Votes - 5, Average rating: 4
(
)
)
|
manual abstract
• Refer to “Index to parts and controls” for button locations. Turn on your TV and set it to the video channel. If no picture or sound is reproduced on the TV, press TV/VIDEO on the remorte commander to display VIDEO indicator on the display window. 2 Insert a tape with its safety tab in place. • PROG 3 • To record a normal channel, press PROG +/– until the programme position number or station name you want appears in the display window. INPUT SELECT • To record from other equipment connected to one or more of the LINE inputs, press INPUT SELECT to display the connected line in the display window. REC Press zREC to start recording. The recording indicator lights up red in the display window. Recording indicator continued Recording TV programmes (continued) To stop recording Press x STOP. To check the remaining time Press DISPLAY. Each time you press DISPLAY, the display changes as shown below. Sound system, TV system, colour system, programme position, tape speed and time counter t Remaining time t Current date and time, and time counter In order to get an accurate remaining time indication, be sure TAPE SELECT in the USER SET menu is set according to the tape type you use. To watch another TV programme while recording 1 If the TV is connected to the VCR using an audio/video cable, set the TV to TV input. If the TV is connected to the VCR using only the aerial cable, skip this step. 2 Select another programme position on the TV. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on the same tape again, cover the tab hole with adhesive tape. Safety tab Recording TV programmes using the Easy Timer (SLV-ED949SG only) The Easy Timer function allows you to make timer recordings of programmes without turning on your TV. Set the recording timer to record up to eight programmes, including settings made with other timer methods, that will be broadcast within the next month. The EASY TIMER X PAUSE recording start time and recording stop time can be set at one minute intervals. Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Refer to “Index to parts and controls” for button locations. ?/1 ON/STANDBYPROGRAM +/– x STOP 1 EASY TIMER Press EASY TIMER. “DATE” and “TODAY” appear alternately in the display window. If the date and time are not set, “DAY” will appear. See step 2 in the following section, “To set the clock” to set the date and time. n 2 EASY TIMER Turn EASY TIMER to set the recording date. continued Recording TV programmes using the Easy Timer (SLV-ED949SG only) (continued) 3 EASY TIMER Press EASY TIMER. START indicator and the current time appear in the display window. 4 EASY TIMER Turn EASY TIMER to set the recording start time. You can set the recording start time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. PROGRAM 5 EASY TIMER Press EASY TIMER. STOP indicator and the recording stop time appear in the display window. 6 EASY TIMER Turn EASY TIMER to set the recording stop time. You can set the recording stop time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. PROGRAM EASY TIMER Press EASY TIMER. The programme position or LINE input appears in the display window. EASY TIMER Turn EASY TIMER to set the programme position. INPUT SELECT To record from other equipment connected to one or more of the LINE inputs, turn EASY TIMER or press INPUT SELECT to display the connected line in the display window. EASY TIMER Press EASY TIMER. The current tape speed mode appears in the display window. 10 EASY TIMER Turn EASY TIMER to set the tape speed, SP, LP or AUTO. continued Recording TV programmes using the Easy Timer (SLV-ED949SG only) (continued) 11 EASY TIMER Press EASY TIMER to complete the setting. “OK” appears in the display window for about five seconds. The indicator appears in the display window and the VCR stands by for recording. To record from other equipment, leave the connected equipment switched on. To return to the previous step To return to the previous step, press the PROGRAM + and – buttons on the VCR at the same time during any of the Easy Timer settings. To stop recording To stop the VCR while recording, press x STOP. To use the VCR after setting the timer To use the VCR before a recording begins, just press ?/1 . The indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter. • Display tape information on the TV screen (page 18). • Check the timer settings. • Watch another TV programme (page 18). To use the Auto Tape Speed function In step 10 above, turn EASY TIMER to select AUTO. When you are recording a programme in the SP mode and the remaining tape length becomes shorter than the recording time, the recording...
Other models in this manual:Tape Players - SLV-ED343SG (259.03 kb)