Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
You can preset up to eight programmes at a time. Before you start… • Check that the VCR clock is set to the correct time. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Turn on your TV and set it to the video channel. 1 2 3 4 5 6 7 8 9 0 ?/1 CLEAR G-CODE Programme number buttons SP/LP (SP/EP) OK M/m//. to extend the stop time. Each press increases or decreases the stop time by five minutes up to one hour. Press OK to confirm the stop time. If the information is not correct, press CLEAR to cancel the setting. 5 To enter another setting, repeat steps 1 to 4. 6 Press ?/1 to turn off the VCR. • ]/1 The t indicator appears in the display window and the VCR stands by for recording. Basic Operations To stop recording To stop the VCR while recording, press p STOP. To record satellite broadcasts When you connect the satellite tuner and the VCR, you can record satellite programmes using the G-CODE number if applicable. 1 Turn on the satellite tuner. 2 On the satellite tuner, select the satellite programme for which you wish to make a timer setting. 3 Repeat the steps described on page 43 and page 44. 4 Keep the satellite tuner turned on until the VCR finishes recording the satellite programme for which you have made a timer setting. Tip • To cancel the procedure, press G-CODE before pressing OK. Note • The t indicator flashes in the display window when you press ?/1 with no tape inserted. Basic Operations Basic Operations Setting the timer manually You can preset up to eight programmes at a time. Before you start… • Check that the VCR clock is set to the correct time. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Turn on your TV and set it to the video channel. 1 1 2 3 4 5 6 7 8 9 0 ?/1 PROG +/– INPUT SELECT MENU OK M/m/Other models in this manual:
Tape Players - SLV-EZ77AS (1021.64 kb)
Tape Players - SLV-EZ77NZ (1021.64 kb)