Votes - 2, Average rating: 3.5
(
)
)
|
Other manuals for this model:
Tape Players - SLV-SE740E (828.74 kb)
Tape Players - SLV-SE740E (829.92 kb)
manual abstract
You can preset a total of eight programmes, including settings made with other timer methods. Before you start… • Check that the VCR clock is set to the correct time and date. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • To record from a decoder, turn it on. • Turn on your TV and set it to the video channel. • Set TIMER METHOD to SHOWVIEW or VARIABLE in the EASY OPERATION menu (see page 72). • Refer to “Index to parts and controls” for button locations. 1 TIMER OK Press TIMER. • When you set TIMER METHOD to VARIABLE: The TIMER METHOD menu appears on the TV screen. Press M/m to select SHOWVIEW, then press OK. • When you set TIMER METHOD to SHOWVIEW: The SHOWVIEW menu appears on the TV screen. : OKSET SELECT TIMER METHOD STANDARD SHOWVIEW : EXIT : MENU : OKSET CODE 0 – 9 SHOWVIEW CODE ––––––––– : EXIT : MENU Recording TV programmes using the ShowView® system (not available on SLV-SE640D/E and SE240D) 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 Press the programme number 2 buttons to enter the ShowView number. If you make a mistake, press CLEAR and re-enter the correct number. SHOWVIEW CODE 1234––––– CODE :0–9 SET : OK EXIT : MENU CLEAR OK Press OK. PR DAY START STOP V/P The date, start and stop times, 35 SA29 19 :00 20:00 SP – –– –––– –– :–– –– :–– – – programme position, tape speed and –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – VPS/PDC setting appear on the TV –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – screen. –– –––– –– :–– –– :–– – – INPUT SELECT –– –––– –– :–– –– :–– – – • If “– –” appears in the “PR” SELECT : SET : END : OK EXIT : MENU (programme) column (this may happen for local broadcasts), you CLEAR have to set the appropriate programme position manually. Press M/m to select the desired programme position. • To record from a decoder or other source connected to one or more of the LINE inputs, press INPUT SELECT to display the connected line in the “PR” position. You will only have to do this operation once for the referred channel. The VCR will then store your setting. If the information is incorrect, press CLEAR to cancel the setting. Basic Operations OK If you want to change the date, tape PR DAY START STOP V/P speed and the VPS/PDC setting: 35 SA29 19 :00 20:00 SP ON –– –––– –– :–– –– :–– – – 1 Press Other models in this manual:
Tape Players - SLV-SE240D (811.81 kb)
Tape Players - SLV-SE640D (811.79 kb)
Tape Players - SLV-SE640E (811.79 kb)
Tape Players - SLV-SE740D (811.79 kb)