Votes - 1, Average rating: 5 ( )

Manafacture: Canon File size: 5.02 mb File name: Language of manual:

Other manuals for this model:

Cameras - MD140 (4.7 mb)

Cameras - MD140 (5.14 mb)

-Manual focus returns to automatic focus (AF). -Manual exposure adjustment returns to automatic exposure. -Zoom position returns to full wide angle W. • ..In Quick-Start ready mode, the camcorder consumes only half the power used while recording. Using this mode you can save energy when using a battery pack. • ..While the camcorder is in Quick-Start ready mode (QUICK START button lit up): -If you change the position of the / switch, the camcorder will shut off. To restore the power, turn the camcorder off and then on again. -The camcorder will shut off if left in the Quick- Start ready mode for 30 minutes, regardless of the [POWER SAVE] setting ( 41). To restore the power, turn the camcorder off and then on again. -If you open the cassette compartment cover, the camcorder will return to record pause mode. Playback Playing Back Movies Play back the tape on the LCD display or close the LCD panel to use the viewfinder. You can also turn the LCD panel and close it with the screen facing out. ( 8) 1 Holding the lock button pressed down, set the switch to PLAY. 2 Move the / switch to (tape). 3 If the joystick guide does not appear on screen, press ( ) to display it. 4 Locate the point where you want to begin the playback. Push the joystick ( ) towards to rewind the tape or ( ) towards to fast forward. 31 5 Push the joystick ( ) towards / to begin the playback. DURING PLAYBACK 6 Push the joystick ( ) towards / again to pause the playback. 7 Push the joystick ( ) towards to stop the playback. TO ADJUST THE VOLUME 1 Press FUNC. . 2 Select ( ) [ SPEAKER VOLUME] and adjust ( ) the volume. • The sound from the built-in speaker will be muted when you close the LCD panel or while the STV-250N Stereo Video Cable is connected to the AV terminal. • If you turn off the volume completely, the icon will change to . 3 Press FUNC. to close the menu. SPECIAL PLAYBACK MODES To operate the special playback modes use the buttons on the wireless controller*. There is no sound during the special playback modes. To return to normal playback, push the joystick ( ) towards / or press PLAY on the wireless controller*. • ..Fast Playback: Push the joystick ( ) towards or ( ) towards . Hold the joystick pressed down to rewind/fast forward the tape while continuing the playback. You can also press and hold REW or FF on the wireless controller*. • ..Reverse Playback: During normal playback press . • ..Frame Reverse/Advance: During playback pause press / . Keep pressed for continuous frame-by-frame playback. • ..Slow Playback: During normal or reverse playback press SLOW . • ..Double Speed Playback: During normal or reverse playback press . Playback *The wireless controller is included only with the . NOTES • ..You can display the date and time of the recording ( 53). • ..During some special playback modes, you may notice some video problems (blocky video artifacts, banding, etc.) in the playback picture. • ..To protect the tape and video heads, the camcorder will enter the stop mode ( ) if left in playback pause ( ) mode for 4 minutes 30 seconds. To resume the playback push the joystick ( ) towards / . Returning to a Pre-marked Position If you wish to return to a particular scene later, mark the point with the zero set memory and the tape will stop at that point when you rewind/fast forward the tape. ( 8) 1 While recording or during playback, press ZERO SET MEMORY on the wireless controller at the point you wish to return to later. • The time code changes to “0:00:00 ”. • Press ZERO SET MEMORY again to cancel the memory. 2 If you marked the zero memory while recording, set the camcorder to mode. If you marked the zero memory during playback, press . 3 Press to locate the zero mark. • If the tape counter shows a negative number, press instead. • appears and the camcorder rewinds/fast forwards the tape. Basic Functions 32 32 Playback • The tape stops at or near the zero mark, disappears and the correct time code will be displayed again. NOTES If there are blank sections between recordings, the zero set memory may not work correctly. Locating the End of the Last Scene After playing back a tape, use this function to locate the end of the last scene recorded in order to continue recording from that point. POINTS TO CHECK Stop the playback before using this function. FUNC. ( 22) 1 Press FUNC. . 2 Select ( ) [ END SEARCH] and press ( ). 3 Select ( ) [EXECUTE] and press ( ). • “END SEARCH” appears. • The camcorder rewinds/fast forwards the tape, plays back the last few seconds of the recording and stops the tape. • To cancel the search push the joystick ( ) towards . • ..If there are blank sections between recordings, the end search may not work correctly. • ..You cannot use the end search to locate the end of a scene that was audio dubbed. Locating Scenes by Recording Date You can locate the change of the date/ time zone with the date search function. Press or on the wireless controller. • Press more than once to search for further date changes (up t...

Download now

Please, enter two numbers from picture: