Votes - 3, Average rating: 3.3
(
)
)
|
manual abstract
Manufacturer Code number Manufacturer Code number Sony 01*1, 02 Panasonic 17*1, 49 Akai 68 Philips 06*1, 07*1, 08*1 Ferguson 52 Saba 12, 13 Grundig 10*1, 11*1 Samsung 22, 23 Hitachi 24 Sanyo 25 JVC 33 Sharp 29 Loewe 45 Telefunken 36 Mivar 09, 70 Thomson 43*2 NEC 66 Toshiba 38 Nokia 15, 16, 69*3 *1 Press WIDE to switch the wide picture mode on or off. *2 Press WIDE, then press c +/– to select the wide picture mode you want. *3 Press WIDE. The menu appears on the TV screen. Then, press >/./?//to select the wide picture you want and press OK. Notes • If the TV uses a different remote control system from the one programmed to work with the VCR, you cannot control your TV with the remote commander. • If you enter a new code number, the code number previously entered will be erased. • When you replace the batteries of the remote commander, the code number may change. Set the appropriate code number every time you replace the batteries. Getting Started Step 3 Step 3 Connecting the VCR If your TV has a EURO-AV connector, see page 10. If your TV does not have a EURO-AV (Scart) connector : Signal flow AERIAL IN Aerial cable (supplied) AERIAL IN AERIAL OUT to mains Mains lead Disconnect the aerial cable from your TV AERIAL ANTENNE panel of the VCR. IN and connect it to AERIAL IN on the rear ENTREE OUT SORTIE AERIAL ANTENNE Connect AERIAL OUT of the VCR and IN ENTREE the aerial input of your TV using the supplied aerial cable. OUT SORTIE Connect the mains lead to the mains. Getting Note • When you connect the VCR and your TV only with an aerial cable, you have to set RF MODULATOR in the OPTIONS-2 menu to ON (initial setting) (see page 57). continued Getting Started 9 Step 3 : Connecting the VCR (continued) If your TV has a EURO-AV (Scart) connector : Signal flow AERIAL IN Aerial cable (supplied) AERIAL IN AERIAL OUT to mains EURO-AV cable (not supplied) EURO-AV (Scart) Mains lead :LINE-1 (TV) 1 Disconnect the aerial cable from your TV and connect it to AERIAL IN on the rear panel of the VCR. IN ENTREE OUT SORTIE AERIAL ANTENNE 2 AERIAL ANTENNE Connect AERIAL OUT of the VCR and ENTREE the aerial input of your TV using the IN supplied aerial cable. OUT SORTIE Getting Started Connect LINE-1 (TV) on the VCR and the EURO-AV (Scart) connector on the TV with the optional EURO-AV cable. This connection improves picture and sound quality. Whenever you want to watch the VCR picture, press ETV/ VIDEO to display the VIDEO indicator in the display window. Connect the mains lead to the mains. Note • If the TV is connected to the LINE-1 (TV) connector, setting the RF MODULATOR in the OPTIONS-2 menu to OFF is recommended. In the OFF position, only the signal from the aerial is output through the AERIAL OUT connector (see page 57). You do not have to tune your TV to the VCR. Skip “Tuning your TV to the VCR” on page 14. continued Getting Getting Started 11 Step 3 : Connecting the VCR (continued) About the SMARTLINK features (SLV-SE50EE only) If the connected TV complies with SMARTLINK, SMARTLINK MEGALOGIC*1, EASYLINK*2, Q-Link*3, or EURO VIEW LINK*4, you can use the SMARTLINK function after you complete the steps on the previous page (the SMARTLINK indicator appears in the VCR’s display window when you turn on the TV). You can enjoy the following SMARTLINK features. • Preset Download You can download your TV tuner preset data to this VCR and tune the VCR according to that data in Auto Set Up. This greatly simplifies the Auto Set Up procedure. Be careful, not to disconnect the cables or exit the Auto Set Up function during the procedure. See “Setting up the VCR with the Auto Set Up function” on page 16. • TV Direct Rec You can easily record what you are watching on the TV (other than tapes being played on this VCR). For details, see “Recording what you are watching on the TV (TV Direct Rec)” on page 38. • One Touch Play With One Touch Play, you can start playback automatically without turning on the TV. For details, see “Starting playback automatically with one button (One Touch Play)” on page 33. • One Touch Menu You can turn on the VCR and TV, set the TV to the video channel, and display the VCR’s on-screen display automatically by pressing MENU on the remote commander. • One Touch Timer You can turn on the VCR and TV, set the TV to the video channel, and display the TIMER menu automatically by pressing TIMER on the remote commander. • Automatic Power Off You can have the VCR turn off automatically, if the VCR is not used after you turn off the TV. *1 “MEGALOGIC” is a registered trademark of Grundig Corporation. *2 “EASYLINK” is a trademark of Philips Corporation. *3 “Q-Link” is a trademark of Panasonic Corporation. *4 “EURO VIEW LINK” is a trademark of Toshiba Corporation. Note • Not all the TVs respond to the functions above. Getting Started Additional connections This additional connection improves picture and sound quality. If your TV has LINE IN connector, connect your TV by using audio/video cable as shown on the right. Whenever ...
Other models in this manual:Tape Players - SLV-SE70EE (600.31 kb)