Votes - 3, Average rating: 4.3 ( )

Manafacture: Go-Video File size: 1.07 mb File name: 1d9cea02-f316-455c-80d0-94d26b094d04.pdf Language of manual:

Press to temporarily stop a tape while recording (pause) or while playing (still). Push while in Still to Frame Advance. Pressing these buttons slows the speed the tape is playing. Successive pressings of the + key on the remote steps up the speed of the tape. Successive pressings of the - key on the remote slows down the speed of the tape. Press PLAY to resume normal speed. These are also SLOW+ SLOW- the 8 and 9 buttons. SKIP During playback, pressing this key once causes the tape to forward picture search for 60 seconds. Pressing it twice causes the picture to forward picture search for 120 seconds. Press up to 5 times to skip 5 minutes. This is also the Zero Return button. During Copy, pressing this key once will edit out the next 60 seconds of your copy tape. Press twice to easily remove commercials when copying TV shows. Press up to 5 times to edit out 5 minutes. Press to manually adjust the tracking while TRK+ TRK- playing a tape. These are also the 3 2 and buttons. MENU PICTURE + PICTURE Press to enter and exit the On-Screen menu System. Digital Picture Enhancement. Press to adjust picture sharpness. You can press this button 8 times, up or down toadjust sharpness. These are also the 5 and 6 buttons. VIEW 0 - 9 Press to select which source you will view on your TV - Deck One, Deck Two, Tuner (TV channel), or Line input. The TV/VCR button must be set to VCR for this button to work. Press two digits to enter a desired channel. Press ‘0’ first for channels 1-9. Also used for menu system programming. CHAPTER 1 - THE DUAL-DECK SYSTEM 13 NOTE: An asterisk in a box - , will appear on the screen to the left of the currently selected TV view. On-Screen Display The On-Screen Display contains information about the status of each deck. The On-Screen Display appears on your screen automatically when you turn the power on, when you press a deck function key (such as Play, Rewind, etc.) and when you change channels. The On-Screen Display also shows any Timer Record errors and status. This automatic display will disappear after a few seconds. You can also manually summon the on-screen display by pressing the OSD key on the remote control. If you do this, the On-Screen Display will remain on the screen until you press OSD again. If you don’t want the On-Screen Display to come on automatically, you can set the DISPLAY MODE in the SETUP MENU to OFF. The On-Screen Display has three basic parts: Date/Time This indicator displays the current date and time. Deck Status Displays the tape status (such as Play, tape speed, Rewind, etc.), current tape counter time, and record source. OTR and the duration will be displayed if One-Touch Recording is in progress. CH The channel indicator displays the channel that the Dual-Deck VCR is tuned to. In addition, the tuned channel’s audio mode (Mono, Stereo, SAP or TV/SAP) is displayed below the CH indicator. H A small ‘H’ will appear next to the Tape Speed to indicate when a tape with Hi-Fi Audio is being recorded or played. 14 DISCOVER THE DUAL-DECK DIFFERENCE Operating Your Dual-Deck VCR CHAPTER 2 NOTE: You may program your menus to be in Spanish. See the Set Clock/ Language menu. See page 30. NOTE: The first time you press after hooking up your VCR or after a powerMENUfailure, the SET LANGUAGE screen will automatically come up. At that time, choose your language preference (1 or 2) and press to proceed with step 3. Until you set the date and time, MENUpressing menu will display SET CLOCK/ LANGUAGE menu, then the FEATURES menu, and the DECK TWO menu and DECK ONE menu. Setting the Date and Time If you plan to use the Timer Record or Date and Time Stamp features of your Dual-Deck VCR, you’ll need to set the correct date and time first. To set the current date & time: 1. Press MENU . The Features menu will appear. Note: If you press MENU and do not get the Features menu, continue pressing MENU until you see the Features menu. 2. Press 1 1 . The Setup menu will appear. 3. Press . The Set Clock/Language menu will appear. 4. Press 1 . The Set Time and Date screen will appear. 5. Follow the blinking prompt on the screen to set the date and time. Use the numerical keys to enter information. As you enter each item of information, the prompt will automatically go to the next item. If you don’t need to change the information for a particular item, press SELECT (Mute button) to move to the next item. You will enter the following items of information: Hour • Enter only the hour. For example, if the time is 4:28, enter 0 4. Minute • Enter only the minute. For example, if the time is 4:28, enter 2 8. AM or PM • Enter 1 for AM or 2 for PM. Month • January is 01, October is 10, etc. CHAPTER 2 - OPERATING YOUR DUAL-DECK VCR 15 Date • Enter the day of the month. For example, if today is the fourth, enter 0 4. Year • Enter only the last two digits. For example, 9 6 for 1996. 6. If you need to go back and change anything, press (Mute button) repeatedly until you get to that item. SELECT 7. When you have ...

Download now

Please, enter two numbers from picture: