Votes - , Average rating: ( )

User manual Panasonic, model AJHPX2000

Manafacture: Panasonic
File size: 14.55 mb
File name: AJHPX2000.PDF

Language of manual:

The document is loading, please wait

Download nowClose

The document is loading, please wait

Download nowClose

(When the menu is accessed, the menu screen is superimposed.) The signals output from the MON OUT connector or VIDEO OUT connector are switched with the OUTPUT SEL switch. However, the switching operation is not acknowledged during the recording operation. MEM: During EE, such as recording, video images taken by the camera are output. Meanwhile, signals on the P2 card are output during playback. CAM: The camera images are output at all times. OFF: No signal is output from the VIDEO OUT or MON OUT connector. OUTPUT SEL switch Set the characters to be superimposed on the signals output from the VIDEO OUT connector by using the VIDEO OUT CHARACTER switch and the OUTPUT ITEM item on the menu (

screen on the SYSTEM SETTING page). Adjustments and for Recording VIDEO OUT CHARACTER switch Adjustments and Settings for Recording : Selection of video output signals Settings of signals output from MON OUT connector Settings of signals output from MON OUT connector The MON OUT connector outputs down-converted analog signals. Set the video signals output from the MON OUT connector by using the MONITOR OUT item on the menu (

screen on the SYSTEM SETTING page). Item Variable range Remarks MONITOR OUT VBS VF Y Set video signals output from the MON OUT connector. VBS: Analog composite signals are output. VF: Y signals to be output to the viewfinder is output. The status screen is also superimposed. Y: Analog HD-Y signals are output. Set to superimpose characters to the VBS signals output from the MON OUT connector in the MONITOR OUT CHARA item of the menu (

screen on the SYSTEM SETTING page). Item Variable range Remarks MONITOR OUT CHARA ON OFF Superimpose characters on the VBS output signals from the MON OUT connector. ON: To superimpose OFF:Not to superimpose ..Note This does not link with the VIDEO OUT CHARACTER switch. Adjustments and Settings for Recording : Selection of video output signals Handling data Handling data Set data file configuration The unit employs 5 sets for the file data area. For menu items that can be read from or stored in the FACTORY data: respective areas, refer to [Menu] (page 151) The area for storing factory settings Data cannot be revised with menu operations. ..Notes USER data: • For information about how to navigate through the menu The area for storing the data set by menu operations for this section, see [Setting Menu Options] (page 153). The FACTORY data is stored as the factory setting. • Access the respective data settings files after switching CURRENT data: the PC MODE to “OFF”. If the respective data settings The area for storing the operating status of the unit files are accessed when the unit is in USB DEVICE The set value in this area is revised by menu mode, an error may occur. The PC MODE can be operations. operated from the screen on the SCENE file: SYSTEM SETTING page. Four sets of scene files are provided. LENS file: Eight sets of lens files are provided. It is possible to write eight setup files on the SD SD memory card memory card. SET UP data No. of files: 8 LENS FILE READ LENS FILE WRITE WRITE USER DATA READ USER DATA LENS FILE CARD R/W WRITE LENS FILE CARD R/W READ READ FACTORY DATA SD CARD READ/WRITE WRITE SD CARD READ/WRITE READ SCENE WRITE SCENE READ Menu operations To revise the set value CURRENT data (Operating status of the unit) No. of files: 1 USER data No. of files: 1 FACTORY data (Revision disable) No. of files: 1 SCENE file No. of files: 4 LENS file No. of files: 8 SD memory card : Files built in the unit Lens file No. of files: 8a8 : Menu operations It is possible to write eight titles for eight lens files on the SD memory card. Setting Data Using an SD memory card Adjustments and for Recording An SD memory card (optional accessory) can be used as a setup card that stores up to eight files of settings menu specifications. This data allows you to quickly reproduce an optimum state. Regarding SD memory cards, please see (page 21). Adjustments and Settings for Recording : Handling data Handling SD memory cards Handling SD memory cards An SD memory card may be inserted or removed, either before or after the power is turned on. To insert an SD memory card Open the lid of the switch cover, and insert an SD memory card (optional accessory) into the SD memory card slot with the notch upward. Close the lid. To remove the SD memory card Open the lid of the switch cover, and ensure that the BUSY lamp is not illuminated. Then, further depress the SD memory card towards the main unit. This releases the SD memory card from the insertion slot. Take hold of the SD memory card and remove it. Close the lid. SD memory cards must not be used or stored in an environment where they may be • Exposed to high temperatures/humidities; • Exposed to water droplets; or • Electrically charged. For storage, the SD memory card must be kept inserted into the unit with the lid closed. ..Note An SD memory card ...