Votes - 2, Average rating: 4
(
)
)
|
manual abstract
The USB equipment operates with the driver installed as standard in the OS. VQT3U98 Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) . Before starting the installation, close all applications that are running. . Do not perform any other operations on your PC while the software is being installed. . Explanation of operations and screens is based on Windows 7. 1 Insert the CD-ROM into the PC. . The following screen is displayed automatically. Click [Run setup.exe] # [Yes]. . If Windows 7 is in use or the following screen is not displayed automatically, select [Start] # [Computer] (or double-click on [Computer] on the desktop), and then double-click [Panasonic]. 2 Click [Yes]. 3 Click [Next]. 4 Read the [End User License Agreement], then place a check beside [I accept the terms of the license agreement] if you agree to them and click [Next]. 5 Select the country or region where you live, then click [Next]. . If the country or region cannot be selected, select [NTSC Area]. . When the confirmation message appears, click [Yes]. 6 Select where the application is to be installed, then click [Next]. 7 Select [Yes] or [No] to create shortcut. . A message regarding the playback in the environment used may be displayed depending on the performance of the PC used. Click [OK] after confirming. VQT3U98 8 When installation is complete, some notes will appear. Check the contents, then close the window. 9 Select [Yes, I want to restart my computer now.], then click [Finish]. The PC must be rebooted for the application to work. . Uninstalling HD Writer XE 1.0 Follow the steps below to uninstall any software applications that you no longer require. 1 Select [Start] # [Control Panel] # [Uninstall a program]. 2 Select [HD Writer XE 1.0], then click [Uninstall]. . Proceed with the uninstallation by following the on-screen instructions. . After uninstalling the software, be sure to reboot the PC. VQT3U98 Connecting to a PC . Connect this unit to the PC after the software applications are installed. . Remove the supplied CD-ROM from your PC. A USB cable (supplied) . Insert the plugs as far as they will go. . Insert the SD card. 1 Connect this unit to the AC adaptor. . Use the AC adaptor to free you from worrying about the battery running down. 2 Turn on the unit. . This function is available in all modes. 3 Connect this unit to a PC. . The USB function selection screen will appear on the screen of the unit. 4 Touch [PC] on the screen of this unit. . The Smart Wizard Screen is automatically displayed when HD Writer XE 1.0 is installed. . This unit is automatically recognized as an external drive of the PC. (l103) . When you select an option other than [PC], reconnect the USB cable. . When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on. . Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) . When performing reading/writing between a PC and an SD card, be aware that some SD card slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or SDXC Memory Card. . When using an SDXC Memory Card, check the following support site. . To disconnect USB cable safely Select the icon in task tray displayed on the PC, and then click [Eject Panasonic Camcorder]. . Depending on your PC’s settings, this icon may not be displayed. VQT3U98 About the screen indication of the unit . Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen. . If the screen does not change when the unit is operated while connected to a PC, disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be destroyed when above operation is performed while accessing the SD card.) About the PC display When the unit is connected to a PC, it is recognized as an external drive. . Removable disk (Example: ) is displayed in [Computer]. We recommend using HD Writer XE 1.0 to copy motion picture data. Using Windows Explorer or other programes on the PC to copy, move or rename files and folders recorded with this unit will result in them being unusable with HD Writer XE 1.0. Example folder structure of an SD card: CAM_SD DCIM 100CDPFQ 101CDPFS AVCHD PRIVATE . . AVCHDTN . BDMV . The following data will be recorded. 1 MPO system/JPEG system still pictures (up to 999 still pictures can be recorded. ([11000001.MPO], [11000001.JPG], etc.)) 2 MPO system/JPEG system still pictures created from motion pictures 3 The motion picture thumbnails 4 AVCHD format motion picture files ([00000.MTS] etc.) . Copying your still pictures to...