Votes - 0, Average rating: 4 ( )

Manafacture: Panasonic File size: 5.37 mb File name: Language of manual:

Photos and specs  Panasonic  SDR-S10

If so, click [Yes] and install it. .If it is necessary to reboot the computer after the application has been installed, click [Yes] and reboot it. .If you install the software in a computer that is not compatible with DirectX 9.0b or 9.0c, the computer may stop operating properly. If you are unsure whether or not your computer is compatible, contact the maker of your computer. .After the installation is finished, the icon [ ] is displayed in the task tray on the computer screen. If you connect this unit and a computer with the USB cable, the [SD Browser auto start] screen appears for starting MotionSD STUDIO. (l86) VQT1E14 Reading the MotionSD STUDIO operating instructions Reading the MotionSD STUDIO operating instructions For details on how to use MotionSD STUDIO, read the PDF instructions. Select [start]> [All Programs (Programs)]> [Panasonic]> [MotionSD STUDIO 1.2E]> [Manual]. .After starting the software, on the menu select [Help]>[Manual] to display the help files. .You will need Adobe Acrobat Reader 5.0 or later to read the PDF operating instructions. (l78) With a computer Connection and recognition procedures After the software is installed, the unit must be connected to the computer and be correctly recognised by the computer. .Connect after installing the software. .If the supplied CD-ROM is inserted in the computer, remove it. (If the installer setup is running, wait until it finishes, then remove the CD-ROM.) .If the recognition procedure is not accomplished properly, operation will not be possible after connecting the unit to the computer. .If the unit fails to operate normally, it may mean that you have not conducted the installation or recognition procedure properly. 1 Slide the terminal cover lock to OPEN and then open the terminal cover. 2 Connect this unit to the AC adaptor and turn on the unit. .Be sure to set the mode dial to OFF when connecting the AC adaptor to this unit. VQT1E14 With a computer 3 Connect this unit and a computer. A A USB cable (supplied) .Insert the plugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully. .Do not use any other USB connection cables except the supplied one. (Operation is not guaranteed with any other USB cables.) 4 Press the cursor button up or down to select [PC CONNECT], then press the cursor button in the centre. 5 The [SD Browser auto start] screen appears. .If [Yes] is clicked, MotionSD STUDIO starts. (l89) .Click [No] if you do not want to start MotionSD STUDIO. .When the unit is connected to a computer, its power cannot be turned off. In this case, disconnect the USB cable (l90). .When a computer is accessing the card in this unit, the card access lamp lights. ( appears on the LCD monitor.) Do not disconnect the USB cable or AC adaptor while the card is being accessed as it may damage the data. .It may be necessary to reboot the computer after connecting this unit to it for the first time. VQT1E14 With a computer Verifying that the unit is correctly recognised by the computer To verify if this unit is correctly recognised by the computer, turn on this units power and then connect the unit to the computer with a USB cable and follow the steps below. .With some computers including those made by NEC, the Device Manager may not be displayed if a mode that places restrictions on the functions has been established. Consult the manufacturer or follow the steps in your computer’s operating instructions to establish a mode in which all the functions can be used, then proceed with operation. 1 Select [start] > ([Settings] >) [Control Panel] > ([Performance and Maintenance] > ) [System]. 2 Click the [Hardware] tab, then click [Device Manager]. 3 Verify the following items are displayed. . If the driver has been recognised properly [USB Mass Storage Device] appears at [Universal Serial Bus controllers]. . If the driver has not been recognised properly [!] or [Unknown device] appears at [Universal Serial Bus controllers] or [Other devices], etc. (Where the display will appear depends on the type of computer you are using.) You can use the following methods to enable the driver to be recognised. Method 1: Turn off the unit and your computer once and try verifying again. Method 2: Remove the SD card and try verifying again. Method 3: Try connecting the unit to another USB port on your computer. VQT1E14 With a computer About the computer display When the unit is connected to a computer, it is recognised as an external drive. . Drive icons [Removable Disk] is displayed in [My Computer]. .Windows XP: .Windows 2000: . Example folder structure .SD-Video format motion pictures are stored in the [PRG...] folder. (“...” denotes a number from 001 to 4095.) .Up to 99 files can be recorded in the [PRG...] folder. .JPEG format still pictures (IMGA0001.JPG etc.) are stored in the [100CDPFP] folder. These can be opened with picture software that supports JPEG pictures. .Up to 999 files can be recorded in the [100CDPFP...

Download now

Please, enter two numbers from picture: