Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
.When recording the Card Images on a Tape, a PhotoShot index signal is automatically recorded with a picture. .Even if you edit the Slide Show, it is not applied to the order in copying the pictures. .For other notes, see page 62. 1 NOW RECORDING REC PHOTO 4 SHOT 2 2 W.B./SHUTTER/IRIS/ MF/VOL/JOG PUSH 2 1 1 TAPE CARD ACCESS CAMERA CARD P. B. VCR RESET 2 STILL MPEG4 VOICE CARD MODE OFF ON MODE POWER ACCESS CAMERA CARD P. B. VCR RESET 1 3, 4, 1, 2 W.B./SHUTTER/IRIS/ MF/VOL/JOG PUSH 2 1 2, 4 1 1 2 5 PICTURE No.25 100-0012 640 640 1200 640 640 1200 No.3 FILE SEARCH PUSH MENU TO RETUR STILL MPEG4 VOICE CARD MODE OFF ON MODE 3 4 BACKLIGHT CAMERA STILL POWER EDIT PUSH MENU TO RETURN No.5 9SEC 213M.SLIDE 41, 2, 3, 4, 5, 7 1, 2, 3W.B./SHUTTER/IRIS/ MF/VOL/JOG PUSH 12 8 1, 6, 7 1 SLIDE 5SLIDE 6640 640 1200 640 640 1200 BACKLIGHT EDIT PUSH MENU TO RETURN No.5 9SEC 213M.SLIDE 41, 2, 3, 4, 5, 7 1, 2, 3W.B./SHUTTER/IRIS/ MF/VOL/JOG PUSH 12 8 1, 6, 7 1 SLIDE 5SLIDE 6640 640 1200 640 640 1200 BACKLIGHT Slide Show The recorded still pictures in the Card can be played back like a Slide Show. You can set up a Slide Show or change the content. To Select Pictures to Play Back in Your Slide Show 1 After setting the [STILL/MPEG4/VOICE] Switch to [STILL], set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]. .Slide Show editing screen appears. 2 Set [EDIT] >> [YES]. 3 Rotate the [PUSH] Dial to select a picture and then press the dial. 4 Rotate the [PUSH] Dial to select playback order and then press the dial. .This step is skipped when there are no pictures set for the Slide Show. 5 Rotate the [PUSH] Dial to adjust the playback time and then press the dial. .The Playback Order Indication 1 and the Playback Time (Second) Indication 2 appear. .The [.] Indication 3 is displayed below pictures that have been selected for the Slide Show. .To select the next picture, repeat Steps 3 to 5 above. 6 Press the [MENU] Button to end the setup. 7 After setting [SLIDE SHOW] >> [PRESET], press the [MENU] Button. 8 Press the [1] Button. .The [M.SLIDE!] Indication is displayed. 4 To Play Back All the Pictures Continuously After setting the [SLIDE SHOW] to [ALL], press the [1] Button. .The [SLIDE!] Indication is displayed. 5 .All pictures are played back for approximately 5 seconds each, from the first to the last recorded picture, and playback then stops. To Pause the Slide Show Press the [;] Button. .The [(M.) SLIDE;] Indication is displayed. 6 To Stop the Slide Show Press the [.] Button. To Verify the Selected Pictures Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [VERIFY] >> [YES]. .Only the selected pictures are displayed in Multi-Picture Mode in the Playback order. To Delete the Selected Pictures 1 1111Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]. 2 2222Set [DELETE] >> [YES]. 3 3333Select the picture you want to delete and press the [PUSH] Dial. To Reset the Slide Show Setup Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [RESET] >> [YES] >> [YES]. .Slide Show settings are reset. .For other notes, see page 63. 41 1 2, 4, 5, 6, 7, 8 W.B./SHUTTER/IRIS/ MF/VOL/JOG PUSH 122 3 PHOTO SHOT 1) 2) 4) 1) 3) 213, 4W.B./SHUTTER/IRIS/ MF/VOL/JOG PUSH 121 2, 4 rTITLE USR00002.TTL 6 5 PHOTO SHOT TAPE CARD 1 2, 4, 5, 6, 7, 8 W.B./SHUTTER/IRIS/ MF/VOL/JOG PUSH 122 3 PHOTO SHOT 1) 2) 4) 1) 3) 213, 4W.B./SHUTTER/IRIS/ MF/VOL/JOG PUSH 121 2, 4 rTITLE USR00002.TTL 6 5 PHOTO SHOT TAPE CARD Creating a Title You can create a title and record on a Memory Card. 1 Camera Mode: Slide the [STILL/MPEG4/VOICE] Selector to [STILL] and point the camera at the image you want to use for creating a title. VCR Mode: Search for the image you want to use for creating a title and set the Palmcorder to Still Playback Mode. 2 Set [CARD SETUP] >> [CREATE TITLE] >> [YES]. 3 Press the [PHOTO SHOT] Button. .The title is stored. .To perform PhotoShot again, select [RETURN]. 4 Press the [PUSH] Dial to select [LUMINANCE]. 5 Rotate the [PUSH] Dial to adjust the title contrast and then press it. 6 Press the [PUSH] Dial to select [COLOR]. 7 Rotate the [PUSH] Dial to select desired color and press it. 8 Select [RECORD] and then press the [PUSH] Dial. Selecting Colors If you make color selection by rotating the [PUSH] Dial when creating a title, you can change the color as follows. 1) Original Color (The color of the captured image) .Title in the original color in which the dark portion (blackish portion) of the captured image is missing. 2) Preset colors (black, blue, green, cyan, red, pink, yellow, and white) .Title in a preset color in which the dark portion (blackish portion) of the captured image is missing. 3) Original color (the color of the captured image) .Title in the original color in which the bright portion (whitish portion) of the captured image is missing. 4) Preset colors (black, blue, green, cyan, red, pink, yellow, and white) .Title in a preset color in which the bright portion (whitish portion) of the captured...