Manafacture: Sony
File size: 714.85 kb
File name: 3090243111.pdf
|
manual abstract
The next space flashes. To correct a character, press , until the character you want to correct flashes, then reset it. You can set up to 4 characters for the station name. Getting Started 6 OK PLAY Press OK to confirm the new name. MENU Press MENU to exit the menu. Getting Started Basic Operations Playing a tape Before you start... • Refer to “Index to parts and controls” for button locations. 1 Turn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. 3 OK PLAY Press H PLAY. When the tape reaches the end, it will rewind automatically. Additional tasks To Press Stop play x STOP Pause play X PAUSE Resume play after pause X PAUSE or H PLAY Fast-forward the tape M FF during stop Rewind the tape m REW during stop Eject the tape Z EJECT To set the colour system If the playback picture has no colour, or streaks appear during playback, set COLOUR SYSTEM in the USER SET menu to conform to the system that the tape was recorded in (see page 56). (Normally set the option to AUTO.) Basic Operations Using Playback Dial on the VCR Playback Dial With Playback Dial, you can operate the following playback options. To Do this Resume play after pause Press H PLAY Fast-forward the tape Quickly turn and release Playback Dial to the right (M FF) during stop Rewind the tape Quickly turn and release Playback Dial to the left (m REW) during stop To use the time counter Press CLEAR at the point on the tape that you want to find later. The counter in the display window resets to “0:00:00.” Search for the point afterwards by referring to the counter. Basic Operations Hour Minute Second To display the counter on the TV screen, press DISPLAY. Notes • When you play back a tape recorded in the PAL or MESECAM colour system, streaks may appear even if the colour system setting is set to AUTO. If so, set COLOUR SYSTEM to PAL or MESECAM in the USER SET menu (see page 56). • Do not turn Playback Dial forcibly. It may damage Playback Dial. • The counter resets to “0:00:00” whenever a tape is reinserted. • The counter stops counting when it comes to a portion with no recording. • If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will not be correct. This discrepancy is due to the difference between the counting cycles of the two colour systems. • Depending on your TV, the following may occur while playing an NTSC-recorded tape: – The picture becomes black and white. – The picture shakes. – No picture appears on the TV screen. – Black streaks appear horizontally on the TV screen. – The colour density increases or decreases. • Tapes recorded in the LP mode of other NTSC system VCRs can be played back on this VCR, but the picture quality cannot be guaranteed. • While setting the menu on the TV screen, buttons for playback on the remote commander do not function. Basic Operations Recording TV programmes Before you start... • Refer to “Index to parts and controls” for button locations. 1 Turn on your TV and set it to the video channel. If no picture or sound is reproduced on the TV, press TV/VIDEO on the remote commander to display VIDEO indicator on the display window. 2 Insert a tape with its safety tab in place. 3 • PROG • To record a normal channel, press PROG +/– until the programme position number or station name you want appears in the display window. INPUT SELECT • To record from other equipment connected to one or more of the LINE inputs, press INPUT SELECT to display the connected line in the display window. 4 REC SPEED Press REC SPEED to select the tape speed (SP or LP for the PAL colour system, and SP or EP for the NTSC colour system). LP (Long Play) provides recording time twice as long as SP (Standard Play). EP (Extended Play) provides recording time three times as long as SP. However, SP produces better picture and audio quality. Basic Operations REC Press zREC to start recording. The recording indicator lights up red in the display window. Recording indicator To stop recording Press x STOP. To check the remaining time Press DISPLAY. Each time you press DISPLAY, the display changes as shown below. Sound system, TV system, colour system, programme position, tape speed and time counter t Remaining time t Current date and time, and time counter Sound system, TV system and colour system Basic Operations Current date and time STEREO PR 1 SP PAL AUTO 21 / J UN 12 : 00 Programme position Tape speed Time counter 09: 0REMAIN Remaining time In order to get an accurate remaining time indication, be sure TAPE SELECT in the USER SET menu is set according to the tape type you use (see page 56). continued Basic Operations Recording TV programmes (continued) To watch another TV programme while recording 1 If the TV is connected to the VCR using an audio/video cable, set the TV to TV input. If the TV is connected to the VCR using only the aerial cable, skip this step. 2 Select another programme position on ...
Other models in this manual:Tape Players - SLV-ED343SG (714.83 kb)
Tape Players - SLV-ED949ME (714.83 kb)
Tape Players - SLV-ED949SG (714.83 kb)
- ()