Votes - 3, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
This is not a malfunction. Because of the way the image device (CMOS sensor) reads out image signals, the subjects passing by the lens rapidly might appear crooked depending on the recording conditions. Horizontal stripes appear on the images. . This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. This is not a malfunction. Black bands appear when you record a TV screen or computer screen. . Set [ STEADYSHOT] to an option except for [ACTIVE] (p. 71). [LCD BL LEVEL] cannot be adjusted. . You cannot adjust [LCD BL LEVEL] when: .The LCD panel is closed on your camcorder with the LCD screen facing out. .The power is supplied from the AC Adaptor. Magnification changes when the recording mode is switched. . You cannot use digital zoom when your camcorder is in the photo recording mode. Sound is not recorded correctly. . If you disconnect an external microphone, etc. during recording movies, sound may not be recorded correctly. . Connect the microphone again in the same way as when you start recording movies. Playback Images cannot be played back. . Select the type of recording media you want to play back (p. 17). . Select the image quality of the movie you want to play back (p. 25). . Images recorded on other devices may not be played back. This is not a malfunction. Photos cannot be played back. . Photos cannot be played back if you have modified files or folders, or have edited the data on a computer. (The file name flashes in that case.) This is not a malfunction. is indicated on an image on the VISUAL INDEX screen. . This may appear on an image recorded on other devices, edited on a computer, etc. . You removed the AC Adaptor or the battery pack while the recording media icon at the top right corner of the screen flashes, or before the access lamp is turned off after recording. This may damage your image data and is displayed. is indicated on an image on the VISUAL INDEX screen. . The image data base file may be damaged. Check the data base file by touching (MENU) . [Show others] . [REPAIR IMG.DB F.] (under [MANAGE MEDIA] category) . the recording medium. If it still appears, delete the image with (p. 39). No sound or only a quiet sound is heard during playback. . Turn up the volume (p. 30). GB Additional . . . When you record sound with [MICREF LEVEL] (p. 73) set to [LOW], the recorded sound may be difficult to hear. . Sounds cannot be recorded while shooting with [SMTH SLW REC] or [GOLF SHOT]. The demonstration movies cannot be played. (HDR-CX350E/CX350VE/CX370E/ XR350E/XR350VE) . Select the internal recording media for the recording media, and the high definition image quality (HD). . The demonstration movie is deleted. A movie is played back automatically. . Movies play automatically as a demonstration movie when the filmed movie fulfills a certain condition on your camcorder (p. 83). This is not a malfunction. Playing back images stored on memory card on other devices Images cannot be played back or the memory card is not recognized. . The playback device does not support playing back memory cards (p. 3). Editing movies/photos on your camcorder Unable to edit. . Unable to edit because of the condition of the image. Movies cannot be added in the Playlist. . There is no free space in the recording media. . You can add no more than 999 high definition image quality (HD) movies, or 99 standard definition image quality (STD) movies, to a GB Playlist. Erase unnecessary movies from the Playlist (p. 46). . You cannot add photos in the Playlist. A movie cannot be divided. . A movie that is too short cannot be divided. . A protected movie cannot be divided. A photo cannot be captured from a movie. . The recording media where you want to save photos is full. Playback on the TV Neither image nor sound is played on the connected TV. . When you are using the component A/V cable, set [COMPONENT] according to the requirements of the connected device (p. 82). . When you are using the component video plug, make sure the red and white plugs of the A/V connecting cable are connected (p. 37). . Images are not output from the HDMI OUT jack, if copyright protection signals are recorded in the images. . When you are using the S VIDEO plug, make sure the red and white plugs of the A/V connecting cable are connected (p. 37). The top, bottom, right, and left edges of images are trimmed slightly on a connected TV. . The LCD screen of your camcorder can display recording images across the entire screen (full pixel display). However, this may cause slight trimming of the top, bottom, right, and left edges of images when played back on a TV which is not compatible with full pixel display. . It is recommended you record images using the outer frame of [GUIDEFRAME] (p. 71) as a guide. The image appears distorted on the 4:3 TV. . This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. Set [TV TYPE] correctly (p. 81) and play back the image. Black bands appear at the top and bo...
Other models in this manual:Cameras - HDR-CX300E (2.41 mb)
Cameras - HDR-CX305E (2.41 mb)
Cameras - HDR-CX350E (2.41 mb)
Cameras - HDR-CX370E (2.41 mb)