Votes - 2, Average rating: 4
(
)
)
|
manual abstract
power cord) NB-2LH Battery Pack Lithium Button Battery CR1616 Lens Cap and Lens Cap Cord STV-250N Stereo Video Cable The serial number of this product can be found at the battery attachment unit of the camcorder. Write down the number and other information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Date of Purchase: Model Name: ZR100 A Purchased From: Serial No.: Dealer Address: Dealer Phone No.: Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. Components Guide ZR100 E Introduction REC SEARCH – button ( 25) / (record review) button ( 25) / (rewind) button ( 29) REC SEARCH + button ( 25) / (fast forward) button ( 29) LCD BACKLIGHT button ( 18) WIDESCREEN button ( 57) / DATA CODE button ( 59) NIGHT MODE button ( 41) / (stop) button ( 29) FOCUS button ( 44) / / (play/pause) button ( 29) DIGITAL EFFECTS ON/OFF button ( 53) AE SHIFT button ( 43) / END SEARCH button ( 61) REC PAUSE button ( 69) Speaker ( 31) LCD screen ( 18) SET dial ( 34) CHARGE indicator ( 12) Program selector ( 38) EASY Easy recording Program AE Backup battery compartment ( 16) Battery attachment unit ( 12) / Serial number DC IN terminal ( 12) MENU button ( 34) Dioptric adjustment lever ( 17) OPEN/EJECT switch ( 15) Viewfinder ( 17) Zoom lever ( 26) BATT. button ( 12) Finger rest Power switch ( 5) Strap mount ( 88) Cassette compartment cover ( 15) Grip belt ( 17) Cassette compartment ( 15) Start/stop button ( 22) Introduction E Terminal cover DV terminal ( 67) Stereo microphone Tripod socket ( 28) AV terminal ( 32) 11 Preparing the Power Supply Attaching the Battery Pack 1. Turn the POWER switch to OFF. 2. Attach the battery pack to the camcorder. • Remove the terminal cover of the battery pack. • Press lightly and slide it in the direction of the arrow until it clicks. Charging the Battery Pack 1. Connect the power cord to the adapter. 2. Plug the power cord into a power outlet. 3. Connect the power adapter to the camcorder’s DC IN terminal. The CHARGE indicator starts flashing. It glows steadily when charging is complete. 4. When charging is complete, disconnect the power adapter from the camcorder. Unplug the power cord from the power outlet and disconnect it from the DC IN terminal CHARGE indicator adapter. 5. Remove the battery pack after use. Press the BATT. button to remove the battery. Using a Household Power Source Connect to a household power source to use the camcorder without worrying about the battery power. You can keep the battery pack attached; the battery power will not be consumed. E 1. Turn the POWER switch to OFF. 2. Connect the power cord to the power adapter. 3. Plug the power cord into a power outlet. 4. Connect the power adapter to the camcorder’s DC IN terminal. • Turn off the camcorder before connecting or disconnecting the power adapter. • If the adapter is used close to a TV, it may cause picture interference. Move the adapter away from the TV or the antenna cable. • Do not connect any products that are not expressly recommended to the camcorder’s DC IN terminal or to the power adapter. • You may hear some noise from the power adapter during use. This is not a malfunction. • Do not disconnect and reconnect the power cord while charging a battery pack. Charging may stop. The battery pack may not be charged correctly even if the CHARGE indicator glows steady. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and attach it back to the camcorder. • When the power adapter or battery pack is defective, the CHARGE indicator flashes rapidly (at about 2 flashes/second) and charging stops. Basic Functions Preparations • The CHARGE indicator informs you about the charge status. 0-50%: Flashes once every second More than 50%: Flashes twice every second 100%: Glows steadily 13 • Charging, Recording and Playback Times Below times are approximate and vary according to the charging, recording or playback conditions. Battery Pack NB-2LH NB-2L BP-2L12 BP-2L14 Charging Time 130 min. 115 min. 205 min. 235 min. Max. Recording Time Viewfinder 135 min. 115 min. 245 min. 300 min. LCD normal 95 min. 80 min. 170 min. 210 min. bright 85 min. 70 min. 145 min. 185 min. Typical RecordingTime* Viewfinder 75 min. 60 min. 130 min. 160 min. LCD normal 55 min. 45 min. 95 min. 120 min. bright 50 min. 40 min. 85 min. 105 min. Playback Time 100 min. 85 min. 175 min. 220 min. * Approximate times for recording with repeated operations such as start/stop, zooming, power on/off. Actual time may be shorter. • We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and 86 °F). Outside the temperature range of 0 °C to 40 °C (32 °F to 104 °F), the CHARGE indicator flashes rapidly and charging stops. • A lithium ion battery pack can be charged at any charge state. Unlike conventional battery packs, you do not need to completely ...