Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
The disabled positions will be skipped later when you press the PROG +/-buttons. 1 In step 7 above, press programme number button "0" twice to display the number "00" beside CHANNEL SET. 2 Press MENU to exit the menu. If the picture is not clear Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, however, the picture is not clear, you may also use the manual tuning function. 1 Press PROG +/- or the programme number buttons to select the programme position for which you cannot obtain a clear picture. 2 Press MENU, then select SETTINGS and press OK. 3 Select TUNER, then press OK. 4 Select FINE TUNING, then press OK. The fine tuning meter appears. Selected programme position NORMAL/CATV CHANNEL SET AFT_ I FINE TUNING NORMAL C2 7 SET EXIT : IMENUI 5 Press ? / / to get a clearer picture, then press MENU to exit the menu. Note that the AFT (Auto Fine Tuning) setting switches to OFF. Tip • If you want to return to the previous menu, highlight RETURN and press OK. Note • The menu disappears automatically if you don't proceed for more than a few minutes. Getting Started Getting Started Changing/ disabling programme positions After setting the channels, you can change the programme positions and the station names as you like. If any programme positions are unused or contain unwanted channels, you can disable them. Changing programme positions Before you start. • Turn on the VCR and the TV. • Set the TV to the video channel. 1 Press MENU, then press >/. to highlight LISTS and press OK. 2 Press >/. to highlight CHANNEL LIST, then press OK. CH 1 I C12 2 C03 3 C5 6 4 C2 7 5 C0 9 SELECT S+l MOVE PROG I*T ERASE PROG : I CLEAR I 3 Press to highlight the row on which you want to change the programme position, then press /. To display other pages for programme positions 6 to 60, press > /. repeatedly. rig CHANNEL LIST | 2 C03 3 C56 4 C2 7 5 C0 9 NAME CDE FGH SELECT : SET STATION NAME : CONFIRM : ^ EXIT : IMENUl MENU CHANNEL LISI PROG NAME AAB CDE FGH EXIT : iMENUl 22 Getting Started 4 Press >/. until the selected channel row moves to the desired programme position. The selected channel is inserted at the new programme position and the intermediate channels are displaced to fill the gap. 5 Press OK to confirm the setting. IPROG CH NAME 1 C0 3 CDE 2 C5 6_ CHANNEL LIST C27 C0 9 -GH SELECT SET STATION NAME CONFIRM EXIT : IMENUI 6 To change the programme position of another station, repeat steps 3 to 5. 7 O Press MENU to exit the menu. Tip • If you want to return to the previous menu, highlight RETURN and press OK. Note • The menu disappears automatically if you don't proceed for more than a few minutes. continued Getting Started 23 Getting Started Changing/disabling programme positions (continued) Changing the station names You can change the station names (up to 5 characters). Before you start. • Turn on the VCR and the TV. • Set the TV to the video channel. 1 Press MENU, then press >/. to highlight LISTS and press OK. EXIT : iMENUl 2 Press >/. to highlight CHANNEL LIST, then press OK. 2 C03 CDE 3 C56 4 C2 7 5 C0 9 FGH SELECT :|+5 MOVEPRG :S~ ERASE PROG : CLEAR 3 Press to highlight the row on which you want to change the station name, then press /. To display other pages for programme positions 6 to 60, press > /. repeatedly. 2 C03 CDE 3 C56 4 C2 7 5 C0 9 FGH SELECT : g+| SET STATION NAME : ST CONFIRM OK EXIT : IMENUl MENU TIMER LIST ^RETURN SELEC! :|+* set : Iok CHANNEL LIST PROG CH NAME C1 2 AAB EXIT : IMENUl CHANNEL LIST PROG CH NAME 24 Getting Started 2 C0 3 CDE 3 C5 6 4 C2 7 5 C0 9 FGH CHANNEL LIST PROG CH NAME C1 2 SELECT A CHARACTER NEXT CONFIRM EXIT : iMENUl 5 Enter the station name. 1 Press to select a character. Each time you press >, the character changes as shown below. A n B n ... n Z n a n b n ... n z n 0 n 1 n ... n 9 n (symbols) —► (blank space) —► A 2 C0 3 CDE 3 C5 6 4 C2 7 5 C0 9 FGH CHANNEL LIST PROG CH NAME C1 2 SELECT A CHARACTER NEXT CONFIRM EXIT : IMENUl 2 Press / to set the next character. The next space is highlighted. To correct a character, press ? / / until the character you want to correct is highlighted, then reset it. You can set up to 5 characters for the station name. 6 Press OK to confirm the new name. 7 O Press MENU to exit the menu. Tip • If you want to return to the previous menu, highlight RETURN and press OK. Note • The menu disappears automatically if you don't proceed for more than a few minutes. continued Getting Started 25 Getting Started Changing/disabling programme positions (continued) Disabling unwanted programme positions After presetting channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/-buttons. Before you start. • Turn on the VCR and the TV. • Set the TV to the video channel. '1 J ' ...