Votes - 4, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
2. Focusing Focus a TS-E lens by turning the focusing ring. (Shots cannot be taken using the auto focus.) . After using tilt or shift, readjust the focus. . The distance scale is only valid when the tilt scale is set to the “0” position. ENG-5 3. Tilt Function Tilting inclines the lens relative to the image plane. When the tilt scale is set focusing and imaging planes are parallel. However, tilting puts the focusing plane at an angle to the imaging plane. . Example 1 . Example 2 To shoot so that all of an extensive obtain a large depth of field. is insufficient depth of field (Example by tilting in the opposite specific part of the subject ENG-6 Turn the tilt lock knob in the Loosen the tilt lock knob by Turn the tilt knob to adjust Using Tilt Using Tilt turning it in the direction of the amount of tilt. Focus the direction of the arrow to lock the arrow. shot by turning the focusing the amount of tilt for the ring. shot. . When you tilt the lens, sharp portions of touching these portions. . If you use the tilt and shift functions TS-E24mm f/3.5L at the same time, only use them within area of the light-gray tilt scale settings. Tilting the lens to other settings may However, if the tilt function is used alone, ENG-7 4. Shift Function Shifting moves the optical axis of the lens in parallel off the center of the imaging plane. Shift can be used to good effect in the situations shown below. . If you photograph a subject building with a normal lens, the building tapers away. But by placing the camera parallel shifting the lens, tapering effect. . When you are shooting a subject, you can move position where the camera appear in the shot take the picture. This lets you keep camera out of to change the ENG-8 Using Shift Turn the shift lock knob in Loosen the shift lock knob Turn the shift knob to adjust by turning it in the direction the amount of shift. Focus the direction of the arrow to of the arrow. the shot by turning the lock the amount of shift for focusing ring. the shot. . When you shift the lens, sharp portions avoid touching these portions. . If you use the tilt and shift functions TS-E24mm f/3.5L at the same time, only use them within area of the light-gray shift scale With large amounts of shift, screen may differ, so shooting with a small ENG-9 5. Rotation The rotation function enables you to change the direction of tilt or shift by rotating the tilt-shift mechanism. With the lens mounted on the camera, push the rotation lock release button towards the mount and then turn the tilt-shift mechanism. . The mechanism can be rotated through ± 90°. The lens clicks every 30° and locks in place in the 90° position. . When rotating the lens, set the tilt and shift scales to the “. Note that rotating the tilt-shift mechanism quickly while rotation lock release button may cause the shift lock fingers. ENG-10 6. Depth-of-Field Scale 7. Infrared Index (TS-E24mm f/3.5L) (TS-E24mm f/3.5L) The infrared index corrects the focus setting when using monochrome infrared film. Focus the subject, then adjust the distance setting moving the focusing ring to the corresponding infrared index mark. The depth of field is the distance in front of and behind the plane of focus on the subject that appears sharp. The depth of field is indicated by the area between the depth-of-field scale below the distance scale. Numbers in are in F values, and for example, distance is 1.5m and the aperture sharp area will extend from about Some EOS cameras cannot use the instructions for your EOS . The depth-of-field scale tilt scale is set to the . The depth-of-field indicator. ENG-11 8. TS-E Tripod Adapter (Sold Separately) With some camera models, the tilt, shift and rotation functions can no longer be used when the camera is mounted directly on a tripod. When this happens, fit the optional TS-E tripod adapter into the tripod mount socket on the camera before mounting the camera on the tripod. 9. Exposure Shots can be taken using AE (automatic exposure) as long as the tilt and shift scales are set to the “0” position. The use of AE is not recommended when the lens is tilted or shifted as exposure errors may result. It is recommended that you use the exposure values when the tilt and shift scales are set to the “0” position as a guide and then take the shot with as many exposure settings as possible. ENG-12 10. Hoods The EW-75BII, EW-79BII and EW-65III hoods can keep unwanted light out of the lens, and also protect the lens from rain, snow, and dust. Attach the hood using the following procedure. 1 2 1 TS-E24mm f/3.5L Align the hood with the hood mount and then turn the hood clockwise to securely lock it in place. TS-E45mm f/2.8 • TS-E90mm f/2.8 1) Pressing the buttons on the base of the push the hood onto the hood mount 2) Release the buttons so that the into the grooves on the mount. ENG-13 Hoods 11. Filters (Sold Separately) You can attach filters to the filter mounting not attach...
Other models in this manual:Cameras - TS-E 90mm f/2.8 (2.96 mb)
Cameras - TS-E 24mm f/3.5L (2.96 mb)