Votes - 2, Average rating: 4
(
)
)
|
manual abstract
OTHER SETTINGS correctly, to protect the internal hard disk. When dropping is detected, appears. OFF ( ) Deactivates the drop sensor. .DEMO MODE Notes When your camcorder is connected to a . . Set the drop sensor to [ON] when you use wall outlet (wall socket), a demonstration the camcorder. Otherwise, if you drop the movie appear about 10 minutes after the camcorder, you may damage the internal hard (Movie) icon appears by pressing MODE. disk. In a non-gravity situation, the drop sensor . .ON The demonstration appears. activates. When you record images during an activity such as roller-coasting or skydiving, you can set [DROP SENSOR] to [OFF] so as not to OFF activate the drop sensor. The demonstration does not appear. Tips When you set this item to [ON] and select , the demonstration starts playing. The demonstration will be suspended: . . . . . . . When you press START/STOP When you operate the multi-selector during the demonstration (The demonstration starts again after about 10 minutes) When you press MODE When you press (VIEW IMAGES) Customizing camcorder GB 9 Additional information Troubleshooting Additional information Troubleshooting camcorder, follow the steps below. . . Connecting to a Computer............................p. 74 Examples of functions that cannot be used simultaneously................................................. p. 75 . Check the list (p. 70 to 78), and inspect your camcorder. Overall operations . Disconnect the power source, attach The power does not turn on. the power source again after about 1 . . Attach a charged battery pack to the camcorder (p. 11). The plug of the AC Adaptor has been disconnected from the wall outlet (wall minute, and turn the camcorder on. . Press RESET (p. 90, 91) using a pointed object, and turn the socket). Connect it to the wall outlet (wall socket) (p. 11). camcorder on. If you press RESET, all settings, The camcorder does not operate even including the clock setting, are reset. when the power is set to on. It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. This is not a malfunction. Disconnect the AC Adaptor from the wall . . . Contact your Sony dealer or local authorized Sony service facility. Your camcorder may be required to initialize or . change the current internal recording media of your camcorder, depending on the problem. In the event of this, the data stored on the internal recording media will be deleted. Be sure to save the data on the internal recording media on other media (backup) before sending your camcorder for repair. We will not compensate outlet (wall socket) or remove the battery pack, then reconnect it after about 1 minute. If the functions still do not work, press RESET (p. 90, 91) using a pointed object. (If you press RESET, all settings, including the clock setting, are reset.) The temperature of your camcorder is . you for any loss of internal recording media extremely high. Turn off your camcorder and data. leave it for a while in a cool place. During repair, we may check a minimum . . The temperature of your camcorder is amount of data stored on the internal recording media in order to investigate the problem. However, your Sony dealer will neither copy nor retain your data. Overall operations .......................................... p. 70 Batteries/power sources ................................ p. 71 LCD screen ...................................................... p. 71 Memory card ................................................... p. 72 Recording.........................................................p. 72 extremely low. Leave your camcorder with the power of your camcorder on. Turn off your camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on your camcorder. The menu settings have changed automatically. . The following menu items return to the . . . . . . . Playback ........................................................... p. 73 default settings in more than 12 hours after Playing back images stored on memory card on you close the LCD screen. other devices....................................................p. 74 . . . [SCENE SELECTION] [WHITE BAL.] [EXPOSURE] Editing movies/photos on your camcorder.p. 74 Dubbing/Connecting to other devices......... p. 74 . . GB 70 . . . .. [FOCUS] correctly (p. 11). If the problem persists, [BLT-IN ZOOM MIC] disconnect the AC Adaptor from the wall [MICREF LEVEL] outlet (wall socket) and contact your Sony [DROP SENSOR] (DCR-SR15E/SR20E) dealer. The battery pack may be damaged. Backlight The following menu items return to the The remaining battery time indicator does default settings when you switch between not indicate the correct time. . movie recording and photo recording and The ambient temperature is too high or too . playback modes. low. This is not a malfunction. . . . [ FADER] [TELE MACRO] [ SELF-TIMER] Your camcorder gets warm. The battery pack has not been charged enough. Fully charge the b...
Other models in this manual:Cameras - DCR-SX15E (3.93 mb)
Cameras - DCR-SX20E (3.93 mb)
Cameras - DCR-SR15E (3.93 mb)