Votes - 3, Average rating: 3.3
(
)
)
|
manual abstract
To maintain better PAL / MESECAM • AUTO PAL MESECAMpicture quality, we recommend that you set APC to NTSC PB •ON PAL TV 4. 43 3. 58 ON in the SET UP MENU (with the APC indicator SELECT : [ ] SET :[ ] in the display window lit). APC playback The APC function automatically works on all types of tapes, including rental tapes and tapes that were not recorded with APC. APC recording Whenever you insert a tape and first start recording, the VCR adjusts the tape using the APC function (the APC indicator flashes rapidly). This adjustment is retained until the tape is ejected. To deactivate the APC function Press MENU and select SET UP MENU, then set APC to OFF. The APC indicator in the display window goes off. continued Additional Operations Adjusting the picture (continued) Tip • To set the tracking to the centre position, press the TRACKING + and – buttons at the same time. Note • There is a delay of a few seconds before the VCR actually starts recording while the VCR analyses the tape. To avoid the delay, first set the VCR to recording pause (the APC indicator flashes slowly) and press z REC to have the VCR analyse the tape (the APC indicator flashes rapidly). After the APC indicator stops flashing, press X PAUSE to start recording immediately. If you press X PAUSE before the APC indicator stops flashing, the APC function is cancelled. Additional Operations Changing menu options 1 Press MENU, then select SET UP MENU. SET UP MENU AUDIO MIX APC PAL / MESECAM NTSC PB PALAUTO MESECAM SELECT SET •ON OFF • • ON PAL TV 4. 43 3. 58 • ON OFF : [ ] : [ ] 2 Press M/m to select the option to change, then press Other models in this manual:
Tape Players - SLV-ED85PS (803.66 kb)
Tape Players - SLV-ED85TH (803.66 kb)