Votes - 5, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
If anything is missing, contact your camera dealer. Camera Battery Pack Battery Interface Cable Wrist StrapNB-11L (with Charger IFC-400PCU WS-800*1 terminal cover) CB-2LDE Getting Started DIGITAL CAMERA DIGITAL CAMERA Warranty Stylus*1*4 (This Guide) Manuals Disk*2 Solution Disk*3 System Booklet *1 For attachment instructions, refer to the Camera User Guide on the DIGITAL CAMERA Manuals Disk. *2 Contains the Camera User Guide and ImageBrowser EX User Guide (p. 8). *3 Contains software used with the camera. For installation instructions, refer to the Camera User Guide, and for instructions on use, refer to the ImageBrowser EX User Guide. *4 PowerShot A3400 IS only Compatible Memory Cards A memory card is not included. The following memory cards (sold separately) can be used, regardless of capacity. For details on the number of shots and recording time per memory card, refer to “Specifications” in the Camera User Guide. • SD memory cards* • SDHC memory cards* • SDXC memory cards* * Conforms to SD specifications. However, not all memory cards have been verified to work with the camera. Convention in This Guide This guide uses PowerShot A4000 IS illustrations and screenshots for all explanations. Initial Preparations Initial Preparations Charging the Battery Remove the cover and insert the battery. • After aligning the omarks on the battery and charger, insert the battery by pushing it in ( ) and down ( ). Charge the battery. • Once you connect the power cord to the charger and plug the cord into a power outlet, the lamp will light up orange. • When charging is finished, the lamp turns green. Remove the battery. • For details on charging time and the number of shots or recording time available with a fully charged battery, refer to “Specifications” in the Camera User Guide. Inserting the Battery and Memory Card Open the cover. • Slide the cover ( ) and open it ( ). Insert the battery. • While pressing the battery lock in the direction of the arrow, insert the battery as shown and push it in until it clicks into the locked position. • To remove the battery, press the battery lock in the direction of the arrow. Terminals Battery Lock 3 Initial Preparations Check the card’s write-protect tab and insert the memory card. • Recording is not possible on memory cards with a write-protect tab when the tab is in the locked (downward) ...
Other models in this manual:Cameras - PowerShot A3400 IS (2.65 mb)
Cameras - PowerShot A2300 (2.65 mb)