result in a fire hazard or heat damage
Still (Freeze) Picture
F
service technician. Fire and shock hazards can result from
System:
scanning system
to cassettes. For protection, follow these rules:
channel and clock set starts.
VCR CLOCK CHANNEL
•
2) Press to select LIST.
seconds to cancel the Timer Recording.
VOLUME +/-
electrical shorts caused by liquid contact inside.
➛ Press PAUSE/SLOW.
Record
a. Never cover ventilation slots or the unit while
Audio Track:
1 track (Normal)
Record one station, watch another
CHANNEL /
r
• Never drop or push any object through openings in the
6 /08 / 20 0 3 SUN 2 : 20PM
(Adjusts TV volume)
Loading the Batteries
(The TIMER indicator goes out on Multi
ont
in use, or operate the unit when placed on a
• If screen below does not appear, check
unit. Some internal parts carry hazardous voltages and
2 channel (Hi-Fi Audio Sound)
DST : ON
➛ Press PLAY to release.
Press VCR/TV
TIMER PROG. L I ST
Press
to select
TRACKING/ V-LOCK
bed, sofa, rug, or other soft surface.
SETT I NG : CH 10
b DT START STOP CH SPD
contact can cause electric shock or fire hazard.
Tuner:
VCR - TV connection and, if TV is
Function Display.)
(“VCR” goes out on Multi Function Display),
7 9 : 00A 12 : 00A 08 SP
(Selects channel/ reduces
desired program.
b. Avoid built-in installation, such as a book
8 10 : 00P 12 : 00P 02 SP
• Avoid placing the unit directly above or below your TV set
Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69
•
AUTO CLOCK SET
Frame by Frame Picture
tuned to channel 3, try switching it to
picture noise during Play and
V
➛ select channels on TV (recording continues).
10 8 : 00P 9 : 00P 10 SP
case or rack, unless proper ventilation is
Pr
as this may cause electrical interference. Keep all
COMPLETED
SU 9 : 00P 10 : 00P L1 LP
Slow mode)
i
provided.
CABLE Channels:
Midband A ~ I (14 ~ 22)
magnets away from electronic equipment.
channel 4.
➛ Press PAUSE/SLOW in Still mode.
ew of the
CANCEL : ADD / DLT
5
AVOID EXTREMELY HOT LOCATIONS OR
Superband J ~ W (23 ~ 36)
Select channels on VCR (in STOP or
•
5
USING ACCESSORIES
e
• To change VCR’s output channel,
➛ Press PLAY to release.
SELECT : SET :
A
SUDDEN TEMPERATURE CHANGES
v
EXIT : PROG
Remote Control
Hyperband AA ~ EEE
Use only accessories recommended by the manufacturer to
PAUSE mode)
Do not place the unit over or near any kind of
ent
please refer to “VCR’s Output Channel”
If “AUTO CLOCK SET IS INCOMPLETE”
avoid risk of fire, shock, or other hazards.
(37 ~ 64)
Press VCR/TV
uto Opera
Slow Motion Picture
EJECT button: Press to eject tape. EJECT is not available during recording.
heater or radiator, in direct sunlight, inside a
6
CLEANING THE UNIT
Lowband A-5 ~ A-1 (95 ~ 99)
in Advanced Operations book (p. 12).
appears, manually set clock.
closed vehicle, etc.. Do not move the unit
➛ Hold down PAUSE/SLOW in Still mode.
(“VCR” lights up on Multi Function Display),
c To Replace program...
Unplug the unit. Then, use a clean, dry, chemically
Special CABLE channel 5A
T
suddenly between areas of extreme temperature
See below.
➛ select channels on VCR.
TIMER PROG. LIST
untreated cloth to gently remove dust or debris. DO NOT
a
➛ Press PLAY to release.
1) Press to display.
variation. If the unit is suddenly moved from a
(01)
DATE
START
STOP
CH
USE cleaning fluids, aerosols, or forced air that could over-
pe Erasur
VCR CLOCK CHANNEL
VCR)
cold place to a warm place, moisture may
Ultraband 65 ~ 94, 100 ~ 125
7 SUN 9:00A 12:00A 08
2) Repeat Step 2
spray, or seep into the unit and cause electrical shock. Any
Notes
Notes
Notes
TODAY
condense in the unit and on the tape.
Operating
AUTO CLOCK SET IS
SP
substance such as wax, adhesive tape, etc. may mar the
(above) to set new
INCOMPLETE
SELECT START DATE
6
TO AVOID PERSONAL INJURY
cabinet surface. Exposure to greasy, humid, or dusty areas
Temperature:
5 °C ~ 40 °C (41 °F ~ 104 °F)
• These features work best in SP or SLP mode.
• Watching one channel and recording
• Do not place unsecured
tion
programs.
SELECT :
SET:
may adversely affect internal parts.
Operating Humidity: 10 % ~ 75 %
PLEASE SET CLOCK BY
• The sound will be muted.
another is not possible when using Cable
END : PROG
equipment on a sloping
PRESSING ACTION KEY
surface.
SERVICE
Weight:
2.5 kg (5.5 lbs).
• To reduce picture noise, see “Manual
Box or DSS Receiver.
Front View of the VCR
• Do not place this unit on any
1
DO NOT SERVICE THIS PRODUCT YOURSELF
Tracking Control” on p. 3.
Dimensions:
360 (W) x 93 (H) x 242 (D) mm
• After 5 minutes in Pause mode, VCR stops
or
support that is not firm, level,
If, after carefully following the detailed operating instructions,
e
Plugging the AC Power Plug into an AC outlet
14-3/16” (W) x 3-11/16” (H) x
• After VCR is in Still or Slow mode 3 minutes, it
and adequately strong. The
to protect the tape and the video heads.
this Video product does not operate properly, do not attempt
•
To Clear program...
unit could fall causing serious
9-9/16” (D) inch
to open or remove covers, or make any adjustments not
Specif
auto switches to Stop mode to protect the tape
injury to a child or adult and
Battery replacement caution
TIMER PROG. L I ST
described in the manual. Unplug the unit and contact a
and the video heads.
Press ADD/DLT.
DT START STOP CH SPD
damage to the unit.
qualified service technician.
• Do not mix old and new batteries.
Note: Designs and specifications are subject
VCR CLOCK CHANNEL
-- -- : -- -- : -- -- --
Cassette Compartment
STOP/EJECT
• An appliance and cart combination should be
8 10 : 00P 12 : 00P 02 SP
2
IF REPLACEMENT PARTS ARE REQUIRED
• Do not mix alkaline with manganese batteries.
to change without notice.
Manual Clock Set
10 8 : 00P 9 : 00P 10 SP
moved with care. Quick stops, excessive force,
SU 9 : 00P 10 : 00P L1 LP
Make sure the service technician uses only parts specified
and uneven surfaces may cause the appliance
by the manufacturer, or those having the same safety
ica
3 Press STOP to stop tape.
This video recorder, equipped with
CANCEL : ADD / DLT
If Auto Clock Set was incomplete.
and cart combination to overturn.
SELECT : SET :
characteristics as the original parts. The use of unauthorized
Prevent Accidental Tape Erasure
• Carefully follow all operating instructions and
Press REW or FF in Stop mode to
HQ (High Quality) system, is
EXIT : PROG
CH AUTO SET PROCEEDING
POWER
substitutes may result in fire, electric shock, or other
tions
use the manufacturer's recommended
hazards.
1 Press ACTION* on remote to display
Rewind or Fast Forward tape.
compatible with existing VHS
accessories when operating this unit or
Break off the tab to
To record again
Features for a Quality Picture
CANCEL : STOP
connecting it to any other equipment.
3
HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY
CLOCK menu.
prevent recording.
Press EJECT on remote,
equipment. Only use tapes with the
d Press PROG to end the programming.
CHECK
PLAY
or STOP/EJECT on VCR to eject tape.
After any service or repairs to the unit, request the service
Digital Auto Picture
•
VCR CLOCK CHANNEL
mark. Only tapes tested and
Recor
technician to conduct a thorough safety check as described
Automatically controls the video output signal for
VCR CLOCK CHANNEL
inspected for use in 2, 4, 6, and 8
Video
in the manufacture’s service literature to ensure that the
less noise depending on the tape condition.
1 / /
:
video unit is in safe operating condition.
Input
AUTO CLOCK SET
hour machines are recommended.
DST:ON
Safety Precautions
Connector
Digital Auto Tracking
PROCEEDING
SELECT MONTH
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or
Continuously analyzes the signal and adjusts for
d/Playback
Notes
SELECT : SET :
Auto Operation Functions
Audio Input
moisture.
Cover the hole
optimum picture quality.
EXIT : ACT I ON
CHANNEL /
Remote
Record Tab
RECORD REWIND/
FAST
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
CANCEL : STOP
• If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must
Connector
with cellophane
Auto Play
Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas
Manual Tracking Control
be set to the Cable Box output channel and your Cable Box must be manually set to
(L/R)
TRACKING/ V-LOCK
Sensor
SEARCH
FORWARD/
tape.
If you use a cable box, turn it on and set it
2 Press to select the month and
exposer cet appareil à la pluie ou à une humidité excessive.
(to reduce picture noise)
SEARCH
Screw driver
Insert a tape ➛ Power comes on ➛ Play starts if there is no record tab (see p. 3).
the desired channel. The Cable Box must be left on.
to the Public Broadcasting Station (PBS)
to set. In the same manner, select and
Attention: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche
Use during Playback and Slow Motion mode to
set the date, year, time, and DST
Auto Rewind
• If a power interruption occurs while programming the timer, the timer program(s) may be
Multi Function Display
channel in your time zone. If you use a
dans la borne correspondante de la prise et pousser jusqu’au fond.
Record/Playback Time
reduce picture noise.
(Daylight Saving Time).
Play
canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears
Press CH (TRACKING) / on the remote
DSS receiver, it must be turned off.
T
➛ Tape end ➛ Rewind
on-screen, please re-enter the timer programs.
This symbol warns the user that uninsulated
ime
Fast Forward
Only use tapes with the
mark in this unit.
control or on the VCR until the picture clears up.
VCR CLOCK CHANNEL
CAUTION
voltage within the unit may have sufficient
To return to Auto Tracking, press POWER off,
Notes
Play Auto Eject
RISK OF ELECTRIC SHOCK
magnitude to cause electric shock. Therefore,
DO NOT OPEN
Type of Video Cassette
then on again a few seconds later.
6 /08 / 20 0 3
• Function buttons are inoperative during Initial
SUN 2 : 20PM
(Repeat Play must be off)
it is dangerous to make any kind of contact
Tape Speed
DST:ON
Important notes when using DSS receiver
with any inside part of this unit.
Setup.
Play
Setting
T60
T120
T160
➛ Tape end ➛ Rewind ➛ Tape ejects if there is no record tab
SET COMPLETED
• To remove a cassette during Auto Set, press
• When recording programs via DSS receiver, DSS receiver must be left on.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
This symbol alerts the user that important
SP
2 Hours
EJECT on the remote or STOP twice on the
SET
:
• When recording programs via an antenna or cable, DSS receiver must be turned off.
DO NOT REMOVE COVER (OR BACK)
literature concerning the operation and
1 Hour
2 Hours
START
: ACT I ON
(Standard Play)
40 Minutes
VCR. In this case, settings must be made
R
R
maintenance of this unit has been included.
R
R
R
R
NO USER-SERVICEABLE PARTS INSIDE
manually. (See p. 12 of Advanced Operations
R
R
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
Therefore, it should be read carefully in order
LP
5 Hours
book.)
3 Press ACTION to start clock and exit.
to avoid any problems.
2 Hours 4 Hours
*Important: If a remote control button does not work when pressed,
*Important: If a remote control button does not work when pressed,
(Long Play)
20 Minutes
V-Lock Control (to reduce picture jitter)
• Depending on conditions, Auto Clock Set may
press the VCR button on the remote and try the button again.
press the VCR button on the remote and try the button again.
SLP
In Still mode, CH (TRACKING) / operate as a
take longer than 30 minutes. If so, press
3 Hours 6 Hours
8 Hours
FCC Warning: Any unauthorized changes or modifications to this equipment would void the
(Super Long Play)
V-Lock control.
STOP to stop setup and perform settings
user’s authority to operate.
manually. (See p. 12 of Advanced Operations
- 2 -
- 3 -
book.)
- 4 -
- 5 -
- 6 -
- 7 -
V4523S Basic-2 (021219).p65
3
2003/01/08, 17:03
LSQT0631A (Basic Operations) - Back
...