Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
8, 17). □ TV and VCR are plugged in. □ TV is on and tuned to CH3, 4, or VIDEO. □ Remote is in VCR mode. (Press VCR) 1 Insert a tape, * VCR power comes on. "VCR” lights on Multi Function Display. Press PLAY* to play tape. • If tape has no rec. tab (pg. 4), auto play begins. Special Features During Play Playback using VCR controls 1 Insert a cassette. 2 Press PLAY. Multi Function Display Press STOP/EJECT to stop and/ or eject tape. Forward/ Reverse scene search --> Press FF or REW. --> Press again or PLAY to release. Still (Freeze) picture -> Press PAUSE/SLOW. --> Press PLAY to release. Frame by Frame picture --> Press PAUSE/SLOW in Still mode. --> Press PLAY to release. Slow Motion picture ~> Hold down PAUSE/SLOW in Still mode. --> Press PLAY to release. These features work best in SP or SLP mode. • The sound will be muted. • To reduce picture noise, see “Manual Tracking Control” on page 25. • After the VCR is in Still or Slow mode for 3 minutes, it will switch to Stop mode automatically to protect the tape and the _video head._ 3 Press STOP to stop tape. ■ Press REW or FF In Stop mode to Rewind/ Fast Forward tape. I Press EJECT on remote, or STOP/EJECT on VCR to eject tape. Remove loose or peeling labels from tapes to prevent tape jam. 12 For assistance, please call : 1-800-211 -PANA(7262) or send e-mail to : consumerproducts@panasonic.com Record On a Tape 'Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. VCR/ TV SPEEDi FWg* _ oarucr Q о -öooo бо©0 SOOCD / t*tr tma o©oo СЖШС 1№Л№ О (£уо /д~у\ ^ « (ф>| £ <3tô| REC о_„ к*по« сосити--- €ОО0 STOP Model VHQ-451 remote shown. Record using VCR controls 2 Select 1 Insert 4 Press REC Channel, a cassette, to start \ | Recording. VCR/TV Multi Function Display 5 Press STOP/EJECT to stop. This video recorder, equipped with HQ {High Quality) system, is compatible with existing VHS equipment. Only use tapes with the ICTK1 mark. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended. h/Ready Check List □ All connections are made (pg. 8, 17). □ TV and VCR are plugged in. □ TV is on and tuned to CH3, 4, or VIDEO. □ Remote is in VCR mode. (Press VCR) 1 Insert tape with rec. tab (pg. 4). • VCR power comes on. "VCR" lights on Multi Function Display. 2 Press CH AT, or number keys to select channel. • For “LINE" input, see pg. 24. • For channels over 100, press 100 key then press the remaining 2 digits. 3 Press SPEED to select record speed (pg. 4). SP = Standard Play LP = Long Play SLP = Super Long Play • Speed appears on-screen. 4 Press REC to start record. • To edit out unwanted scenes, press PAUSE/ SLOW to pause, and again to resume recording. 5 Press STOP to stop record. | One Touch Recording (record in progress), • VCR shuts off after preset record length. ~> each press of REC adds 30 min. to record length up to 4 hours. ^ Record one station, watch another, --> press VCR/TV (“VCR" goes out on Multi Function Display), —> select channels at TV (recording continues). • Watching one channel and recording another is NOT possible when using a Cable Box or a Satellite Receiver. ^ Select channels at VCR, • Other channels cannot be viewed during recording. —> press VCR/TV (“VCR” lights on Multi Function Display), --> select channels at VCR. After 5 min. in Pause mode, VCR stops to protect tape and video head. 13 Basic Operation 1>XI VCR/ TV hSoocd POWER SELECT/ SET A:PLAY T:STOP