Votes - 6, Average rating: 4.7
(
)
)
|
Other manuals for this model:
manual abstract
Viewing the Manuals Viewing the Manuals The following manuals are provided on the included DIGITAL CAMERA Manuals Disk. Adobe Reader is required to view the PDF manuals. Camera User Guide This guide covers the following topics. .Camera basics, from getting ready to shooting, playback, installing the included software, and importing images .Other instructions, about all camera features Software Guide This guide describes how to use the included software. .Insert the DIGITAL CAMERA Manuals Disk in the computer’s CD-ROM drive. .Follow the instructions displayed to view the manual. Initial Preparations Charging the Battery 1 Remove the battery cover and insert the battery. .After aligning the ^ marks on the battery and charger, insert the battery by pushing it in ( ) and down ( ). 2 Charge the battery. .Once you connect the power cord to the charger and plug the cord into a power outlet, the lamp will light up orange. .When charging is finished, the lamp turns green. Remove the battery. .For details on charging time and the number of shots or recording time available with a fully charged battery, refer to “Specifications” in the Camera User Guide. Initial Preparations Inserting the Battery and Memory Card Terminals Label 1 Open the cover. .Slide the cover ( ) and open it ( ). 2 Insert the battery. .While pressing the battery lock in the direction of the arrow, insert the battery as shown and push it in until it clicks into the locked position. .To remove the battery, press the battery lock in the direction of the arrow. 3 Check the card’s write-protect tab and insert the memory card. .Recording is not possible on memory cards with a write-protect tab when the tab is in the locked (downward) position. Slide the tab up until it clicks into the unlocked position. .Insert the memory card facing as shown until it clicks into the locked position. .To remove the memory card, push it in until you feel a click, and then slowly release it. 4 Close the cover. .Lower the cover in the direction of the arrow and press it until it clicks into the closed position. Initial Preparations Using the Screen .Open the screen ( ) and rotate it toward the lens 180° ( ). .Close the screen in this orientation ( ). Setting the Date and Time 1 Turn the camera on. .Press the ON/OFF button. .The [Date/Time] screen is displayed. 2 Set the date and time. .Press the buttons or turn the <5> dial to specify the date and time. .When finished, press the buttons or turn the <5> dial to choose [Date/ Time], and then press the buttons. .Playback now begins, and after the movie is fi nished, [ ] is displayed. Erasing the ImagesTo erase the image you chose in step 2, do the following. Note that erased images cannot be recovered. 1 Press the button. 2 After [Erase?] i...