Votes - 3, Average rating: 3.7
(
)
)
|
Other manuals for this model:
manual abstract
¦ Under certain conditions, static electricity can cause the flash not harmful to the camera and is not a malfunction. ¦ When images are uploaded or downloaded, the data transfer may be static electricity. In this case, disconnect and re-connect the USB cable trying the transfer again. ¦ Before an important event or going on a trip, you should check the camera condition. - Take a picture for testing the camera condition and prepare extra battery. - Samsung cannot be held responsible for camera malfunctions. ¦ There are several Memory Error! .Memory card error > Turn off the camera power and > Insert the memory card again > Insert and format the memory card (Card Locked! .The memory card is locked > SD/SDHC memory card : Slide the write protect switch memory card No Card! .A memory card is not inserted > Insert the memory card again > Turn off the camera power and turn it on again No Image! .There are no images stored on the memory > Take images > Insert a memory card that is holding some images File Error! .File error > Format the memory card .Memory card error > Contact a camera service centre . 69 . Warning Low Battery! .There is low battery capacity > Insert fresh batteries. Low Light! .When taking pictures in dark places > Take pictures in Flash Photography mode. Before contacting a service centre ¦ Please check the following The camera doesn’t switch on .There is low battery capacity > Insert fresh batteries. (p.10) .Battery is inserted incorrectly with the polarities reversed. > Insert the battery according to the polarity marks (+, -) .Battery is not inserted > Insert the battery and turn on the camera The camera power ceases while in use .The battery is exhausted > Insert fresh batteries .The Camera is turned off automatically > Turn on the camera power again. . 70 . Battery power quickly .The Camera is being > Keep the camera in warm remove it in order to take images Camera does not take images when .There is insufficient memory capacity > Delete unnecessary image files .The memory card has not been formatted > Format the memory card (p.63) .The memory card is exhausted > Insert a new memory card .The memory card is locked > Refer to [Card Locked!] error message (p.69) .The camera’s power is off > Turn the camera power on .The battery is exhausted > Insert fresh batteries. (p.10). .Battery is inserted incorrectly with the polarities reversed. > Insert the battery according to the polarity marks (+, -) The camera suddenly stops working while in use .The camera stopped due to a malfunction > Remove /re-insert battery and switch the camera on Before The images are unclear .A picture was taken the > Select an appropriate macro .Taking a picture beyond the > Take a picture within the flash range .The lens is smudged or dirty > Clean the lens The flash does not fire .Flash off mode has been selected > Dis-engage flash off mode .The camera mode can’t use the flash > Refer to the FLASH instruction (p.24) Incorrect date and time is displayed .The date and time have been set incorrectly or the camera has adopted default settings > Reset the date and time correctly The camera buttons do not operate .Camera malfunction > Remove/re-insert battery and switch the camera on A card error has occurred while the memory card is in the camera. .Incorrect memory card format > Re-format the memory card The images don't play back .Incorrect file name (Violation of DCF format) > Do not change the image file name Colour of image is .White balance or effect > Select appropriate White Images are too bright .Exposure is excessive > Reset exposure compensation No image on external monitor .The external monitor has not been connected > Check the connection cables .There are incorrect files in the memory card > Insert a memory card that has correct files When using the PC’s explorer, the [Removable Disk] file does .Cable connection is incorrect > Check the connection .The camera is off > Turn the camera on .The operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 10.0 10.3. Alternatively the PC does not support USB > Install Windows 98, 98SE, 2000, ME, XP/ Mac OS 10.0 - 10.3 to PC that supports USB .The camera driver is not installed > Install a [USB Storage Driver] . 71 . Specifications ¦ Image Sensor - Type : 1/1.8" CCD - Effective Pixel : Approx. - Total Pixel : Approx. 8.3Mega-¦ Lens - Focal Length : SHD f = 7.8 ~ 39mm (35mm film equivalent - F No. : F2.8 ~ 4.4 - Digital Zoom : · Still Image mode : 1.0X ~ 5.0X · Play mode : 1.0X ~ 12.0X (depends on image size) ¦ LCD Monitor : 2.5" color TFT LCD (230,000 dots) ¦ Focusing - Type : TTL auto focus, AF Assist Lamp, Manual focus, Multi Point - Range Normal Macro Auto Mode Wide 80cm ~ infinity 10 ~ 80cm 10cm ~ infinity Tele 50 ~ 80cm 50cm ~ infinity Super Macro Manual Focus Wide 1 ~ 10cm 1cm ~ infinity Tele - 50cm ~ infinity ¦ Shutter - Speed : Auto : 1 ~ 1/2,000 sec. M, S Mode : 15 ~ 1/2,000 sec. Night : 15 ~ 1/2,000 sec. Fireworks : 4 sec. . 72 . ¦ Exposure - Control : P...
Other models in this manual:Cameras - S850B (7.96 mb)
Cameras - S850S (7.96 mb)